Goldair FK350 User manual

1.7LDecorKettle
Models: FK350, FK350R, FK350C, FK350B
Operating Instructions

Thank you for choosing a Goldair Electric Kettle. This Goldair
appliance has been designed and manufactured to high standards
of engineering and with proper use and care, as described in this
leaflet, will give you years of useful service. Please read these
instructions carefully.
ALWAYS
✔Always ensure hands are dry before
handling the plug or the Kettle.
✔Always operate the Kettle on a secure, dry,
level surface.
✔Always use the Kettle only with the stand
provided.
✔Always allow adequate air space above and
on all sides for air circulation. Do not allow the
Kettle to touch curtains, wall coverings,
clothing, dishtowels or other flammable
materials during use. Do not use under
cupboards or curtains.
✔Always be sure to unplug from the socket
when not in use and before cleaning.
✔Always allow the Kettle to cool before
cleaning and storing.
✔Carry out regular checks of the supply cord
to ensure no damage is evident.
✔Return the Kettle after a malfunction, or if it
has been damaged in any manner to an
authorised electrical service technician for
examination, repair or adjustment as special
purpose tools are required.
NEVER
✘Never touch hot surfaces.
✘Never use this appliance outdoors.
✘Never use this appliance for any purpose
other than its intended use. This appliance is
intended for use in household and similar
applications such as staff kitchen areas in
shops, offices and other working
environments; farm houses, by clients in
hotels, motels and other residential type
environments, bed and breakfast type
environments..
✘Never operate this Kettle on an inclined
plane.
✘Never operate this Kettle unless the
element is fully immersed.
✘Never move this Kettle while it is switched
on.
✘This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities or lack
of experience and knowledge, unless they are
supervised or have been given instruction
concerning the use of the Kettle by a person
responsible for their safety.
✘Close supervision is necessary when the
appliance is near children.
✘Never leave the appliance unattended when
in use.
✘Never place this appliance on or near a hot
gas or electric burner or where it could touch a
heated oven or microwave oven.
✘Never immerse any part of the Kettle, or
cord set and plug in water or any other liquid to
protect against electrical hazards.
✘Never use harsh, abrasive or caustic
cleaners to clean this appliance.
✘Never operate the appliance with a
damaged cord or plug, after it malfunctions, or
if it has been damaged in any manner.
✘The Kettle is not intended to be operated by
means of an external timer or separate
remote-control system.
CAUTION:
THE KETTLE GENERATES HEAT AND STEAM DURING USE. PROPER
PRECAUTIONS MUST BE TAKEN TO PREVENT THE RISK OF BURNS,
SCALDS, FIRES OR OTHER DAMAGE TO PERSONS.
General care and safety guide
TECHNICAL SPECIFICATION
Model No: FK350, FK350R, FK350B, FK350C
Power Supply: 220-240V, 50Hz AC only
Power: 1850 –2200W

Components
First use of kettle
1. Spout
2. Base station
3. Lid
4. Unlocking for lid
5. Handle
6. Water level
7. On/Off switch with indicator light
8. Power cord with plug
.
Before using for the first time, boil fresh water at least twice in the appliance to
remove any manufacturing residues. Use only water without any additives or
ingredients
CAUTION:
TOO LITTLE WATER MAY DAMAGE THE HEATING ELEMENT AND TOO MUCH
WATER MAY CAUSE WATER TO SPLATTER FROM THE KETTLE.

SUPPORT AND TECHNICAL ADVICE
North Shore City, Auckland, New Zealand
Monday –Friday 8am-5pm
Phone: [phone]
Website: www.goldair.co.nz
Operating your kettle
Please read these operating instructions
carefully and keep them in a safe place.
1. Place the machine on a flat surface.
2. Open the kettle by pressing the
unlocking button on the handle. Then fill in
some water. The water level can be read
using the water level indicator on the
kettle. Please do not overfill the kettle.
3. Close the lid by releasing the unlocking
button on the handle.
4. Place the kettle flush on the base.
Care and cleaning
1. Do not attempt to dismantle the kettle
or power base. There are no user
serviceable parts. For service or
repair, contact an authorised
electrician.
2. To prolong the kettle’s life, please
clean the mineral deposits in the
kettle regularly.
3. Always unplug from the plug socket
and allow to cool down before
cleaning.
4. Do not immerse the power cord,
kettle or power base in water.
5. Do not use chemicals, steel wool, or
abrasive cleaners to clean the outside
of the kettle as these will scratch the
surface and fade the outside color.
6. Periodical de-scaling is required. The
interval of de-scaling depends on the
hardness of water in your area and
the frequency of using the kettle.
Cleaning Method:
1. Fill the kettle with 0.5lt of white
vinegar and the remainder with water
and allow to stand for at least one
hour.
2. Empty the solution from the kettle.
Wipe the remaining deposits with a
damp cloth.
3. Fill the kettle with clean water, bring
to boil and then discard the water.
Repeat at least once or until no
mineral deposits are left and the
kettle will be ready to use.
4. Remove the scale filter. Wash with
clean water and dry thoroughly before
replacing in the kettle.

Your Goldair product has been inspected and
tested and is guaranteed subject to the
following for a period to two years from the
date of purchase against defects in
workmanship and materials. During this
period, such defects will be rectified by repair
or replacement of the product purchased.
Your product contains no user serviceable
components and this warranty becomes
invalid if in our opinion the product has been
misused, abused, incorrectly installed,
tampered with, connected to an electrical
supply not corresponding with the name plate
specification, or subjected to power surges.
The warranty does not include any labour or
other associated expense that may be
involved in removal or installation of the
product. Normal wear and tear is expressly
excluded.
If your Goldair product fails to operate
satisfactorily, please return it to the retailer
from whom it was purchased. To obtain a
repair or replacement product under this
warranty, you will need to produce satisfactory
evidence of date of purchase. The completed
warranty and purchase receipt must be
presented with the product. The warranty
should be filled out at the time of purchase. It
is in your interest to make sure this is done.
If the product is to be replaced (cannot be
repaired) then that replacement will be of the
same or similar product or accessory
excluding packaging, instruction card etc.
Where a replacement product is supplied, this
shall be guaranteed for the balance of the
original warranty period.
Any model that is no longer available will be
replaced by a model of a value and with such
features as we consider appropriate in the
circumstances. Goldair Ltd is not responsible
for freight forwarding charges, losses or
damage in transit.
If service is required after the warranty period
has expired, the product should be returned to
a qualified electrical technician. Service
outside of the warranty period will be at your
cost.
Consumers Guarantee Act (1993).
In accordance with the above act consumers
are advised that: The manufacturer does not
undertake that repair facilities and parts are
necessarily available for this product.
If any of the provisions of the foregoing are
contrary to any relevant legislation, then that
provision shall be deemed to be excluded from
the warranty and the rest of the provisions will
continue to apply.
Name ………………………………………………
Address ……………………………………………
……………………………………………………….
Suburb ……………………………………………
Purchased from …………………………………
Date of purchase …………………………………
Name of product …………………………………
Model no ……………………………………………
IMPORTANT: Please retain this warranty card
Two year warranty