Goldair FK360B User manual

1.7LKettle
Item: FK360B, FK360R, FK360W
Operating Instructions

Thank you for choosing a Goldair Electric Kettle. This Goldair appliance
has been designed and manufactured to high standards of engineering
and with proper use and care, as described in this leaflet, will give you
years of useful service. Please read these instructions carefully.
ALWAYS
✔Always ensure hands are dry before
handling the plug or the Kettle.
✔Always operate the Kettle on a secure,
dry, level surface.
✔Always use the Kettle only with the stand
provided.
✔Always allow adequate air space above
and on all sides for air circulation. Do not
allow the Kettle to touch curtains, wall
coverings, clothing, dishtowels or other
flammable materials during use. Do not use
under cupboards or curtains.
✔Always be sure to unplug from the socket
when not in use and before cleaning.
✔Always allow the Kettle to cool before
cleaning and storing.
✔Carry out regular checks of the supply
cord to ensure no damage is evident.
✔Return the Kettle after a malfunction, or if
it has been damaged in any manner to an
authorised electrical service technician for
examination, repair or adjustment as special
purpose tools are required.
NEVER
✘Never touch hot surfaces.
✘Never use this appliance outdoors.
✘Never use this appliance for any purpose
other than its intended use. This appliance is
intended for use in household and similar
applications such as staff kitchen areas in
shops, offices and other working
environments; farm houses, by clients in
hotels, motels and other residential type
environments, bed and breakfast type
environments.
CAUTION:
THE KETTLE GENERATES HEAT AND
STEAM DURING USE. PROPER
PRECAUTIONS MUST BE TAKEN TO
PREVENT THE RISK OF BURNS,
SCALDS, FIRES OR OTHER DAMAGE
TO PERSONS.
General care and safety guide
TECHNICAL SPECIFICATION
Item: FK360B, FK360R, FK360W
Power Supply: 220-240V ~ 50Hz AC
Power: 1850 –2200W
✘Never operate this Kettle on an inclined
plane.
✘Never operate this Kettle unless the
element is fully immersed.
✘Never move this Kettle while it is switched
on.
✘This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities or
lack of experience and knowledge, unless
they are supervised or have been given
instruction concerning the use of the Kettle
by a person responsible for their safety.
✘Close supervision is necessary when the
appliance is near children.
✘Never leave the appliance unattended
when in use.
✘Never place this appliance on or near a
hot gas or electric burner or where it could
touch a heated oven or microwave oven.
✘Never immerse any part of the Kettle, or
cord set and plug in water or any other liquid
to protect against electrical hazards.
✘Never use harsh, abrasive or caustic
cleaners to clean this appliance.
✘Never operate the appliance with a
damaged cord or plug, after it malfunctions,
or if it has been damaged in any manner.
✘The Kettle is not intended to be operated
by means of an external timer or separate
remote-control system.
CAUTION:
IF THE KETTLE IS OVERFILLED,
BOILING WATER MAYBE EJECTED

1. Lid handle
2. Lid
3. Spout (with removable filter)
4. Handle
5. Water window
6. Housing/body
7. Illuminated on / off switch
8. 360°swivel base
FEATURES
Automatic cut out boil-dry protection
Concealed element
360°swivel power base.
Removable, washable limescale filter
First use of Kettle
For first time use it is recommended that you
fill the kettle to the maximum level mark with
fresh tap water, then boil, empty and re-boil
the kettle at least two times to clear the
kettle of any dust or materials from the
manufacturing process. Do not drink this
water.
CAUTION:
TOO LITTLE WATER MAY DAMAGE THE
HEATING ELEMENT AND OVERFILLING
MAY CAUSE BOILING WATER TO BE
EJECTED.
Components
1
2
3 4
5
6
7
8

