info@glomex.us
Please read the following page before attempting installation to ensure complete understanding of the RA1225HP
VHF Antenna.
The RA122 HP antenna is a high performance 2,4m (8’) VHF antenna designed to transmit and receive on Marine VHF
channels. It is equipped with 6m (20’) RG-8X coax cable with a pre-wired FME connector and PL2 9
adaptor/connector for easy installation.
FEA URES
•Brass radiators for maximum transmit and receive performance
•White 2,4m (8’) marine VHF antenna with 6dB Gain
•1"-14 stainless steel ferrule
•Equipped with 6m (20’) RG-8X coax cable with pre-wired FME connector
•Equipped with PL2 9 adaptor/connector
ACCESSORIES (NO included)
RA107SSFME
INS ALLA ION
For best performance:
•The antenna should be mounted as high as possible (VHF signal is line of sight so height matters).
•Please keep the VHF Antenna’s cable away from other cables.
•Please keep the antenna vertical for the best performance.
•Please keep the antenna away from large metal objects and other radiating devices like RADAR, TV and GPS and
other antennas (minimum distance: 1m / 3,3‘).
•Pay Attention: the miminum bend radius must be 6cm (2.4’’)
•To install the PL2 9 adaptor/connector on the RG-8X coax cable, fit the PL2 9 adaptor on the FME connector and
screw the nut counter clockwise (no soldering required).
SPECIFICA IONS
FREQUENCY RANGE 1 6MHz to 162MHz DC GROUND Yes
GAIN AVERAGE 6 dB MAX INPUT POWER 100 W
IMPEDANCE 0 ohms ANTENNA LENGHT 2,4m (8’)
POLARIZATION Vertical ANTENNA WEIGHT 7 0g (26,3 oz)
ELEMENTS Brass and copper TERMINATION 6m (20’) RG-8X coax cable +
PL2 9 adaptor/connector
SWR at 1 6.8MHz 1.3 FERRULE 1"x14
Performance specifications are nominal and unless otherwise indicated, are subject to change without notice.