Go-Go Babyz Infant Cruizer User manual

Infant Cruizer Toddler Adapter
Safety, Assembly &
Operating Instructions
Model #IC_TOD
Go-Go Babyz Corporation

Thank you!
Thank you for your recent order. We wish you many happy travels
with your new Infant Cruizer for Toddlers!
Our goal at Go-Go Babyz is to offer innovative, high quality and
safe products to make life easier when you and your baby are “on
the go.”
We welcome suggestions and comments. Go-Go Babyz is
dedicated to making our current products and features easier to
use. Please send ideas for new features or general feedback to us
In addition, we have created a photo gallery on our web site for
families, like us, using Go-Go Babyz products. Please feel free
to email or mail us any photos of you and your children using our
products and we would be happy to share them on our Family
Photo Gallery page.
Thank you again for your purchase. We appreciate your business.
Sincerely,
The Go-Go Babyz Family
Toll Free: 888.686.2552
www.gogobabyz.com
THANK YOUii

Safety .............................................................................................4
QUICK ASSEMBLY GUIDE ........................................................... 5
Before Assembling the Toddler Adapter .......................................... 6
General Instructions for Assembling ............................................... 7
Assembling the Toddler Adapter..................................................... 8
Attaching & Removing Your Convertible Car Seat ....................... 10
Registration & Maintenance ......................................................... 11
Using Your Infant Cruizer.............................................................. 12
Express Limited Warranty ............................................................ 13
TABLE OF CONTENTS iii
Table of Contents

Safety
DO NOT USE the Infant Cruizer until you read and understand
these instructions. Your child’s safety depends on you reading and
following these instructions.
!
WARNING: NEVER LEAVE CHILD UNATTENDED.
!
WARNING: AVOID SERIOUS INJURY FROM
FALLING OR SLIDING OUT. ALWAYS USE THE HARNESS SYSTEM
PROVIDED WITH YOUR INFANT OR TODDLER SEAT AS INSTRUCTED
BY THE MANUFACTURER.
!
WARNING: TO AVOID INJURY ALWAYS USE
BOTH THE FRONT AND THE REAR BRAKES WHEN INFANT
CRUIZER IS PARKED ON A HILL AND POINT INFANT CRUIZER
FACING DOWNHILL. The Infant Cruizer has greater braking power
in the forward direction. You can use the "quick stop" rear brakes if
you are on a at surface.
!
WARNING: IF YOU PARK ON A HILL, DO NOT
LEAVE YOUR HAND OFF THE INFANT CRUIZER.
!
WARNING: THIS IS NOT A JOGGING INFANT
CRUIZER. DO NOT USE THIS PRODUCT WHILE RUNNING,
JOGGING, IN-LINE SKATING OR SIMILAR ACTIVITIES.
!
WARNING: NO PARCEL BAGS OR RACKS
ARE PROVIDED WITH THE PRODUCT. Infant Cruizer may become
unstable if any parcel or racks, not approved by the manufacturer
are used.
!
WARNING: DO NOT EXCEED WEIGHT LIMIT OF
THE INFANT OR TODDLER SEAT SET BY THE MANUFACTURER.
Maximum weight limit of the Infant Cruizer is 45 pounds.
SAFETY4

Quick Assembly Guide:
# 1 Remove infant seat Adapters from the bottom of the Infant Cruizer base.
# 2 Snap Toddler Adapter in place.
# 3 Screw down Toddler Adapter onto
Infant Cruizer base with the four screws
included in the box.
# 4 Remove 2 screws, ladder strap
and buckle strap from bag and attach
in the rear (gure 1).
Using with a Convertible/Toddler Car Seat:
# 5 Place toddler seat on the base
facing forward. (gure 2)
# 6 Thread ladder straps through front
and rear openings of the toddler seat.
# 7 Tighten straps with ratchet buckle
until seat does not move. Adjust strap
length as needed.
#8 Removal:Pull on the ratchet
release mechanism with your thumb
and pull strap out from your
Convertible car seat.(gure 3)
Repeat for both straps.
QUICK ASSEMBLY GUIDE 5
gure 1
gure 2
gure 3