1. Do not attempt to dismantle the kettle or
power base. There are no user
serviceable parts. For service or repair,
contact an authorised electrician.
2. To prolong the kettle’s life, please clean
the mineral deposits in the kettle regularly.
3. Always unplug from the plug socket and
allow to cool down before cleaning.
4. Do not immerse the power cord, kettle or
power base in water.
5. Do not use chemicals, steel wool, or
abrasive cleaners to clean the outside of
the kettle as these will scratch the surface
and fade the outside color.
6. Periodic de-scaling is required. The
interval of de-scaling depends on the
hardness of water in your area and the
frequency of using the kettle.
Cleaning/Descaling Method:
1. Fill the kettle with 0.5L of white vinegar
and the remainder with water and allow to
stand for at least one hour.
2. Empty the solution from the kettle. Wipe
the remaining deposits with a damp cloth.
3. Fill the kettle with clean water, bring to boil
and then discard the water. Repeat at
least once or until no mineral deposits are
left and the kettle will be ready to use.
4. Remove the scale filter. Wash with clean
water and dry thoroughly before replacing
in the kettle.
1. Remove the kettle from the base to fill it.
Pull the lid up to remove lid from the kettle.
Pour water into the kettle to the desired
level (no less than MINIMUM and no more
than MAXIMUM), place the lid back on the
kettle and place the kettle back on the
base unit.
2. Connect the plug into a power outlet, turn
the kettle on by pressing the switch.
Ensure the kettle is positioned so the spout
is facing away from you
3. The kettle will automatically switch itself off
once the water has boiled and the red
power light goes off.
4. Lift the kettle from the base and pour the
water into a container or cup
5. The boiling process can be terminated at
any time by lifting the kettle off the power
base.
WARNING: DO NOT REMOVE THE LID
WHILE THE WATER IS BOILING
USE ONLY THE STAND PROVIDED WITH
THIS APPLIANCE
CAUTION: DO NOT OPERATE THE KETTLE
ON AN INCLINED PLANE
DO NOT MOVE THE KETTLE WHILE IT IS
SWITCHED ON
CAUTION: ENSURE THAT THE KETTLE IS
SWITCHED OFF BEFORE REMOVING IT
FROM ITS STAND
SUPPORT AND TECHNICAL ADVICE
PO Box 100707, NSMC, Auckland
Monday –Friday 8am-5pm
Phone: [phone]
Website: www.goldair.co.nz
Operating your Kettle
Care and cleaning

Your Goldair product has been inspected and
tested and is guaranteed subject to the
following for a period to two years from the
date of purchase against defects in
workmanship and materials. During this
period, such defects will be rectified by repair
or replacement of the product purchased.
Your product contains no user serviceable
components and this warranty becomes
invalid if in our opinion the product has been
misused, abused, incorrectly installed,
tampered with, connected to an electrical
supply not corresponding with the name plate
specification, or subjected to power surges.
The warranty does not include any labour or
other associated expense that may be
involved in removal or installation of the
product. Normal wear and tear is expressly
excluded.
If your Goldair product fails to operate
satisfactorily, please return it to the retailer
from whom it was purchased. To obtain a
repair or replacement product under this
warranty, you will need to produce satisfactory
evidence of date of purchase. The completed
warranty and purchase receipt must be
presented with the product. The warranty
should be filled out at the time of purchase. It
is in your interest to make sure this is done.
If the product is to be replaced (cannot be
repaired) then that replacement will be of the
same or similar product or accessory
excluding packaging, instruction card etc.
Where a replacement product is supplied, this
shall be guaranteed for the balance of the
original warranty period.
Any model that is no longer available will be
replaced by a model of a value and with such
features as we consider appropriate in the
circumstances. Goldair Ltd is not responsible
for freight forwarding charges, losses or
damage in transit.
If service is required after the warranty period
has expired, the product should be returned to
a qualified electrical technician. Service
outside of the warranty period will be at your
cost.
Consumers Guarantee Act (1993).
In accordance with the above act consumers
are advised that: The manufacturer does not
undertake that repair facilities and parts are
necessarily available for this product.
If any of the provisions of the foregoing are
contrary to any relevant legislation, then that
provision shall be deemed to be excluded from
the warranty and the rest of the provisions will
continue to apply.
Name ………………………………………………
Address ……………………………………………
……………………………………………………….
Suburb ……………………………………………
Purchased from …………………………………
Date of purchase …………………………………
Name of product …………………………………
Model no ……………………………………………
IMPORTANT: Please retain this warranty card
Two year warranty