Goldair GK155 User manual

CordlessKettle
Model: GK155
Operating Instructions

Thank you for choosing a Goldair Electric Kettle. This Goldair
appliance has been designed and manufactured to high standards
of engineering and with proper use and care, as described in this
leaflet, will give you years of useful service. Please read these
instructions carefully.
ALWAYS
✔Always ensure hands are dry before
handling the plug or the Kettle.
✔Always operate the Kettle on a secure, dry,
level surface.
✔Always allow adequate air space above and
on all sides for air circulation. Do not allow the
Kettle to touch curtains, wall coverings,
clothing, dishtowels or other flammable
materials during use. Do not use under
cupboards or curtains.
✔Always be sure to unplug from the socket
when not in use and before cleaning.
✔Always allow the Kettle to cool before
cleaning and storing.
✔Carry out regular checks of the supply cord
to ensure no damage is evident.
✔Return the Kettle after a malfunction, or if it
has been damaged in any manner to an
authorised electrical service technician for
examination, repair or adjustment as special
purpose tools are required.
NEVER
✘Never touch hot surfaces.
✘Never use this appliance outdoors.
✘Never use this appliance for any purpose
other than its intended use. This appliance is
for household use only.
✘This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities or lack
of experience and knowledge, unless they are
supervised or have been given instruction
concerning the use of the Kettle by a person
responsible for their safety.
✘Close supervision is necessary when the
appliance is near children.
✘Never leave the appliance unattended when
in use.
✘Never place this appliance on or near a hot
gas or electric burner or where it could touch a
heated oven or microwave oven.
✘Never immerse any part of the Kettle, or
cord set and plug in water or any other liquid to
protect against electrical hazards.
✘Never use harsh, abrasive or caustic
cleaners to clean this appliance.
✘Never operate the appliance with a
damaged cord or plug, after it malfunctions, or
if it has been damaged in any manner.
✘The Kettle is not intended to be operated by
means of an external timer or separate
remote-control system.
CAUTION:
THE KETTLE GENERATES HEAT AND STEAM DURING USE. PROPER
PRECAUTIONS MUST BE TAKEN TO PREVENT THE RISK OF BURNS,
SCALDS, FIRES OR OTHER DAMAGE TO PERSONS.
General care and safety guide
TECHNICAL SPECIFICATION
Model No: GK155
Power Supply: 220-240V, 50Hz AC only
Power: 1850 –2200W

1. On/Off Switch
2. Neon Power Light
3. Handle
4. Water Gauge
5. Power Base
6. Lid Release
FEATURES
•Automatic cut out boil-dry protection.
•Easy read water gauge.
•High quality thermostat.
•Cord storage in power base to adjust to
desired length.
CAUTION: Too little water may damage the
heating element and too much water may cause
water to splatter from the kettle.
1,
3
5
4
2
6
Components

