GME BCM002 User manual
OPERATING MANUAL
BCM002
6-Bay Multi Charger
to suit CP40/CP50, TX6600PRO, TX6600S
2 OPERATING MANUAL BCM002
CONTENTS
IN THE BOX ........................................................................................3
COMPATIBLE RADIOS & BATTERIES....................................................3
GENERAL SAFETY OPERATIONAL INSTRUCTIONS................................3
OTHER KEY SAFETY AND OPERATIONAL INFORMATION.....................3
QUICK START GUIDE ...........................................................................4
LCD MENU GUIDE................................................................................5
OPERATIONAL TEMPERATURE GUIDE .................................................6
TROUBLE SHOOTING...........................................................................6
GME WARRANTY AGAINST DEFECTS ..................................................7
BCM002 OPERATING MANUAL 3
IN THE BOX
• BCM002 Charging Base with 6 Charging Pockets
• AC Charger Lead
• DC Charger Lead
COMPATIBLE RADIOS & BATTERIES
The BCM002 is compatible with GME Portable radios that use the BP028 battery
pack:
• TX6600S
• TX6600Pro
• CP40
• CP50
GENERAL SAFETY OPERATIONAL INSTRUCTIONS
For faults, warranty claims or replacement battery packs, please contact your
Authorised GME Commercial dealer or Authroised GME Reseller.
WARNING: Improper use may result in the damage of property, personal injury,
and death.
When in operation, the BCM002 is to be:
aIndoors in an ambient temperature of less than 40 ˚C
aOn a clean, solid, and horizontal surface
aIn an open, well ventilated, and dry space
aAt least 10 centimetres (4 inches) distance between the BCM002 and all walls
aAway from foot trac
The BCM002 is not to be operated:
• Outdoors or exposed to direct sunlight
• During severe weather, electrical or thunderstorms
• In a closed container or poorly ventilated enclosed space
• In or near wet or damp areas
• On or near carpet, paper, cardboard, or other ammable materials
OTHER KEY SAFETY AND OPERATIONAL INFORMATION
• Do not insert metal or other conductive materials into the BCM002
• Remove all batteries / radios and disconnect the BCM002 from its power source
before moving or relocating the BCM002
• To clean the BCM002, disconnect the BCM002 from its power source and use
a soft water moistened cloth to gently clean. Do not use benzene, thinner,
pesticides or any abrasive cleaning solutions
• Ensure the BCM002 power cord does not become a trip hazard
4 OPERATING MANUAL BCM002
QUICK START GUIDE
1. Connect the BCM002 to AC Power or DC Power with correct (supplied in box) AC
or DC Lead
• AC input Voltage 100-240V±10%. Frequency 50-60Hz
• DC Input Voltage 12V-24V±10% minimum 6 Amp current capacity
• Charger Output: Electric current (maximum) 1000mA±5% (DC)/per station
2. Flip the power switch to AC or DC Power.
DC
OFF
AC
• All empty BCM002 pockets will turn RED for 2 seconds to indicate the
BCM002 is powered on.
• All empty BCM002 pockets will state “INSERT BATTERY” on the
corresponding LCD
3. Insert a Compatible Radio / Battery
• See Compatible Radios & Batteries
• LCD will display “READ DATA” followed by “RAPID CHARGE”
BCM002 OPERATING MANUAL 5
QUICK START GUIDE (CONT.)
4. During charging the LCD Screen also intermittently displays the “Battery Voltage”
5. A compatible at battery pack will fully charge in approximately 4.5 hours.
• LED of the pocket with a fully charged battery will turn GREEN
• LCD will display “BATTERY FULL”
LCD MENU GUIDE
BCM002 Charger /
Pocket Status
LCD Display LED Colour / Status
Power On INSERT BATTERY RED on for 2 Seconds
then o
Battery Charging RAPID CHARGE RED (solid)
Battery Fully Charged BATTERY FULL GREEN (solid)
Overheat * ALARM TEMPERATURE ORANGE (ashing)
6 OPERATING MANUAL BCM002
OPERATIONAL TEMPERATURE GUIDE
• The BCM002 is to be operated in ambient temperatures of less than 40 ˚C
• The following table provides the approximate maximum temperature the
BCM002 will reach when charging 6 x at battery packs over a 4.5-hour period
• The table also shows the resting temperature of 6 x fully charged battery packs
stored in the BCM002.
Ambient Room
Temperature
BCM002 Charging Max
Operational Temperature*
BCM002 Resting
Temperature
20˚C - 25˚C 35˚C -40˚C 25˚C- 30˚C
25˚C - 35˚C 40˚C - 45˚C 30˚C - 35˚C
35˚C - 40˚C 45˚C- 50˚C 40˚C - 45˚C
*Note: If the BCM0002 exceeds the operational temperature of 55 ˚C the BCM002
will stop charging and will re-commence charging once at a safe operational
temperature.
