Goldair FBB360 User manual

850WBenchBlender
Items: FBB360, FBB360R
Operating Instructions

Thank you for choosing this GOLDAIR Blender. This GOLDAIR
appliance has been designed and manufactured to high standards
of engineering and with proper use and care, as described in this
leaflet, will give you years of useful service. Please read these
instructions carefully and keep them for future reference.
ALWAYS
✔Always ensure hands are dry before
handling the plug or the Blender.
✔Always operate the Blender in the middle of
a secure, dry, level surface.
✔Always allow the Blender to cool before
cleaning and storing and before removing
and/or cleaning its components.
✔Carry out regular checks of the supply cord
to ensure no damage is evident.
✔Return the Blender after a malfunction, or if
it has been damaged in any manner, to an
authorised electrical service technician for
examination, repair or adjustment as special
purpose tools are required.
✔Children should be supervised to ensure
that they do not play with the appliance.
✔Before washing Blender jug, remove it from
the Blender.
✔Unplug from outlet while not in use and
before cleaning.
✔Switch off the appliance and disconnect
from supply before changing accessories or
approaching parts that move in use.
✔Avoid contact with the moving parts. Keep
hands, hair, clothing, as well as spatulas and
other utensils away from blades of the Blender
during operation to reduce the risk of injury to
person and/or damage to the Blender.
✔Prior to initial use, wash all the parts that
come into contact with food.
✔Take care when handling the Blender
blades; they are very sharp.
NEVER
✘Never use this appliance outdoors.
✘Never use this appliance for any purpose
other than its intended use. This appliance is
intended for household use only or in similar
applications such as:
•Staff kitchen areas in shops, offices and
other working environments;
•Farm houses
•By clients in hotels, motels and other
residential type environments;
•Bed and breakfast type environments
✘Never leave the appliance unattended when
in use.
✘Never allow the power cord to overhang the
edge of a table or bench top or to touch any hot
surface.
✘This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities or lack
of experience and knowledge, unless they are
supervised or have been given instruction
concerning the use of the Blender by a person
responsible for their safety.
✘Never place this appliance on or near a hot
gas or electric burner or where it could touch a
heated oven or microwave oven. Do not place
in a hot oven.
✘Never immerse the Blender’s power
housing, the cord set or plug in water or any
other liquid to protect against electrical
hazards.
✘Never place the Blender in a dishwasher.
✘Never use harsh, abrasive or caustic
cleaners to clean this appliance.
CARE AND SAFETY CONTINUED
OVERLEAF
General care and safety guide
TECHNICAL SPECIFICATION
Item No: FBB360, FBB360R
Power Supply: 220 - 240V, 50Hz
Power: 850W

General care and safety guide, continued
✘Never operate the appliance with a
damaged cord or plug, after it malfunctions, or
if it has been damaged in any manner. Have
the appliance checked and repaired by a
qualified electrician if repair is necessary. If the
supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
✘The Blender is not intended to be operated
by means of an external timer or separate
remote-control system. The use of an
extension cord is not recommended.
✘Never use metal scouring pads for cleaning.
Small metal pieces can come loose and cause
short-circuiting of electrical components, which
can cause electric shock or damage the
appliance.
✘Due to the risk of injury, the use of third
party accessories is not recommended by the
manufacturer.
✘Never blend hot oil or fat.
✘Never touch blades while the machine is
plugged in.
✘Never insert objects into the blender jug
while the machine is plugged in.
✘Do not allow children to use the blender
without supervision.
Before first use
Carefully unpack the Blender and remove all
packaging material.
Clean the various Blender accessories in warm
soapy water. Rinse and dry thoroughly before
use.
Before first use
Cleaning
To avoid risk of electric shock, before cleaning,
you MUST ALWAYS switch off and unplug the
cord from the electrical outlet.
Wipe Blender body with a damp cloth and dry
well. DO NOT immerse Blender body in water or
any other liquid.
Wash blender jug in hot soapy water. Rinse well
and dry. Be very careful with the sharp blades.
Alternatively, partially fill Blender jug with warm
water and a little dishwashing liquid. Run the
Blender for a short period to clean the jug.
Rinse and dry well.
The jug base can be removed, and the Blender
blades removed, by unscrewing the base of the
jug. Take care as the blades are very sharp.
Ensure you reassemble the jug completely.

Components
A. Jug lid
B. Measuring cap
C. Glass jug
D. Blades
E. Jug holder
F. Housing
G. Dial
Tips for use
When mixing hot liquids/foods excess pressure
may build up inside the blender. This can cause
the lid to come off and the contents to splash
out. We recommend that you avoid mixing
excessively hot foods and that you put only very
small quantities of hot liquids or foods into the
blender.
Do not use the blender for very hard food
products, such as bones, shelled nuts, frozen
meats etc., which could either damage the
blade or cause the motor to seize.
Do not use the Blender continuously for more
than 2 minutes.

