gofanco Prophecy PRO-HDExtIP-CTRL User manual

PRO-HDExtIP-CTRL
Control box for PRO-HDExtIP
®
Made in Taiwan
User‘s Guide

®
PRO-HDExtIP-CTRL
Congratulaons for owning a gofanco product. Our products
aim to meet all your connecvity needs wherever you go.
Have fun with our products!
Please read this manual carefully before rst use.
If you need more informaon about our products, please visit
www.gofanco.com.
For technical support, please email us at
[e-mail].
For drivers/manuals download, please go to
hp://www.gofanco.com/download.

®
PRO-HDExtIP-CTRL
3
2. Features
• Control center of the IP-based Transmitter and Receiver (PRO-
HDExtIP-TX & PRO-HDExtIP-RX)
• Monitors all devices in one central system
• Cost eective solution for IoT
• Intuitive and powerful user interface
• Includes Web interface and mobile support
• Easy installation with auto-detection of transmitter and recei-
ver units in the network.
• Drag-and-drop easy matrix switching
• Easy to create multiple video walls
• Schedule time for audio/video mapping, cycle-play and mute/
resume
1. Introduction
The PRO-HDExtIP-CTRL Smart Controller for HDMI over IP series
provides central management and real time monitoring over the IP
based PRO-HDExtIP transmitters and receivers. With high expanda-
bility, a single PRO-HDExtIP-CTRL can serve up to 1024 transmit-
ters and unlimited receivers at once. An intuitive web-based GUI
enables users to drag and drop any source to any display, build vi-
deo wall, create custom OSD, and schedule the operation for video
and power. Plus, PRO-HDExtIP-CTRL provides continuous system
monitoring, self-recovery along with real-time event notications
and alerts. Via cooperate network connection, users can remotely
access and activate the system from mobile devices.

®
PRO-HDExtIP-CTRL
4
3. Specications
Item Description
Technical
Role of usage Smart Controller
Input 1x RJ-45
Output 1x HDMI
HDMI connector Type A [19-pin female]
RJ-45 connector WE/SS 8P8C
Mechanical
Housing Metal enclosure
Dimensions
[L x D x H]
Model 90 x 78 x 29mm [3.5“ x 3“ x 1.1“]
Package 200 x 95 x 36mm [7.8" x 2.3" x 1.4']
Carton 500 x 417 x 222mm [1'6" x 1'4" x 8.7"]
Weight Model 222g [7.8oz]
Package 493g [1lbs]
Fixedness Rack-mount with ears
Power supply 5V DC
Power consumption 3.5 Watts [max]
Operation temperature 0~40°C [32~104°F]
Storage temperature -20~60°C [-4~140°F]
Relative humidity 20~90% RH [no condensation]
• Allows to create custom OSD
• Watch-dog with self-recovery
• Assigns the video sources for each display with account/pass-
word submit
• Supports video wall function

®
PRO-HDExtIP-CTRL
5
• 1x PRO-HDExtIP-CTRL
• 1x Rack-mounting ear set
• 1x DC 5V power supply
• 1x User Manual
4. Package Contents
5. Connection Diagram

®
PRO-HDExtIP-CTRL
6
1. Output: HDMI output, it displays the information of controller
2. RJ-45: Ethernet control port
3. USB: Reserved
4. Activity LED indicator: When the storage device is being used,
the light will blink
5. Power LED indicator: When unit connect a power supply unit,
the light will shine
6. +5V DC:+5V DC power jack
6. Panel Description
2
3
45
1
Front Panel Rear Panel
6

®
PRO-HDExtIP-CTRL
7
7. Operation Approach
1.
2.
3.
Installation Setup

®
PRO-HDExtIP-CTRL
8
Mapping
Video Wall
On this Page, you can see runtime status of all TX/RX device in
controller. The way to do input/output mapping is to drag TX
icon to RX icon. It also provides 10 prole spaces to save the
frequently used scenarios into the device. Clicking the prole
button to preview the saved scenarios.
It supports video wall function. User can click the button to
add the setting window of video wall. Click the button to do
more advanced setting. On the video wall setting page, you can
dene the layout, determine the OSD to turn on/o, and adjust
the bezel function. The method of setup the video wall is to drag
TX and RX to gray preview display area (see below example dia-
gram) and then click the save button. After saving, just go back
to Video Wall List and click button to enable the video wall.

®
PRO-HDExtIP-CTRL
9
Please note that, the TX /RXs selected into preview display
much be rectangle layout.
When you enable the video wall function, the corresponding
TX and RX will be locked in the Matrix page until disable it in
video wall page.
*
*

®
PRO-HDExtIP-CTRL
10
OSD
Controller provides 8 custom OSD windows for users to input the
texts or images to be shown with the video. User can click the
button to adjust the image, message text, transparency, posi-
tion, color and size. After setting, please drag the OSD window to
RX window which you want to show the desired text or image.

®
PRO-HDExtIP-CTRL
11
Schedule
Event
Access
User can schedule the operation for video and power. Just click
the button to setup the time, type and action.
User can set up the condition of trigger point in advance.
Event happens, then controller will take action for self-recovery,
real-time notication and alert.
Allow admin to assign video sources for each display, with
Account / Password submit.

®
PRO-HDExtIP-CTRL
1212
You can click the blink LED button to search corresponding
transmitter/receiver device.
*
After connecting the HDMI over IP transmitter and receiver units
to the Router/Ethernet Hub, the controller will automatically add
the device into the control system.
Setup

®
PRO-HDExtIP-CTRL
13
TX
RX
For more information and advanced setting, please go into here.

®
PRO-HDExtIP-CTRL
Log
This page contain a text log of your system operation history.

®
PRO-HDExtIP-CTRL
15
The product name and brand name may be registered trademarks of related manufacturers. TM and ®
may be omied on the user‘s guide. The pictures on the user‘s guide are just for reference, and there
may be some slight dierences with the actual products.
We reserve the rights to make changes without prior noce to a product or system described herein to
improve reliability, funcon, or design.
Disclaimer

Thank you for choosing gofanco
®
www.gofanco.com
Jun, 2019 Ver. A Copyright © by gofanco, LLC. All rights reserved.