Godox SL100Bi User manual
Instruction Manual
705-SL10BY-00
Made in China
: 2
: 0755-29609320(8062) : 0755-25723423 : godox@godox.com
godox.com
Add: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao’an District,
Shenzhen, China Tel: +86-755-29609320(8062) Fax: +86-755-25723423 E-mail: [email protected]
GODOX Photo Equipment Co., Ltd.
LED
Bi-color LED Video Light
QCPASS
LEDSL100Bi2.4G
11LED
,(2800K~6500K)
0%~100%
11FX
APP2.4GLED
LCD
- 01 - - 02 -
1.
2.LED
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.DIM
15.CCT/FX
16.FX
17.GR
18.CH
19.
20.
21.
COB;COB
*1 *1 *1
*1 *1
- 03 - - 04 -
ID
/
LED
RC-A6
DIM
-/+
0%~100%
110
2.4G
SL100Bi LEDRC-A6
2.4G163299ID
()LED(CH),(GR)IDLED
CHCH
CH
DIM
-/+
1~32CH
GR:GR
GRDIM
-/+
0~9/A~FGR
IDCHGR
IDDIM
ID-
/+OFF/1~99
CHGRID
1. MAC
MAC
MAC
2. Godox Light
APP()
APP
3. 2
()APP
()APP
LED
CCT/FX
-/+
2800K~6500K100
500
FXFX
CCT/FX11FX
FX1FX2FX3FX4FX5FX6FX7FX8FX9FX10Fx11
FlashFlashFlashStormStormStormTV
123123
- 05 - - 06 -
LED
ID
100%(LUX)
1
CRI
TLCI
2.4G
SL100Bi
AC100V~240V(50/60HZ)
100W
32
16(0~9/ABCDEF)
OFF/1-99
2800K6500K
0%~100%
32100
96
97
-10°40°
/
11
APP/2.4G
30
30
120°
243*205*127mm
1.6kg()
1
LEDLED
:CMIITID:2020DP13510
*
- 07 - - 08 -
Foreword
Warning
Thank you for purchasing Godox product!
SL Series LED Video Light SL100Bi is suitable for live recording, video shooting,
and many other occasions with stable light resource, even illumination and
adjustable color temperature.
Features:
• Freely adjust color temperature from 2800K to 6500K
• With stable light source and adjustable light brightness from 0% to 100%
• With 11 Fx special effects mode to simulate various of shooting scenes
• Can be remote controlled by 2.4G and smartphone APP
• Bowens-mount support various of accessories
• Clear LCD display
• With excellent heat dissipation
Read and understand all instructions before using.
Close supervision is necessary when any appliance is used by or near children. Do
not leave appliance unattended while in use.
Care must be taken as burns can occur from touching hot parts.
Do not operate appliance with a damaged cord or if the appliance has been dropped
or damaged – until it has been examined by a qualified serviceman.
Position the cord so that it will not be tripped over, pulled, or contact hot surfaces.
If an extension cord is necessary, a cord with a current rating at least equal to that of
the appliance should be used. Cords rated for less amperage than the appliance
may overheat.
Always unplug appliance from electrical outlet before cleaning and servicing and
when not in use. Never yank cord to pull plug from outlet. Grasp plug and pull to
disconnect.
This appliance is not waterproof device. To reduce the risk of electric shock, do not
immerse this appliance in water or other liquids.
Do not disassemble. Should repairs become necessary, this appliance must be sent
to an authorized maintenance center.Incorrect maintenance behavior may cause
electric shock when the appliance is subsequently used.
When this appliance is working,please do not cover the Thermovent,and please do
not look directly at or touch the COB lamp beads under any circumstances.
Name of Body
● Light Head
When using your photographic equipment, basic safety precautions should
always be followed, including the following:
01.Light Body
02.LED Beads
03.Protect Cover
04.Bowens-mount
05.Accessory Locking
Ring
06.Reflector
07.Umbrella Input
08.Direction Adjust
09.Bracket
10.Thermovent
11.Air Inlet
12.Handle
13.Display
14.DIM Dial
15.CCT/FX Dial
16.FX Button
17.GR Button
18.CH Button
19.Bluetooth
20.Power On/Off
21.Power Jack
- 09 - - 10 -
LCD Panel
Channel
Group
Light Effects
ID
Power/Brightness
Color Temperature
What’s in the Box
Light Body *1
Reflector *1 Protection Cover *1
Power Cord *1 Instruction Manual *1
Optional Accessories
Power Source
Operation
The product can be used in combination with the following accessories sold
separately, so as to achieve best photography effects: RC-A6 Remote Control,
Power Inverter, Softbox, Photographic Umbrella, Light Stand, Honey Comb,
Beauty Dish, Snoot, etc.