Operating your Blender
1. Before first use, clean the measuring cup,
cover and jug.
2. Fit the blender glass jar onto the main
body, and turn it slightly in a clockwise
direction so it locks into the jug holder on
top of the housing.
3. Place items to be blended into the jug.
Ensure the contents will not overflow from
the jug. Maximum liquid capacity is1.5L.
DO NOT USE THE BLENDER WITHOUT
INGREDIENTS IN THE JUG.
4. Put the lid on top of the jug and push it
down. Insert the measuring cap into the
cover and turn till it locks into place.
5. Turn the dial to position 0 in order to make
sure the unit is turned off.
6. Plug the blender into the wall socket and
turn on.
7. This unit has a safety mechanism and
does not work if the jug is not installed
properly seated on housing.
8. Turn the dial to required speed
•0 = off
•P = pulse –suitable for ice
crushing
•1 = low
•2 = high
9. While the blender is working, a blue light
will show around the dial.
10. Turn the dial back to ‘0’ when finished
blending.
SUPPORT AND TECHNICAL ADVICE
PO Box 100707, NSMC, Auckland
Monday –Friday 8am-5pm
Phone: [phone]
Website: www.goldair.co.nz
Recipes
Orange Berry Smoothie
2 navel oranges, peel and pith removed, cut into
chunks
1 cup frozen blueberries
1 cup frozen raspberries
Combine all ingredients in blender; blend until
smooth.
Carrot and Mango Smoothie
1 ripe mango, chopped (or 1 1/2 cups frozen
mango chunks)
1 cup fresh carrot juice
Nutmeg
1/2 cup crushed ice (crush ice in a plastic bag
with a rolling pin)
Leave out ice if using frozen mango
Combine all ingredients in blender; blend until
smooth
Pomegranate and Berry Smoothie
2 cups mixed frozen berries
1 cup unsweetened pomegranate juice
1 cup water
Combine all ingredients in blender; blend until
smooth.
Fruit and Yoghurt Smoothie
1 1/2 cups plain non-fat or low-fat yogurt
1/2 medium chopped peeled pear
Small sliced banana
1 Tablespoon protein powder
3/4 cup crushed ice (crush ice in a plastic bag
with a rolling pin)
Combine all ingredients in blender; blend until
smooth

Your Goldair product has been inspected and
tested and is guaranteed subject to the
following for a period to two years from the
date of purchase against defects in
workmanship and materials. During this
period, such defects will be rectified by repair
or replacement of the product purchased.
Your product contains no user serviceable
components and this warranty becomes
invalid if in our opinion the product has been
misused, abused, incorrectly installed,
tampered with, connected to an electrical
supply not corresponding with the name plate
specification, or subjected to power surges.
The warranty does not include any labour or
other associated expense that may be
involved in removal or installation of the
product. Normal wear and tear is expressly
excluded.
If your Goldair product fails to operate
satisfactorily, please return it to the retailer
from whom it was purchased. To obtain a
repair or replacement product under this
warranty, you will need to produce satisfactory
evidence of date of purchase. The completed
warranty and purchase receipt must be
presented with the product. The warranty
should be filled out at the time of purchase. It
is in your interest to make sure this is done.
If the product is to be replaced (cannot be
repaired) then that replacement will be of the
same or similar product or accessory
excluding packaging, instruction card etc.
Where a replacement product is supplied, this
shall be guaranteed for the balance of the
original warranty period.
Any model that is no longer available will be
replaced by a model of a value and with such
features as we consider appropriate in the
circumstances. Goldair Ltd is not responsible
for freight forwarding charges, losses or
damage in transit.
If service is required after the warranty period
has expired, the product should be returned to
a qualified electrical technician. Service
outside of the warranty period will be at your
cost.
Consumers Guarantee Act (1993).
In accordance with the above act consumers
are advised that: The manufacturer does not
undertake that repair facilities and parts are
necessarily available for this product.
If any of the provisions of the foregoing are
contrary to any relevant legislation, then that
provision shall be deemed to be excluded from
the warranty and the rest of the provisions will
continue to apply.
Name ………………………………………………
Address ……………………………………………
……………………………………………………….
Suburb ……………………………………………
Purchased from …………………………………
Date of purchase …………………………………
Name of product …………………………………
Model no ……………………………………………
IMPORTANT: Please retain this warranty card
Two year warranty