GM Lighting SHWD Technical specifications

®
SHWD Smart Home Dimmer
Installation and Programming
Instructions
DOWNLOADING,
INSTALLING and
CONNECTING the
LUXcontrol APP to
YOUR HANDHELD
DEVICE
GM Lighting’s LUXcontrol
app is a free utility that
enables total control
over your residential
or commercial lighting
application, along with
other appliances that the
app may find.
Follow the step by step
instructions at right. If
you are having diculty,
check your Wi-Fi connec-
tion and insure that your
SHWD Smart Home Dim-
mer is installed correctly
and is manually able to
dim your lighting.
1. Download and install
the App LUX Control
2. Open the App and
press “Add Device”
3. Press “Auto Scan” on
top to start pairing
4. During Auto Scan, cycle
dimmer On/Off 3 times.
Dimmer will be recognized.
5. Found Dimmer! Press
“Next”.
6. Dimmer added! Press
“Done” at upper left.
3. Press the paired
Dimmer.
Ready to configure and use!
PAIRING YOUR DIMMER TO VOICE CONTROL
GM Lighting’s LUXcontrol is your gateway to enabling
Smart Home lighting control. Once you have the
dimmer recognized by the LUXcontrol app (see set-up
instructions at right), follow your Alexa® or
GoogleHome™ instructions to introduce LUXcontrol
lighting to your Smart Home voice system.
If you still have questions or need extra help, we’re
here for you! See our website:
www.gmlighting.net
Amazon, Alexa and all related logos are trademarks of Amazon.com,
Inc. or its aliates. ‘iOS’ is a registered trademark of Apple.

BEFORE YOU START:
Download GM’s LUXcontrol™ app from the App Store or
Google® Play. Or, scan the QR code for auto
download. We will guide you through programming
after we help you install your dimmer.
KEY SPECIFICATIONS
Color: White
Electrical Rating: 100-240V AC
Rated Current: 3A
Working Temp: -4°F – 120°F / -20°C – 50°C
Wi-Fi Frequency: 2.4Ghz only
Max. Output: 300W INC – 150W LED
SYSTEM REQUIREMENTS
Existing Wi-Fi 2.4GHz Network
Existing single pole circuit and outlet box
with neutral wire
Mobile device running IOS® 10.0 or higher,
Android™ 8.0 and above
GM Lighting LUXcontrol™ App (see ‘Before You Start’)
DIMMER INSTALLATION:
The SHWD is a dimmable LED dimmer that is designed to
replace a standard light switch using existing wiring. The
SHWD provides a wide dimming range and is suitable for
multi-gang installations. All dimmers can be controlled via
the LUXcontrol app.
Turn the POWER OFF at the circuit breaker before
installing the dimmer. Read and understand these
instructions before installing. This device is intended
for installation pursuant to National Electric Code and
local regulations. We recommend that you use a
qualified electrician or electrical contractor to install.
WIRING and PROGRAMMING DIRECTIONS
1. Remove existing wall switch (FIG. 1)
2. Mount SHWD dimmer so that RE-SET switch is on
bottom (FIG. 2)
3. Connect the 120V power wire to the BLACK wire on
the SHWD dimmer (FIG. 3)
4. Connect the neutral wire WHITE to the WHITE wire on
the SHWD dimmer (FIG. 3)
5. Connect the brown wire to the load wire (light) (FIG. 3)
6. Connect GREEN wire on the SHWD dimmer to ground
7. Push dimmer into place making sure that wires are
securely connected and screw to outlet box (FIG. 4)
8. Wall plate clips onto SHWD dimmer, locking securely
in place (FIG. 5). Also can accomodate std. Decora plates.
FIG. 1
FIG. 2
FIG. 3
FIG. 4
FIG. 5
Wall Outlet