Before Assembling
PLEASE READ THOROUGHLY PRIOR TO ASSEMBLING THE
TODDLER ADAPTER TO YOUR INFANT CRUIZER.
REPORT SHIPPING DAMAGE IMMEDIATELY. IF YOU HAVE
RECEIVED THE PRODUCT IN THE MAIL AND THE BOX APPEARS
DAMAGED, PLEASE INSPECT IT AND REPORT ANY DAMAGE TO GO-
GO BABYZ BEFORE THROWING AWAY YOUR BOX. GO-GO BABYZ
WILL FILE A CLAIM DIRECTLY WITH UPS OR OTHER FREIGHT
CARRIERS AND WILL REPLACE THE PRODUCT AT NO EXTRA COST.
PLEASE CALL A GO-GO BABYZ CUSTOMER REPRESENTATIVE TOLL
FREE AT 888.686.2552 OR LOCAL 408.360.0653.
CUSTOMER SERVICE AT GO-GO BABYZ CAN USUALLY RESOLVE
ANY PROBLEM OR ANSWER ANY QUESTION YOU HAVE WITH
ONE PHONE CALL. PLEASE CALL US TOLL FREE AT 888.686.2552
OR LOCAL 408.360.0653 IF YOU HAVE ANY PROBLEMS WITH THE
INFANT CRUIZER.
BEFORE ASSEMBLING6

GENERAL INSTRUCTIONS FOR ASSEMBLING THE TODDLER ADAPTER ONTO YOUR INFANT
CRUIZER. BEFORE ASSEMBLY, PLEASE TAKE A FEW MINUTES TO READ THE SAFETY
WARNINGS AND OPERATING INSTRUCTIONS.
ASSEMBLY INSTRUCTIONS 7
Assembly Instructions
Parts Included In The Box:
1 Toddler Adapter (A) with front buckle
strap and adjustable ladder strap
preassembled.
1 Short Adjustable Ladder Strap (B)
1 Buckle Strap (C)
4 Screws-one shown (D)
(to attach the Toddler
Adapter to the base of the
Infant Cruizer)
2 Screws-shown with ladder & buckle
straps (B&C)
(to attach rear adjustable ladder
strap and rear buckle strap)
2 Long Spacers and 2 Long Screws
(for use with the Triumph car seat only
-not shown)
A
B
C
D

Assembly Instructions
ASSEMBLY INSTRUCTIONS8
2. Take a rag and wipe your base clean
prior to inserting your toddler Adapter.
3. Find the holes on the Toddler Adapter. You
will have 2holes on the shoulder and 4holes
on the bottom.
Place the Toddler Adapter onto the base of the
Infant Cruizer (it will snap into place).
Use a Phillips screwdriver to insert the 4
screws through the bottom of the Toddler
Adapter down to the base of the Infant Cruizer.
Next remove the rear ladder strap, buckle
strap and screws from the bag and place
one of them into the matching holes on the
shoulder of the Adapter. (see top left image on
page 9) Make sure the front and back ladder
straps are on one side (left or right) and both
buckle straps are on the other side before as-
sembling. Use the remaining screws to attach
both the ladder strap and the buckle strap to
the Adapter and the main body of the Infant
Cruizer.
BEGIN BY REMOVING YOUR
INFANT SEAT AdapterS
WIPE THE BASE OF THE INFANT
CRUIZER CLEAN
IDENTIFY WHERE THE SCREW HOLES
ARE ON YOUR TODDLER Adapter
Graco
Adapter
Shown on base of
Infant Cruizer.
Peg Perego
Adapters
Britax
Adapters
Arrows Pointing to
Adapter Holes
1. In order to attach the Toddler Adapter
onto your Infant Cruizer, you must rst re-
move the Infant Seat Adapters from the base
of the Infant Cruizer.
Locate your Infant Seat Adapters by removing
your infant car seat from the Infant Cruizer and
extending the handle into the upright, locked
position.
You will have 4 or 8 Phillips screws (depen-
dent upon which adapter you have) which will
need to be removed. Once the screws are
removed, you can take the Infant Seat Adapt-
ers off the base of the Infant Cruizer and store
for future use.

9
ASSEMBLY INSTRUCTIONS
Below shows: the toddler adapter, rear buckle
& ladder straps attached to Infant Cruizer.
To the right: both the front and back straps go-
ing through the car seat to secure it to
the Infant Cruizer base.
SPECIAL NOTE FOR TRIUMPH CAR
SEAT USERS: Please remove the front
straps and replace spacers with the longer
spacers , which are included in the box.
Below shows one of the front straps attached
to the Toddler Adapter.
Below shows the front strap going through the car seat to stabilize the seat on the Infant
Cruizer. The picture on the right shows it secured with the buckle in the front.
Ladder
Strap

