GoECOlife GMW81B User manual

GoECOlife GMW81B
8-Sheet Level 4
Micro-Cut Shredder
Instruction Manual

microcut shredder
LIMITED EDITION GMW81B
microcut
8
sheet capacity
3.6 gal. basket user manual

We are committed to delivering the best-in-class product
to you. Being environmentally responsible does not mean
one must sacrice performance, style or innovation.

EnvyGreen™features
carbon neutral
This product is carbon neutral. It meets Carbonfund.org’s
Carbon Free
® Product Certication protocol which requires
third-party life cycle assessment of the product’s carbon footprint,
and carbon reductions in support of third-party validated
renewable energy and reforestation projects. To learn more,
visit www.carbonfund.org.
energy-saving technology
GoECO™ Energy-Saving Technology virtually eliminates vampire
energy loss. This shredder only draws power during actual
shredding operation. No wasted electricity when in STANDBY mode.
EnvyGreen™features

installation
• Only operate this product from the type of power source indicated on the marking label. If
you are not sure of the type of power available, consult an electrician.
• Make sure the electrical outlet is easily accessible from the shredder.
• Shredder must be operated only in upright position.
• To make sure the shredder has proper ventilation, place it a minimum distance of 2 in.
(5 cm) from the wall or furniture.
safety instructions
1. Read and follow all instructions before use. Save these instructions for later use.
2. Always turn o and unplug the machine before moving, servicing, cleaning, or anything
other than normal operation. Serious injury may result. Clean shredder with a damp cloth,
using a mild soap and water solution.
3. Do not use abrasives or petroleum-based cleaners.
4. Place this product as close as possible to power source for quick and easy unplugging.
5. Turn o the power switch before removing waste bin. It is advisable to disconnect the
power cord before opening the shredder.
6. This product should never be placed near a radiator or other heat source.
7. Do not allow anything to rest on the power cord. Do not place the power cord where
people may walk on it.
8. If an extension cord is used with this product, make sure the total ampere (amps) ratings
on the products plugged into the extension cord do not exceed the extension cord’s
ampere rating.
9. Do not attempt to service this product yourself, as opening or removing covers may
expose you to risks of getting injured. Also, doing this will void the shredder’s warranty.
10. Unplug this product and contact technical support when:
• The power cord or plug is damaged or frayed.
• Liquid has been spilled on the product.
• The product has been exposed to rain.
• The product does not operate normally, even when the operating instructions are followed.
• The product has been dropped, or the casing has been damaged.
11. This shredder should be operated only with an operator in attendance.
12. Empty the waste bin regularly so that the waste output is not impeded.
13. This machine can shred normal paper and credit cards. However, you should shred only
one type of these items at a time to avoid causing an overload.
installation / safety instructions

WARNING
CAUTION: KEEP THIS DEVICE AWAY FROM CHILDREN AND PETS! Place the paper
shredder in an area less accessible to children.
DO NOT PLACE FINGERS TOO CLOSE TO THE FEED SLOT, AS SERIOUS INJURY MAY
OCCUR. Paper shredders can pull children’s ngers into the shredder mechanism.
AVOID GETTING LOOSE CLOTHING OR JEWELRY NEAR THE FEED SLOT.
AVOID GETTING HAIR NEAR THE FEED SLOT.
NEVER spray any aerosol-based products in or around the shredder.
NEVER dispose of ammable chemicals, or materials that have come into contact
with ammable chemicals (for example, nail polish, acetone, gasoline) in the shredder
basket. NEVER use any petroleum–based or ammable oils or lubricants in or around
the machine, as some oils can combust causing serious injury. Lubricants specically
designed for shredders are acceptable.
NEVER place the shredder near water or any heat source.
Avoid direct contact with water.
STOP USE IMMEDIATELY IF:
1. The shredder blades become jammed with paper.
2. The shredder motor makes loud and/or irregular noise during operation.
3. The shredder blades or paper guides become bent or compromised in any way.
Continuing to operate your shredder with any of the above conditions present could
be potentially dangerous.
! !
warning

shredder diagram
Paper Feed
Throat
Wastebasket
GoECO®
“ON” Switch
REVERSE
OFF
ON / POWER
CREDIT CARD
ON / POWER
OVERHEAT
shredder diagram

technical specications
model GMW81B
cutting style microcut
shred size 0.16” x 0.39” (4 x 10mm)
sheet capacity 8 sheets
shred speed max sheet capacity 6.5 ft/min (2.0 m/min)
intake throat width 8.66” (220mm)
dimensions (l x w x h) 14.3” x 7.7” x 14.9” (362 x 195 x 378mm)
weight 10.6 lbs (4.8 kg)
basket capacity 3.6 gallons (13.5 liters)
run time (min) 5 ON / 60 OFF
noise level (motor) 62 dB
technical specifications
8-sheet microcut shredder
LIMITED EDITION
how to use your shredder
Setup Instructions:
1. Mount the shredder correctly to the basket.
2. Connect the power cord to any standard 120 volt AC outlet. For pluggable equipment,
the socket-outlet shall be installed near the equipment and shall be easily accessible.
3. Move switch to ON position.
4. Insert paper to activate.
Setup Cautions:
1. All shredders have very sharp, exposed blades on the underside. Please use care when
mounting the shredder on to the wastebasket.
2. Make sure power cord is not damaged in any way and that the outlet is properly functioning.
3. It is normal for residual lubricant in the motor to burn o during the rst several
extended uses of your shredder. Should you notice a slight burning odor or the presence
of small wisps of smoke during the rst several extended uses, you may continue using
the shredder. If either symptom continues to occur after repeated use, please
contact technical support for assistance.
1
year
product warranty

