Glowskin O+ R79 User manual

B31-01-154-020
VER:1 0
USER MANUAL

~1~
This product does not belong to medical,
please don’t use for disease treatment!
It forbids others to change and maintain the machine except the professional
people.
Please contact us if there is any trouble during operation.
Please read the instruction in detail and keep it well for further reading and
consulting.
Please follow the instruction to fit and operate the machine correctly.
Please do not remove and change any accessories of the machine.
It forbids others to open and remove the mainframe except the authorized people in
the company.
Dear user:
Thanks for using our company's products, in order to fully make use of the products,
we sincerely suggests follow:
Warning
◆◆
◆◆
◆◆
◆◆
◆◆
◆◆

~2~
1.Touch screen
7.General power switch
10.Distilled water level window
12.Distilled water outlet
8.Power supply lines
2 . Ro ta ry e n co de r a dj u st me nt
knob/confirming button
3.Output indicator
4.Accessories frame
5.Upgrade socket
6.fingerstall jack
9.Distilled water inlet
11.Ice carving head handle jack
13.Overflow
1
2
3
4
5
69
11
12
7
8
10
13
fingerstall put area
Parts Introduction
Any part of instrument made of PMMA material (for example: accessories shelf,
panel, transparent handles,etc.). Do not use alcohol or corrosive solvent to wipe
clean.

Fingerstall(L M S)
Ice carving head handle
1.The distilled water should be cleared before transportation.
Insert the plug of silicone tube with seal ring into socket [12] distilled
water outlet. Discharge the distilled water and shake the apparatus to help the liquid clean out
completely. And then use thumb to press the spring, pull out the silicone tube.
2.Method:
3.One the plug of silicone tube insert into inlet and the other plug of it insert into overflow
during transportation. Remove the silicone tube when in normal use in case that effect
the vacuum of cryolipolysis handle.
Notice: While discharging the distilled water, the handle should be placed at the handle
support.
~3~
Spring
Set box
Transport Preparation

~4~
(3)In the interface as (Fig 1)Click on “Items” to enter operating interface.
(1)Click on “Basic setting” to select Language, set Date and Time.
Attention: The “Advanced setting” is only for manufacturer, Users do not use.
4.This machine can click the keys on the touchscreen to set the working parameters, it
also can use [2]Function selecting knob & Confirming button to set. The detail operation
method as follows: Turn the knob when you choose the function, the icon
1.Put the accessories away and connect them to the
mainframe.
(2)Insert the [6] jack;fingerstall into
2.Insert the plug of Power supply line into [8] socket,
turn on Power switch [7].input default password
“000000” to enter interface as shown in (Fig 1).
(1)Insert the [11] jack;Ice carving head handle into
3.In the interface as (Fig 1):
“ ” move to the right place, then press the knob[2] once to confirm.
5.This use’s manual use touchscreen for example.
(Fig 1)
Basal Operation
1.Use distilled water or deionized water;
2.Make sure the distilled water outlet[12] is closed;
5.After filling it with water, take off the funnel.
4.Add distilled water or deionized water from the funnel;
3.Use special funnel to connect to Distilled water inlet [9];
NOTE:
3.If do not use the apparatus 15 days or above, we are recommended to put the
distilled water clean and clear.
1.Add about 500~700ml distilled water or deionized, change the water after one
week.
2.When could not add into the distilled water, please open the distilled water
outlet[12], Add the distilled water and observe the valve. when the liquid is
smooth outflow, blocked it and continue to fill...
Add Distilled Water Steps

