GM Lighting Lux Control SHWO Technical specifications
®
SHWO Smart Home Outlet
Installation and
Programming Instructions
DOWNLOADING,
INSTALLING and
CONNECTING the
LUXcontrol APP to
YOUR HANDHELD
DEVICE
GM Lighting’s LUXcontrol
app is a free utility that
enables total control
over your residential
or commercial lighting
application, along with
other appliances that the
app may find.
Follow the step by step
instructions at right. If
you are having diculty,
check your Wi-Fi
connection and insure
that your SHWO Smart
Home Outlet is installed
correctly and is manually
able to dim your lighting.
1. Download and install
the App LUX Control
2. Open the App and
press “Add Device”
3. Press “Auto Scan” on
top to start pairing
4. During Auto Scan, cycle
dimmer On/Off 3 times.
Outlet will be recognized.
5. Found Outlet! Press
“Next”.
6. Outlet added! Press
“Done” at upper left.
3. Press the paired
Outlet.
Ready to configure and use!
PAIRING YOUR OUTLET TO VOICE CONTROL
GM Lighting’s LUXcontrol is your gateway to enabling
Smart Home lighting control. Once you have the
outlet recognized by the LUXcontrol app (see set-up
instructions at right), follow your Alexa® or
GoogleHome™ instructions to introduce LUXcontrol
lighting to your Smart Home voice system.
If you still have questions or need extra help, we’re
here for you! See our website:
www.gmlighting.net
BEFORE YOU START:
Download GM’s LUXcontrol™ app from the App Store or
Google® Play. Or, scan the QR code for auto
download. We will guide you through programming
after we help you install your dimmer.
KEY SPECIFICATIONS
Input: 100-130VAC, 60Hz
Single Output: 10A Max. / Socket
Total Output: 15A Max.
USB Output: 5V/ 2.1A
Working Temperature: -4°F - 120°F
W-Fi Frequency: 2.4Ghz only
No hub required
UL60950, UL498, FCC Part15
Android™ compatible
iOS® compatible
Works with Google Assistant™
Works with Amazon Alexa™
Amazon, Alexa and all related logos are trademarks of Amazon.com,
Inc. or its aliates. ‘iOS’ is a registered trademark of Apple.
SYSTEM REQUIREMENTS
Existing Wi-Fi 2.4GHz Network
Existing single pole circuit and outlet box
with neutral wire
Mobile device running IOS® 10.0 or higher,
Android™ 8.0 and above
GM Lighting LUXcontrol™ App (see ‘Before You Start’)
OUTLET INSTALLATION:
The SHWO is a ‘smart’ outlet that is designed to replace
a standard wall outlet using existing wiring. The SHWO
provides a two USB power sockets. SHWO outlet can be
controlled via the LUXcontrol app.
Turn the POWER OFF at the circuit breaker before
installing the dimmer. Read and understand these
instructions before installing. This device is intended
for installation pursuant to National Electric Code and
local regulations. We recommend that you use a
qualified electrician or electrical contractor to install.
WIRING and PROGRAMMING DIRECTIONS
1. Remove existing wall outlet and orient SHWO outlet
in the proper position, with Wi-Fi Pairing button as your
guide. (FIG. 1)
3. Connect the 120V power wire to the HOT terminal on
the SHWO outlet (FIG. 2)
4. Connect the neutral wire WHITE to the NEUTRAL
terminal on the SHWO outlet (FIG. 2)
FIG. 1
FIG. 3
FIG. 1
5. Connect GREEN ground wire to the GR terminal
on the SHWO outlet (FIG. 2)
6. Push SHWO outlet into place making sure that
wires are securely connected and screw to outlet box.
7. Wall plate screws onto SHWO outlet (FIG. 5). Also
can accomodate standard. Decora plates.
FIG. 2
FIG. 3
Other GM Lighting Accessories manuals