Connect the LED light to power source with power cable. Then, press the
power switch to turn it on off.
Brightness Adjustment: turn the
DIM dial to adjust brightness
from 0% to 100%. Turn the CCT/FX
dial to decrease the value while
rightwards to increase.And
adjust 1 value in normal operation
while 10 values in quick operation.
- 11 - - 12 -
Bluetooth
With 2.4G wireless system, LED Video Light SL100Bi has receive and control function.
Up to 16 groups of LED lights can be controlled. 32 channels and 99 wireless IDs are
available with strong anti-interference capability. Please set the channels, groups and
IDs of LED light to the same as those of RC-A6 remote control (optional) before usage.
Display FX1 FX2 FX3 FX4 FX5 FX6 FX7 FX8 FX9 FX10 Fx11
Scene Flash Flash Flash Storm Storm Storm TV Broken Candle Fire Firework
123123
Light Effects Mode
Short press the FX button to enter or exit the special effects. When entering the FX
modes, FX icon will be displayed on the LCD panel. Then, turn the CCT/FX select dial
on the left to choose one mode from the 11 special effects modes to achieve creative
shooting.
Color Temperature Adjustment:
in LED continuous lighting mode,
turn the CCT/FX select dial to adjust
color temperature from 2800K to
6500K. Turn the select dial on the
left to decrease the value while
rightwards to increase.
Switch 100 unit values at normal
speed and 500 unit values at quick
speed.
2.4G Wireless Setting
Bluetooth Setting
CH Channel adjustment: short press
CH button and the CH values will be
blinking on the display. Turn the DIM
dial on the right to adjust channels
from 1 to 32. Turn the select dial
leftwards to decrease the value while
rightwards to increase. Press the
CH button again to confirm.
1. Bluetooth MAC code checking: short press the
Bluetooth button until Bluetooth MAC code is displayed.
Press the Bluetooth button again and the MAC code will
disappear. And the code will be displayed after returning
to the main interface.
2. Scan the QR code to download the “GodoxLight”
smartphone APP(can be used in Android and Apple).
For more smartphone APP operations, please open the
“help” in APP to gain detailed guidance.
3. Bluetooth reset function: long press the SET button for
2 seconds and the Bluetooth icon will blink because of
resetting. And the icon will stop blinking after being
successfully reset.
Note: The APP can be used directly on the firstly installed
device (smartphone or iPad). When change to other
mobile device (smartphone or iPad), the light shall be
reset before the normal connection of APP.
GR Group adjustment: short press GR
button and the GR values will be blinking
on the display. Turn the DIM dial on the
right to adjust groups from 0 to 9 and A
to F. Turn the select dial leftwards to
decrease the value while rightwards to
increase. Short press the GR Button
again to exit from GR setting.
ID Setting: long press the CH and GR
button together until the ID values is
blinking on the display. Turn the DIM dial
on the right to adjust IDs from OFF and 1
to 99. Turn the select dial leftwards to
decrease the value while rightwards to
increase. Then, long press CH and GR
button to exit from ID setting.
- 13 - - 14 -
Maintenance
• This product, except consumables e.g. battery, power cable and connect cable, is supported
with a one-year warranty.
• Avoid sudden impacts and the product should be dedusted regularly.
• Maintenance of the flash must be performed by our authorized maintenance department
which can provide original accessories.
• Unauthorized service will void the warranty.
• If the product had failures or was wetted, do not use it until it is repaired by professionals.
