Goldair GSB380 User manual

200WStickBlenderSet
Models: GSB380
Operating Instructions

Thank you for choosing this GOLDAIR Stick Blender. This
GOLDAIR appliance has been designed and manufactured to high
standards of engineering and with proper use and care, as
described in this leaflet, will give you years of useful service.
Please read these instructions carefully and keep them for future
reference.
ALWAYS
✔Always ensure hands are dry before
handling the plug or the Stick Blender.
✔Always operate the Stick Blender in the
middle of a secure, dry, level surface.
✔Always allow the Stick Blender to cool
before cleaning and storing and before
removing and/or cleaning its components.
✔Carry out regular checks of the supply cord
to ensure no damage is evident.
✔Return the Stick Blender after a malfunction,
or if it has been damaged in any manner, to an
authorised electrical service technician for
examination, repair or adjustment as special
purpose tools are required.
✔Children should be supervised to ensure
that they do not play with the appliance.
✔Before washing blender rod, remove it from
the Stick Blender.
✔Unplug from outlet while not in use and
before cleaning.
✔Switch off the appliance and disconnect
from supply before changing accessories or
approaching parts that move in use.
✔Avoid contact with the moving parts. Keep
hands, hair, clothing, as well as spatulas and
other utensils away from blade of the blender
during operation to reduce the risk of injury to
person and/or damage to the Stick Blender.
✔Take special care when preparing food for
babies, the elderly and infirm. Always ensure
that the Stick Blender shaft is thoroughly
sterilized. Use a sterilizing solution in
accordance with the sterilizing solution
manufacturer’s instructions.
NEVER
✘Never use this appliance outdoors.
✘Never use this appliance for any purpose
other than its intended use. This appliance is
intended for household use only or in similar
applications such as:
•Staff kitchen areas in shops, offices and
other working environments;
•Farm houses
•By clients in hotels, motels and other
residential type environments;
•Bed and breakfast type environments
✘Never leave the appliance unattended when
in use.
✘Never allow the power cord to overhang the
edge of a table or bench top or to touch any hot
surface.
✘This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities or lack
of experience and knowledge, unless they are
supervised or have been given instruction
concerning the use of the Stick Blender by a
person responsible for their safety.
✘Never place this appliance on or near a hot
gas or electric burner or where it could touch a
heated oven or microwave oven. Do not place
in a hot oven.
✘Never immerse the Stick Blender’s power
housing, the cord set or plug in water or any
other liquid to protect against electrical
hazards.
✘Never place the Stick Blender in a
dishwasher.
✘Never use harsh, abrasive or caustic
cleaners to clean this appliance.
CARE AND SAFETY CONTINUED
OVERLEAF
General care and safety guide
TECHNICAL SPECIFICATION
Model No: GSB380
Power Supply: 220 - 240V, 50Hz
Power: 200W

General care and safety guide, continued
✘Never operate the appliance with a
damaged cord or plug, after it malfunctions, or
if it has been damaged in any manner. Have
the appliance checked and repaired by a
qualified electrician if repair is necessary. If the
supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
✘The Stick Blender is not intended to be
operated by means of an external timer or
separate remote-control system. The use of an
extension cord is not recommended.
✘Never use metal scouring pads for cleaning.
Small metal pieces can come loose and cause
short-circuiting of electrical components, which
can cause electric shock or damage the
appliance.
✘Due to the risk of injury, the use of third
party accessories is not recommended by the
manufacturer.
✘Never blend hot oil or fat.
✘Never touch blades while the machine is
plugged in.
✘Do not allow children to use the blender
without supervision.

Components
A. Speed buttons
D. Stick Blender blades
C. Stick Blender rod
B. Power handle
E. Chopper cover
G. Bowl
F. Chopper blade
I. Whisk
H. Whisk collar
J. Tool tidy
Before first use
Before first use
Carefully unpack the Stick Blender and
remove all packaging material, including
blade covers.
Clean the various Stick Blender
accessories in warm soapy water. Rinse
and dry thoroughly before use.

Assembly
Cleaning
To avoid risk of electric shock, before
cleaning, you MUST ALWAYS switch off
and unplug the cord from the electrical
outlet.
Wash blending rod in hot soapy water.
Rinse well and dry. Be very careful with the
sharp blades.
Wipe Stick Blender body with a damp cloth
and dry well.
Some foods e.g. carrot may discolour the
plastic; wiping with a cloth dipped in
vegetable oil helps remove discolouring.
Assembly of
Stick Blender
Assembly of
Whisk
Assembly of
Chopper
Assembly of
Tool Tidy

