Global 695746 User manual

globalindustrial.ca
Distribucion Industrial Globales S DE RL DE CF
Instruction Manual Manual de Instrucciones Manuel d'instruction
Customer Service
US: 1-800-645-2986
Servicio de atención al Cliente
México: 01.800.681.6940
Service à la clientèle
Canada: 888-645-2986
1
Non-Contact Digital
Infrared Forehead Thermometer
Temperature Range: 91.4°-109.4°F (33°-43°C)
Measuring Distance Range: 1-1/6 – 2 in.
Power Supply: DC 3V - 2 AAA batteries (not included)
Response Time: 1 Second
Memory Data: 20 Records
High-Fever Warning: 5 Beeps
Display: Blue LED
Low Battery Alarm: Yes
Product Weight: 1/4 lb. (excluding batteries)
Product Dimensions: 6.1"L x 3.5"W x 1.7"H
Certification: FDA
Ambient Temp. Working Range: 60°-95°F (16°-35°C)
Specifications
Model 695746
Read entire manual before operation. For additional
questions or concerns, contact Global Industrial Customer
Service at 1-800-645-2986 or visit www.globalindustrial.com.
WARNING
• Product to be used in ambient temperatures between
60°-95°F (16°-35°C).
• DO NOT use this product in an environment with a relative
humidity greater than 93%.
• DO NOT place this product too close to the electromagnetic
range, (examples: radio, mobile phone, etc.).
• DO NOT expose to excessive heat or water.
• DO NOT use if product is damaged.
• Sweat, hair, hats, or other foreign matter on the forehead
can affect the accuracy of the measurement.
• Ensure the measurement distance is within 1 to 2 inches.
• Contact Global Industrial if there are any problems with
the thermometer, DO NOT attempt to do any repairs yourself.
• Keep this manual for future use.

Instruction Manual
2
①
②
③
④
⑤
⑥
⑦
⑧
① LCD Display
②Function Button
③“+” Button
④“-” Button
⑤Infrared Sensor
⑥Measurement Trigger
⑦Handle
⑧Battery Cover
Operation Instructions
1. Insert batteries: slide open the battery cover and insert two AAA batteries (not included)
at the bottom of the thermometer. Close the battery cover.
2. The thermometer will start with a beep.
3. Tap the FUNCTION button to switch between “body” and “surface” temperature modes.
4. Measure forehead temperature by pressing the MEASUREMENT TRIGGER. For best
result, the thermometer should be 1 to 2 inches away from the forehead.
5. Press “+” or “-” buttons to review the last 20 measurement results.
6. Press and hold the FUNCTION button for 3 seconds to access the function modes.
The thermometer can be switched to the 4 different modes in the following sequence,
by tapping the FUNCTION button:
- F1: °F or °C unit mode - Press “+” or “-” button to select.
- F2: Max. temperature alarm mode; press “+” or “-” button to select.
- F3: Display data offsetting mode; press “+” or “-” button to select.
- F4: Buzzer sound activate/deactivate mode; press “+” or “-” button to select.
Note: Pressing the MEASUREMENT TRIGGER button will exit during any set up mode.
7. The thermometer will automatically shut-off when idle and will turn back on by pressing
any button.
Component Identification
Digital Infrared Forehead Thermometer
Product Maintenance
Note: Be gentle and use extra precaution when cleaning the infrared sensor.
• Do not use abrasive cleaners to clean this product.
• Do not submerge the product into water or other liquids.
• Keep the product in a dry place to avoid dust, pollution and direct sunlight.
• Clean regularly using a dry soft cloth. If needed, use a damp cloth with water or a neutral
detergent to clean, then wipe dry with a clean cloth.