• Changes made to the specifications or designs may not be reflected in this manual.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
LED Light
Power Supply
Output Power
Channel
Group
ID
Color Temperature
Light Adjustment Range
100% Illuminance(LUX)
(with standard reflector,
testing distance, 1m)
CRI
TLCI
Temperature of Working Environment
Light Effect Mode
Control Method
Bluetooth Transmission Distance
2.4G Wireless Transmission Distance
Beam Angle
Dimension
Net Weight
BT Frequency Range
Max. Transmitting Power
SL100Bi
AC100V~240V(50/60HZ)
100W
32
16(0~9/A B C D E F)
OFF/1-99
2800K~6500K
0%~100%
Max. 32100
≥96
≥97
-10° - 40°
11
Smartphone APP/2.4G Wireless
≈30m
≈30m
120°
243*205*127mm
1.6kg (not include reflector)
2402.0-2480.0MHz
5dbm
Changes made to the specifications or designs may not be reflected in this manual.
Technical Data
Failures Reminder
lighting indicates fan failure, flashing indicates failure.
lighting indicates high temperature alarm, flashing indicates high temperature
protection status and light automatically enters the shutdown procedure.
- 15 - - 16 -
()
()
()
12
3
12
0755-29609320-8062
Warranty
Dear customers, as this warranty card is an important certificate to apply for our
maintenance service, please fill in the following form in coordination with the seller
and safe-keep it. Thank you!
Note: This form shall be sealed by the seller.
Applicable Products
The document applies to the products listed on the Product Maintenance lnformation
(see below for further information). Other products or accessories (e.g. promotional
items, giveaways and additional accessories attached, etc.) are not included in this
warranty scope.
Warranty Period
The warranty period of products and accessories isimplemented according to the
relevant Product Maintenancelnformation. The warranty period is calculated from the
day(purchase date) when the product is bought for the first time,And the purchase date
is considered as the date registered onthe warranty card when buying the product.
Product
Information
Model Product Code Number
Name Contact Number
Address
Customer
Information
Seller
Information
Note:
Name
Contact Number
Address
Date of Sale
If maintenance service is needed, you can directly contact the product distributor or
authorized service institutions. You can also contact the Godox after-sale service call
and we will offer you service. When applying for maintenance service, you should
provide valid card. If you cannot provide valid warranty card, we may offer you warranty
maintenance service once confirmed that the product or accessory is involved in the
maintenance scope, but that shall not be considered as our obligation.
The guarantee and service offered by this document are not applicable in the following
cases: . The product or accessory has expired its warranty period; . Breakage or
damage caused by inappropriate usage, maintenance or preservation, such as improper
packing, improper usage, improper plugging in/out external equipment, falling off or
squeezing by external force, contacting or exposing to the improper temperature,
solvent, acid, base, flooding and damp environments, etc; . Breakage or damage
caused by non-authorized institution or staff in the process of installation, maintenance,
alternation, addition and detachment; . The original identifying information of product
or accessory is modified, alternated, or removed; . No valid warranty card; .
Breakage or damage caused by using illegally authorized, nonstandard or non-public
released software; . Breakage or damage caused by force majeure or accident; .
Breakage or damage that could not be attributed to the product itself. Once met these
situations above, you should seek solutions from the related responsible parties and
Godox assumes no responsibility. The damage caused by parts, accessories and
software that beyond the warranty period or scope is not included in our maintenance
scope. The normal discoloration, abrasion and consumption are not the breakage within
the maintenance scope.
How to Get the Maintenance Service
Inapplicable Cases
Godox After-sale Service Call 0755-29609320-8062
Maintenance and Service Support Information
The warranty period and service types of products are implemented according to the
following Product Maintenance Information:
Product
Type
Parts
Other Items
Name
Circuit Board
Battery
Electrical parts e.g.battery
charger, power cord, sync cable,
etc.
Flash tube, modeling lamp, lamp
body, lamp cover, lockingdevice,
package, etc.
Maintenance
Period(month)
12
3
12
No
Warranty Service
Type
Customer sends
the product to
designated site
Without warranty
Customer sends
the product to
designated site
Customer sends
the product to
designated site
Other manuals for SL100Bi
1
Table of contents
Other Godox Camera Accessories manuals
Popular Camera Accessories manuals by other brands
Sony
Sony VAD-WB operating instructions
Gates Underwater Products
Gates Underwater Products PRO ACTION Setup, use and care guide
Bowens
Bowens RINGFLASH PRO user guide
Fantasea
Fantasea Nano Flash instruction manual
Broncolor
Broncolor Scoro S WiFi / RFS 2 operating instructions
Glidecam
Glidecam X-20 Set up and operation guide