Operating your Stick Blender Set
FOR SAUCE PAN BLENDING:
1. Take the pan off the heat and let it
cool slightly, Otherwise your hand
blender could overheat
2. Fit the power handle inside the
blender shaft, turn and lock.
3. Plug in.
4. To avoid splashing, place the blades
into the food before switching on.
5. Don’t let the liquid get above the join
between the power handle and
blender shaft.
6. Move the blade through the food and
use a stabbing action.
7. If your blender gets blocked, unplug
before cleaning.
8. After use, unplug, dismantle and clean
according to directions.
CAUTION:
Do not operate the Stick Blender
continuously for too long. With heavy
mixtures, don’t use your Stick Blender
for more than 50 seconds in any four
minute period as it will overheat.
NEVER immerse the motor housing in
water.
Be sure the unit is turned off and cord
is unplugged from electrical outlet
before removing the attachments from
housing.
FOR WHISK:
1. Whisk is suitable for light ingredients
such as egg whites, cream, instant
desserts and for whisking eggs and
sugar for baking.
2. Whisk is not suitable for creaming
butter or margarine and sugar.
3. DO NOT whisk more than 4 egg
whites or 400ml cream.
4. Push wire whisk into whisk collar.
5. Fit power handle into whisk collar, turn
and lock
6. Place food into a bowl.
7. Plug in. To avoid splashing, start on
Speed 1 Move whisk clockwise.
8. DO NOT allow liquid to rise above
whisk wires.
9. After use, switch off, unplug and
dismantle. Clean according to
directions.

Operating your Stick Blender Set
SUPPORT AND TECHNICAL ADVICE
PO Box 100707, NSMC, Auckland
Monday –Friday 8am-5pm
Phone: [phone]
Website: www.goldair.co.nz
FOR CHOPPER UNIT:
1. Do not touch the sharp blades.
2. Remove chopper blade before
emptying bowl.
3. Do not remove the cover until blade
has completely stopped moving.
4. Use chopper unit for chopping foods
such as meat, cheese, vegetables,
herbs, bread, biscuits, nuts.
5. DO NOT use chopper for hard items
such as ice, coffee beans, spices,
chocolate as this may damage the
blade.
6. Remove bones from meat before
chopping.
7. Chop any food into 1-2cm cubes.
8. Fit chopper blade over pin in chopper
bowl.
9. Add food.
10. Fit chopper cover, turn and lock.
11. Fit power handle, turn and lock.
12. Plug in, hold bowl steady then press
Speed 2.
13. After use, unplug and dismantle.
Clean according to directions.
PROCESSING GUIDE:
MAXIMUM AMOUNT APPROX TIME (SECS)
MEAT 300g 10-30
HERBS 20g 20
NUTS 200g 30
CHEESE 150g 30
BREAD 1 slice 20
HARDBOILED EGGS 2 5
ONIONS 100g 10
TOOL TIDY:
1. Fit Tool Tidy to Chopper Cover, lining
up tab first.
2. Fit Power Handle on top and turn.
3. Store Rod and Whisk on Tool Tidy by
lowering and turning

Your Goldair product has been inspected and
tested and is guaranteed subject to the
following for a period to two years from the
date of purchase against defects in
workmanship and materials. During this
period, such defects will be rectified by repair
or replacement of the product purchased.
Your product contains no user serviceable
components and this warranty becomes
invalid if in our opinion the product has been
misused, abused, incorrectly installed,
tampered with, connected to an electrical
supply not corresponding with the name plate
specification, or subjected to power surges.
The warranty does not include any labour or
other associated expense that may be
involved in removal or installation of the
product. Normal wear and tear is expressly
excluded.
If your Goldair product fails to operate
satisfactorily, please return it to the retailer
from whom it was purchased. To obtain a
repair or replacement product under this
warranty, you will need to produce satisfactory
evidence of date of purchase. The completed
warranty and purchase receipt must be
presented with the product. The warranty
should be filled out at the time of purchase. It
is in your interest to make sure this is done.
If the product is to be replaced (cannot be
repaired) then that replacement will be of the
same or similar product or accessory
excluding packaging, instruction card etc.
Where a replacement product is supplied, this
shall be guaranteed for the balance of the
original warranty period.
Any model that is no longer available will be
replaced by a model of a value and with such
features as we consider appropriate in the
circumstances. Goldair Ltd is not responsible
for freight forwarding charges, losses or
damage in transit.
If service is required after the warranty period
has expired, the product should be returned to
a qualified electrical technician. Service
outside of the warranty period will be at your
cost.
Consumers Guarantee Act (1993).
In accordance with the above act consumers
are advised that: The manufacturer does not
undertake that repair facilities and parts are
necessarily available for this product.
If any of the provisions of the foregoing are
contrary to any relevant legislation, then that
provision shall be deemed to be excluded from
the warranty and the rest of the provisions will
continue to apply.
Name ………………………………………………
Address ……………………………………………
……………………………………………………….
Suburb ……………………………………………
Purchased from …………………………………
Date of purchase …………………………………
Name of product …………………………………
Model no ……………………………………………
IMPORTANT: Please retain this warranty card
Two year warranty