helpful user tips
Clearing a Jam
If paper is not inserted properly into the shredder, or if the sheet capacity is exceeded,
a jam may result. Move the switch to the REVERSE (<<) position, and remove the excess
paper from the top and pull it out. TO PREVENT ANY INJURIES, DO NOT PLACE YOUR
HANDS NEAR THE FEED OPENING. Once the paper is cleared, normal shredding operation
can resume. If the shredder jams while in reverse, press the switch to the AUTO position
and let shredder run to clear the jammed paper. If jam does not clear, slide the switch back
and forth between the REV and AUTO until the jam is cleared. If the jam cannot be cleared
following this procedure, unplug the unit and carefully remove the jammed paper manually.
Overheating
If your shredder overheats, the unit will automatically shut o and all functions will cease
in order to protect the motor. Turn o and unplug the shredder from the outlet. Allow
enough time for the motor to cool down. The shredder will not resume normal function
until the temperature of the motor cools down to a safe temperature. Once cool, plug the
shredder back into the outlet, turn the unit back on and resume normal operation. Make
sure to empty waste basket to avoid overloading the basket and damaging the
cutting mechanism.
Bin Full Function
Some shredders are equipped with a mechanical or optical Bin Full sensor. When the
basket becomes full, the shredder will cease operation. Empty basket to resume operation.
Emptying Basket
Always turn the shredder o and unplug the power cord from the AC outlet before
cleaning it, moving it, or emptying the wastebasket. Always keep wastebasket emptied so
that the shredder’s output is not impeded. Never let the wastebasket get full. This will
lead to shredded material being pulled back up into the shredder and cause jams.
Staples and Paperclips
This shredder will safely shred standard staples and small paperclips. Industrial or non-
standard, large size staples, jumbo and/or buttery paperclips, and binder clips should
NEVER be shredded. Please remove from paper before shredding.
user tips

how to maintain your shredder
Lubricate Blades Regularly
• Only use lubricants specically designed for your shredder, such as shredder lubricant
or shredder lubricant sheets.
• NEVER use spray lubricants.
• Follow directions on the shredder lubricant product package.
• Do not touch the cutting surface.
• Continue to recycle waste paper in a normal manner.
When Using Shredder Lubricant Sheets
Never tear or open a shredder lubricant sheet. Please, empty waste basket prior to use.
Shred one shredder lubricant sheet by feeding sheet in the direction on the arrows,
directly into the paper feed entrance as per the instructions that came with your shredder.
After shredding the lubricant sheet completely, run the shredder in reverse for 10
seconds for optimal performance. Align the rst lubricant sheet to the left of the shredder
throat. The next time you use a shredder lubricant sheet align the pouch to the right of
the shredder throat. Continue to alternate between aligning the pouches to the left and
right to ensure the entire cutting mechanism remains well lubricated. Re-lubricate your
shredder by shredding a lubrication sheet after 30 minutes of shredding or a minimum of
twice per month to maintain maximum performance.
maintain your shredder

warranty / returns / registration
limited product warranty
The manufacturer warrants the machine for a limited time to be free from defects in material
and workmanship. If any part is found to be defective during the warranty period, your
sole and exclusive remedy will be repair or replacement, at the manufacturer’s option and
expense, of the defective part except for the shipping cost. It is the responsibility of the
consumer to pay the shipping costs to return the machine to the manufacturer.
This warranty is valid for the original consumer only with original proof of purchase
and is not transferable. This warranty does not apply in cases of abuse, mishandling or
unauthorized repair. ANY IMPLIED WARRANTY, INCLUDING THAT OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED IN DURATION TO THE
APPROPRIATE WARRANTY PERIOD SET FORTH ABOVE. In no event shall the manufacturer be
liable for any consequential or incidental damages attributable to this product. This warranty
gives you specic legal rights. You may have other legal rights that vary according to the laws
of each state.
For more details, or to obtain service under this warranty, please contact us
at 866-377-4771.
Please retain original proof of purchase to ensure that your product is recorded and warranty
information received.
return instructions
1. Before you return your shredder, call 866-377-4771 for a Return Authorization Number
(RA#), shipping instructions, and the manufacturer’s address.
2. Make a photocopy of the proof of purchase (store receipt), showing original purchase date,
and tape it securely to the shredder (DO NOT send the original receipt).
3. Pack the shredder in its original carton, or equivalent, and write the RA# clearly on the
outside of the box.
4. Ship the shredder to the address provided. Save your shipping receipt.
CALL US FOR AN RA# BEFORE RETURNING A DEFECTIVE PRODUCT.
product registration
Please register your new product at www.goecolife.com, or call 866-377-4771.
contact us
For more information, please call 866-377-4771, or email us at [e-mail].
IMPORTANT!