2. Clean and care parts.
3. The default channel of the system is "L" finger cuff,
and L (left hand) and R (right hand) finger cuff are
selected according to the nursing site.Both can be
done at the same time
1. Click "goldfinger" in the interface as shown in figure
1 to enter the nursing interface as shown in(fig 2).
4.Set work time. › The system default is 30 minutes. Click on “ ” and
“ ” minutes. Each part about 10 to 20 minutes.‹ adjust. The range is 1 to 120
6.Set Q-IR mode. The system default is ON. Click on is “Off” and “ ”adjust. The rang
“ON”.
operation steps
5.Set intensity. The system default work intensity is 1. › ‹ adjust. The Click on “ ” and “ ”
range is 1(waak) to 10(strong).
7. “ ”adjust. The rangSet the vibration。The system default is ON. Click on is “Off” and
“ON”.
9.Apply gels on operating parts. Click on “Start” , If you need to pause, Click on “Pause”.
13.Please turn off the general power switch and unplug the power supply line. Then
clean the finger covers with a clean towel.
8.Set depth. The system default is Shallow. Click on is “Deep” and “ ”adjust. The rang
“Shallow”.
11.The system will pause automatically if setting time is over.
10.The beautician holds the handle and moves slowly in circle. Do not stop at the same
parts without operating.
12.Clean the leftovers on skin with warm water.
Cautions:
1.Do not wear any aglet, both for the beautician and the users.(Contraindications for
other items)
2.The electrode probe must be fully in contact with skin.
3.Do not make the electrode stay on any part without moving. Keep it moving on skin slowly.
14.Click on “Return” to return to (Fig 1).
4.Skin around eyes and forehead is very thin, the output intensity should be relatively weakened.
5.Do not let the Q-IR light straightly shine upon the eyes in case of eyes hurt.
~5~
(fig 2)
GoldfingerTreatment

~6~
10.Clean the leftovers on skin with warm water.
8.The beautician holds the handle and moves slowly in circle. Do not stop at the same
parts without operating.
3.Do not make the electrode stay on any part without moving. Keep it moving on skin slowly.
4.Set work time. The system default is 30 minutes.
Click on “ ” and “ ” minutes. Each
› ‹ adjust The range is 1 to 120
part about 10 to 20 minutes.
Cool and Heat Treatment operation steps
11.Please turn off the general power switch and unplug the power supply line. Then clean
the finger covers with a clean towel.
1. Click "ice sculpture" in the interface as shown in
figure 1 to enter the nursing interface as shown in (fig
3).
2. Clean and care parts.
2.The electrode probe must be fully in contact with skin.
7.Apply gels on operating parts. Click on “Start” , If you need to pause, Click on “Pause”.
5.Set cool temperature. Click on “Temperature”. The system default time is 5℃, click on
“<<” and “>>” to regulate, the range is negative 5℃to 20℃.
6.Do cool treatment according to zone, and adjust appropriate required temperature.
4.Skin around eyes and forehead is very thin, the output intensity should be relatively weakened.
3.The system default is “Cool” therapeutics.Click
"heat" to select heat therapy.
9.The system will pause automatically if setting time is over.
5.Do not let the Q-IR light straightly shine upon the eyes in case of eyes hurt.
12.Click on Return to return to Fig 1
Cautions:
Set Heat temperature he system default time is37℃, click on “<<” and “>>” to regulate,
the range is negative 37℃to 55℃.
1.Do not wear any aglet, both for the beautician and the users.(Contraindications for
other items)
(fig 3)
Cool & Heat Treatment

~7~
3.Other people DO NOT touch the operator and customer during treatment time.
2.Other people DO NOT touch the electrode flat when the machine is operating.
5.The plane of electrode probe must fully cling to the skin in the treatment time, but it can't be
slant in use, because the electrode probe head doesn't correctly touch the skin, which will
produce uncomfortable feeling and burn the skin.
1.The gamepad function can only be started when the gamepad is correctly connected to
the host computer.
1.Don't operate the machine on the electriferous floor.
4.The operator and customer DO NOT be with the metal decoration during in treatment time.
6.The electrode probe is moved on the skin by the circulation way, but don't stop on one part .
3.People with hemorrhagic disease, trauma or who is bleeding.
2.Patients with acute inflammation, asthma, deep vein thrombosis, thyroncus, cancer.
8.People with an abnormal immune system.
1.People with heart disease or high blood pressure, or configured cardiac pacemaker.
5.Medical Plastic parts, or parts with artificial in filling inside.
6.People with metal inside the body(include metallic tooth)
7.Patient with skin inflammation or with edema.
9.Numb or insensitive to heat.
4.Pregnant women and child
1.Before turn on the system, please click on the screen, don't move the finger, then turn
on the Power Switch.
2.The prompts “Err0" is on the screen, “After releasing the key, we enter into the
calibration procedure, Operating under the prompts of the screen”. Then release your
finger now.
4.Calibration screen is finished, the system enter “input password” interface.
3.Operating under the prompts: Press the cross dot in left-top “+”. Press the cross dot in
right-top “+”. Press the cross dot in right-bottom “+”. Click on the point (left top). Click
on the point (right bottom).
Cautions During Treatment
Forbidden Group
Touch Screen Calibration