SUPPORT AND TECHNICAL ADVICE
PO Box 100707, NSMC, Auckland, New Zealand
Monday –Friday 8am-5pm
Phone: [phone]
Website: www.goldair.co.nz
Before first use, it is recommended that you fill
the kettle to the maximum level mark with fresh
tap water, boil, and empty the kettle at least
two times to clear the kettle of any dust or
materials from the manufacturing process. Do
not drink this water.
1. Remove the kettle from the base to fill
it. Press the two buttons on either side
of the lid inwards simultaneously to
open it. Pour water into the kettle to the
desired level, (no less than MINIMUM
and no more than MAXIMUM) press the
lid shut and place the kettle back on the
base unit.
2. Connect the plug into a power outlet,
turn the kettle on by pressing the
switch. Ensure the kettle is positioned
so the spout is facing away from you.
3. The kettle will automatically switch itself
off once the water has boiled and the
blue neon light goes off.
4. Lift the kettle from the base and pour
the water into a container or cup.
5. The boiling process can be terminated
at any time by lifting the kettle off the
power base.
WARNING: POSITION LID SO THAT STEAM
IS DIRECTED AWAY FROM THE HANDLE.
WARNING: DO NOT REMOVE THE LID
WHILE THE WATER IS BOILING
USE ONLY THE STAND PROVIDED WITH
THIS APPLIANCE
CAUTION: DO NOT OPERATE THE KETTLE
ON AN INCLINED PLANE
DO NOT MOVE THE KETTLE WHILE IT IS
SWITCHED ON
CAUTION: ENSURE THAT THE KETTLE IS
SWITCHED OFF BEFORE REMOVING IT
CARE AND CLEANING
1. Do not attempt to dismantle the kettle
or power base. There are no user
serviceable parts. For service or repair,
contact an authorised electrical service
technician.
2. To prolong the kettle’s life, please clean
the mineral deposits in the kettle
regularly.
3. Always unplug from the plug socket and
allow to cool before cleaning.
4. Do not immerse the power cord, kettle
or power base in water.
5. Do not use chemicals, steel wool, or
abrasive cleaners to clean the outside
of the kettle as these will scratch the
surface and fade the exterior colour.
6. Periodical de-scaling is required. The
interval of de-scaling depends on the
hardness of water in your area and
frequency of use.
Cleaning Method (De-scaling):
1. Fill the kettle with 0.5lt of white vinegar
and the remainder with water and allow
to stand for at least one hour.
2. Empty the solution from the kettle. Wipe
the remaining deposits with a damp
cloth.
3. Fill the kettle with clean water, bring to
boil and then discard the water. Repeat
at least once or until no mineral
deposits are left and the kettle will be
ready to use.
4. Grasp the top of the scale filter and pull
upwards to remove. Wash with clean
water and dry thoroughly before
replacing in the kettle.
Operating your kettle

Your Goldair product has been inspected and
tested and is guaranteed subject to the
following for a period to two years from the
date of purchase against defects in
workmanship and materials. During this
period, such defects will be rectified by repair
or replacement of the product purchased.
Your product contains no user serviceable
components and this warranty becomes
invalid if in our opinion the product has been
misused, abused, incorrectly installed,
tampered with, connected to an electrical
supply not corresponding with the name plate
specification, or subjected to power surges.
The warranty does not include any labour or
other associated expense that may be
involved in removal or installation of the
product. Normal wear and tear is expressly
excluded.
If your Goldair product fails to operate
satisfactorily, please return it to the retailer
from whom it was purchased. To obtain a
repair or replacement product under this
warranty, you will need to produce satisfactory
evidence of date of purchase. The completed
warranty and purchase receipt must be
presented with the product. The warranty
should be filled out at the time of purchase. It
is in your interest to make sure this is done.
If the product is to be replaced (cannot be
repaired) then that replacement will be of the
same or similar product or accessory
excluding packaging, instruction card etc.
Where a replacement product is supplied, this
shall be guaranteed for the balance of the
original warranty period.
Any model that is no longer available will be
replaced by a model of a value and with such
features as we consider appropriate in the
circumstances. Goldair Ltd is not responsible
for freight forwarding charges, losses or
damage in transit.
If service is required after the warranty period
has expired, the product should be returned to
a qualified electrical technician. Service
outside of the warranty period will be at your
cost.
Consumers Guarantee Act (1993).
In accordance with the above act consumers
are advised that: The manufacturer does not
undertake that repair facilities and parts are
necessarily available for this product.
If any of the provisions of the foregoing are
contrary to any relevant legislation, then that
provision shall be deemed to be excluded from
the warranty and the rest of the provisions will
continue to apply.
Name ………………………………………………
Address ……………………………………………
……………………………………………………….
Suburb ……………………………………………
Purchased from …………………………………
Date of purchase …………………………………
Name of product …………………………………
Model no ……………………………………………
IMPORTANT: Please retain this warranty card
Two year warranty