TROUBLE SHOOTING
Issue Indicator Solution
No Power LED does not
illuminate RED for 2
seconds
Ensure Power Cord is rmly
connected to power socket
and turned on
Battery Not Recognized LCD screen remains
“INSERT BATTERY”
Ensure a compatible radio/
battery pack is inserted:
See Compatible Radios &
Batteries
Ensure battery pack
terminals on back of battery
pack are clean.
Battery Not Charging LED Flashes RED Battery pack is damaged
resulting in no or low
voltage. Battery pack is to be
replaced.
For faults, warranty claims or replacement battery packs, please contact your
Authorised GME Commercial dealer or Authroised GME Reseller.
BCM002 OPERATING MANUAL 7
GME WARRANTY AGAINST DEFECTS
This warranty against defects is given by GME Pty Ltd ACN 000 346 814 (We, us, our or GME).
Our contact details are set out in clause 2.7. This warranty statement only applies to products purchased in
Australia. Please contact your local GME distributor for products sold outside of Australia. Local distributor
details at www.gme.net.au/export
1. Consumer guarantees:
1.1 Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and for compensation for any
other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the failure does not amount to a
major failure.
1.2 To the extent we are able, we exclude all other conditions, warranties and obligations which
would otherwise be implied.
2. Warranty against defects:
2.1 This Warranty is in addition to and does not limit, exclude or restrict your rights under the
Competition and Consumer Act 2010 (Australia) or any other mandatory protection laws that
may apply.
2.2 We warrant our goods to be free from defects in materials and workmanship for the warranty
period (see warranty table) from the date of original sale (or another period we agree to in
writing). Subject to our obligations under clause 1.2, we will at our option, either repair or
replace goods which we are satisfied are defective. We warrant any replacement parts for the
remainder of the period of warranty for the goods into which they are incorporated.
2.3 To the extent permitted by law, our sole liability for breach of a condition, warranty or other
obligation implied by law is limited.
(a) In the case of goods we supply, to any one of the following as we decide –
(i) The replacement of the goods or the supply of equivalent goods.
(ii) The repair of the goods.
(iii) The cost of repairing the goods or of acquiring equivalent goods.
(b) In the case of services we supply, to any one of the following as we decide –
(i) The supplying of the services again
(ii) The cost of having the services supplied again.
2.4 For repairs outside the warranty period, we warrant our repairs to be free from defects in materials
and workmanship for three months from the date of the original repair. We agree to re-repair or
replace (at our option) any materials or workmanship which we are satisfied are defective.
2.5 We warrant that we will perform services with reasonable care and skill and agree to investigate
any complaint regarding our services made in good faith. If we are satisfied that the complaint is
justified, and as our sole liability to you under this warranty (to the extent permitted at law), we
agree to supply those services again at no extra charge to you.
2.6 To make a warranty claim you must before the end of the applicable warranty period (see warranty
table), at your own cost, return the goods you allege are defective, provide written details of the
defect, and give us an original or copy of the sales invoice or some other evidence showing details of
the transaction.
GME WARRANTY AGAINST DEFECTS (CONT.)
Before returning any goods you will be required to follow the available options:
A customer support team member will troubleshoot and validate if your product is faulty. If so, they will email
you a product RMA (Return Material Authorisation).
Products that are authorised to be returned to GME must include the following:
RMA form (Return Material Authorisation)
A copy of your proof of purchase, the faulty product, including all accessories
2.7 Send your claim to:
New Zealand
GME Communications (NZ) Limited
Unit A, 11 Echelon Place, East Tamaki
Auckland 2013, New Zealand
T: (09) 274 0955 | F: (09) 274 0959
Australia
GME Pty Ltd
17 Gibbon Rd, Winston Hills
NSW 2153, Australia
T: (02) 8867 6000 | F: (02) 8867 6199
2.8 If we determine that your goods are defective, we will pay for the cost of returning the repaired
or replaced goods to you, and reimburse you for your reasonable expenses of sending your
warranty claim to us.
3. What this warranty does not cover:
3.1 This warranty will not apply in relation to:
(a) Goods modified or altered in any way.
(b) Defects and damage caused by use with non GME products.
(c) Repairs performed other than by our authorised representative.
(d) Defects or damage resulting from misuse, accident, impact or neglect.
(e) Goods improperly installed or used in a manner contrary to the relevant instruction manual;
or
(f) Goods where the serial number has been removed or made illegible.
4. Warranty period:
4.1 We provide the following warranty on GME Commercial Products. No repair or replacement
during the warranty period will renew or extend the warranty period past the period from
original date of purchase.
Product Type Warranty Period
BCM002 1 Year
D/N: 52764-1 P/N: 311169
GME Pty Ltd.
17 Gibbon Road, Winston Hills NSW 2153, Australia
gmecommercial.com.au
Table of contents