Attaching & Removing Your
Convertible Car Seat
Extend the Infant Cruizer handle into the up-
right, locked position.
Set your Convertible Car Seat onto the Infant
Cruizer facing forward.
Thread the rear adjustable ladder strap (lo-
cated near the handle of the Infant Cruizer)
though the back of the Convertible Car Seat.
(Just like you would thread a car seat belt
when attaching in your car forward facing)
Insert adjustable ladder strap into buckle on
other side of your Infant Cruizer.
Adjust the length of the ladder strap as need-
ed in order to reach the buckle or take up
slack.
DO NOT TIGHTEN UNTIL YOU HAVE
THREADED YOUR FRONT STRAP
THROUGH THE FRONT OF YOUR CAR
SEAT.
Locate the front strap and thread through the
front of your Convertible Car Seat. (Just like
you would thread a car seat belt when attach-
ing in your car rear facing). Insert ladder strap
into buckle.
Use the buckle like a ratchet to tighten the
strap. Adjust the length of the ladder strap as
needed to reach buckle or take up slack.
DO NOT OVERTIGHTEN
SET YOUR CAR SEAT ONTO THE
INFANT CRUIZER
TO REMOVE YOUR CAR SEAT FROM
THE INFANT CRUIZER
Pull on the ratchet release mechanism with
your thumb and pull strap out from your Con-
vertible car seat.(bottom gure) Repeat for
both straps.
ATTACHING10
Straps/Buckles

REGISTRATION AND MAINTENANCE 11
PLEASE REGISTER
By registering your product, Go-Go Babyz will automatically notify
you if there is any unforeseen product recall and we will keep your
name and date of purchase on le for referencing your warranty
information.
CARE & MAINTENANCE:
Periodically check for worn parts or loose screws. Repair or
replace damaged parts immediately. Periodically check that
wheels are secure by pulling on them. Do not store outside.
Registration & Maintenance

1. TO OPEN INFANT CRUIZER
Step 1. Push Button on top of handle (picture A) and
extend handle slightly to remove locking disks from the
docking area.
Step 2. Pull handle up and back until it goes behind the
"spring latch" shown in Picture B.
2. TO OPERATE BRAKE SYSTEM
!
WARNING: ALWAYS USE THE
REAR BRAKE WHEN INFANT CRUIZER IS PARKED,
EVEN ON FLAT SURFACES.
!
WARNING: IF PARKED ON A HILL,
ALWAYS ENGAGE FRONT AND REAR BRAKES AND
POINT INFANT CRUIZER FACING "DOWNHILL."
THE INFANT CRUIZER HAS MORE BRAKING POWER
IN THE FORWARD DIRECTION THAN THE REAR
DIRECTION.
TO LOCK FRONT TOE BRAKES:
Pull Infant Cruizer backwards a little bit to expose caster
brake pedals in the front of the Infant Cruizer and step on
brake pedals until they remain in the locked position as
shown in Picture C.
TO LOCK REAR BRAKE:
Push brake pedal down at any location with your foot until
it locks in place, as shown in Picture D.
TO UNLOCK FRONT TOE BRAKES:
Release the front brakes by pulling up the brake pedals
with your hand.
TO UNLOCK THE REAR BRAKE:
Release the rear brake by pushing up on the brake pedal
with your toe.
12 HOW TO PROPERLY USE THE INFANT CRUIZER
How to Properly Use the Infant
Cruizer
Locking
Discs
Picture A
Picture B
Spring
Latch
Picture C
Front Toe
Brakes
Picture D

EXPRESS LIMITED WARRANTY
Go-Go Babyz Corporation (“Go-Go Babyz”) warrants this product to be free from
defects in materials and workmanship for a period of one year from the date of
purchase. Go-Go Babyz will repair or replace, at its sole option, the defective product
within that one-year time period.
If you have a problem with your Go-Go Babyz product or are not satised with it,
please contact Go-Go Babyz Customer Service at 1.888.686.2552.
This express limited warranty does not cover:
(1) Pick-up, delivery, or freight charges.
(2) Corrosion caused by improper storage or failure to reasonably protect the product
from salt water and adverse conditions.
(3) Deterioration due to lack of maintenance and cleaning as specied in the product
instructions.
Go-Go Babyz SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING FROM BREACH OF ANY EXPRESS
OR IMPLIED WARRANTY ON THIS PRODUCT. ANY IMPLIED WARRANTY,
INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE, IS LIMITED TO THE DURATION OF THE EXPRESS,
LIMITED WARRANTY (ONE-YEAR FROM THE DATE OF PURCHASE).
Under no circumstance shall any liability of Go-Go Babyz under this Express Limited
Warranty, or otherwise, exceed the price of the defective product or parts.
Note: Some states do not allow the exclusion or limitation on incidental or
consequential damages, so the above limitation may not apply to you. Some states
do not allow limitations on how long an implied warranty lasts, so the above limitation
may not apply to you.
This Express Limited Warranty gives you specic legal rights, and you may have
other rights, which vary from state to state.
CONTACT GO-GO BABYZ' CUSTOMER SERVICE FOR INFORMATION AND ALL
RETURNS:
Go-Go Babyz Returns
7013 Realm Drive, Suite C
San Jose, CA 95119
408.360.0653
LIMITED WARRANTY 13
This manual suits for next models
1
Table of contents
Other Go-Go Babyz Stroller manuals