~8~
QC
11.Silicone tube
9.Hexagonal screw wrench（M4)
7.Accessory frame
4.Ice carving head handle
10.Set box
2.Large fingerstall
3.Small fingerstall
5.Power supply line
1.Host
6.User manual
8.hexagonal screw
1SET
2PCS
1PC
2PCS
2PCS
2PCS
1COPY
1PC
1PC
2PCS
1PC
□
□
□
□
□
□
□
□
□
□
Output Power: 120VA
Fuse: FL5X20\3.15Awith buffer (with spare fuse)
Input Voltage:AC100~240V 50/60Hz□
TechnicalParameters
Packing List

~9~
Symbols and Meanings
*Things damage refers to housing, property, livestock and pet damage.
Warning Symbol
Danger
Danger
Waning
Waning
Attention
Device exists high pressure risk of high voltage output terminals!
If used incorrectly will cause personnel injury!
If used incorrectly will cause personnel injury or damage to the goods!
If used incorrectly will cause possibility ill of death or serious injury!
If used incorrectly will bring the risk of death or serious injury!
Meaning
Contraindications
Danger
Warning
1.The following symptoms were forbidden to use
(3)Drunk or high fever patients;
(7)Severe hypertension and severe patients with cardiovascular and
cerebrovascular disease.
(1)Patients who used by Heart rate regulator, cardiac pacemaker, ECS;
(2)The use of artificial bone; Patients with silicosis;
(4)Patients with higher sensitivity mental disease and epilepsy patients
(5)Patients with no independent expression consciousness and can not take
care of themselves.
(6)Patients with metal materials in body (including metal teeth), pregnant
women, cachexia, malignant tumor.
(8)Patients with renal failure.
(9)Patients with severe infection
2.The following please use under the guidance of professionals
(1)Women during menstruation;
(2)Children;
(3)Hemorrhagic disease or trauma, inflammation, skin disease, skin infection;
(4)Patients with feeling numb, no response to cold and heat;
(5)The immune system has defects, scar formation history, physical disease;
(6)The people who has taken face-lifting or her body has artificial thing.

~10~
1.Appliances and medical equipment close to the machine may be resulting in operational failure
due to interference.
――Hot and humid environment
――Dusty environment
3.If there comes a failure, please shut down the power immediately, and send it to the distributor
or manufacturer for maintenance. Do not repair by yourself.
2.Prohibit use of the equipment in the following environment
――Environmental with much smoke or stream
4.Exclusion of liability.
The Company is not responsible for the following circumstances:
(1)If fire, earthquake, war occurred;
(3)Damage caused by using other method(not included in the use manual).
(2)The fault of the user, operator error;
(4)Operate without the manual's guide.
5.Do not make the machine close to the wall, keeping a 30CM space around for cooling.
Maintenance
Safety and Environmental Considerations
Plastic Board
Printed Circuit
Board
Declaration:
The content of the restricted substances in all homogeneous materials of this part is below the limits set
by the SJ/T11363-2006 standard.
The content of a homogeneous material in the part of the material is beyond the SJ/T11363-2006 standard
requirements. The user's normal use of this product within the time limit of environmental protection, these
substances or elements will not occur leakage or sudden change, will not cause the personal, property damage.
For such substances or elements, the user shall not dispose of it yourself, please according to government
regulations to the relevant departments of the government designated recycling.
Power Supply
Accessory
Toxic and hazardous substances reference list
Electronic information product pollution control and management measures
Table of contents of toxic and hazardous substances or elements
Part Name Remark
Toxic and Hazardous Substance or Element
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
chromium
(Cr(VI))
Polybrominated
biphenyls
(PBB)
Polybrominated
diphenyl ethers
(PBDE)