Golden Compass Sport GP605 CC User manual

Compass Sport™
Owner’s Manual
Compass Sport ™
Center-Wheel Drive Power Chair
GP605 CC/GP605 SS
401 Bridge Street, Old Forge PA 18518
Tel: [phone] Fax: [phone]
www.goldentech.com

2
FOR YOUR RECORDS
Please fill in your Compass Sport™ information below. This information will be useful in
the event that you ever need to contact Golden Technologies, Inc. concerning your power
chair.
Your Compass Sport™
Your Golden Technologies, Inc. representative or provider
Name ____________________________________
Company _________________________________
Address ________________________________________________________________
Please remember to fill in and return your warranty registration card.
ITEM CHECKLIST
Your Compass Sport™ shipped with the items listed below.
Before assembly or disposal of the packaging material, please make certain you have
received all the items listed.
1. Base (Frame with power module, joystick cable, wheels, footplate, and shrouds)
2. Seat assembly with arms and accessory receiver
3. Safety Flag
4. Charger with storage pouch
5. Joystick
6. Seat Belt
7. Batteries (Two – U1) with battery cables included
DISCLAIMER
We ask that you read this manual completely before operating your new Compass
Sport™. Golden Technologies, Inc. is not and cannot be held responsible for any damage
or injury incurred due to improper or unsafe use of the Compass Sport™, power chair.
Golden Technologies, Inc. specifically disclaims responsibility for any bodily injury or
property damage that may occur during any use that does not comply with applicable
federal, state, or local laws or ordinances.
Model _______________________________ Serial Number ___________________________
Date of Purchase ____________________ Body Color _______________________________
Options _____________________________

3
CONTENTS
INTRODUCTION ……………………………………………………... 4-5
SAFETY..............................................................……….......................... 6-9
EMI/RFI ........................................................…….…….......................... 10
SPECIFICATIONS…………………………………………………….. 11
ASSEMBLY/DISASSEMBLY………………………………………..... 12-16
COMFORT SETTINGS……………………………………………...... 17-20
OPERATION/DIAGNOSTICS ……………………………………...... 21-27
BATTERY CHARGING ……………………………………………..... 28-29
CARE AND MAINTENANCE ……………………………………...... 30
WARRANTY………………………………………………………….... 31-32
REGISTRATION CARD…………………………………………….... 33

4
INTRODUCTION
Congratulations on the purchase of your new Compass Sport™ power chair. The
Center-wheel drive Compass Sport™ combines cutting-edge technology with an attractive
design that is also highly functional in today’s world. We at Golden Technologies, Inc.
know that you have chosen a power chair that will give you years of dependable
operation and also will enhance the quality of your life by providing you with the mobility
to experience an active daily lifestyle.
Even though your new Compass Sport™ is both user-friendly and designed for maximum
maneuverability in even the tightest spaces, we ask that you please read, understand
and follow all of the instructions and suggestions in this manual before you operate your
Compass Sport™ for the first time. The safe use of your new power chair is very
important to us.
If you feel that you do not understand the instructions and suggestions presented in this
owner’s manual, or if, for any reason, you do not feel capable of performing the activities
necessary to assemble, disassemble, operate, or maintain your Compass Sport™ please
contact your local Golden Technologies, Inc. representative or call Golden Technologies,
Inc. Technical Support Services at [phone].
Golden Technologies, Inc. cannot be held responsible for personal injury or property
damage resulting from the unsafe or the improper use of any of our personal mobility
products. Our Research and Development Department, our Quality Control Department,
and our Engineering Department have used the latest product specifications and the
latest product design information to produce your Compass Sport.
Golden Technologies, Inc. reserves the right to implement changes into our product lines
when those changes become desirable or necessary. If changes are implemented into our
product line, there may be minor differences between the product you purchased and the
illustrations and instructions in this owner’s manual.
Please fill out and mail the enclosed warranty registration card on page 33. We at Golden
Technologies, Inc. would appreciate hearing about the dependability of your Compass
Sport™ and about the convenience of mobility it has provided for you. We would also
appreciate hearing about the service you received from your local Golden Technologies,
Inc. representative.
Web Site: www.goldentech.com
Golden Technologies, Inc. Phone: [phone]
401 Bridge Street Fax: [phone]
Old Forge, PA 18518 Toll free: [phone]

5
INTRODUCTION
ACCESSORIES for the Compass Sport
A variety of accessories are available for your Golden Compass Sport. Please contact your
Authorized Golden Technologies Provider for more information or to order.
*Some accessories require a mounting bracket or mounting clips. Please check with your
provider to find out if the accessory you would like to order requires a mounting bracket or
mounting clips.
Safety Guidelines
The symbols below are used in the owner's manual and/or on the product to identify
warnings and to notify you of important safety information. Make sure you read and
understand them completely.
WARNING! Indicate(s) a hazardous situation which, if not avoided, could result
in death or serious injury. This icon is represented as a black symbol on a yellow
triangle with a black border.
MANDATORY! Failure to perform mandatory actions can cause personal injury
and/or equipment damage. This icon is represented as a white symbol on a blue
dot with a white border.
PROHIBITED! Indicate(s) an action(s) that should not be performed under any
circumstance. Failure to adhere can cause personal injury and/or equipment
damage. This icon is represented as a black symbol with a red circle and red
slash.
Safety Symbols
The symbols below identify warnings, mandatory actions, and prohibited actions. They can
be found in the owner’s manual and/or on the product. Make sure you understand all
safety labels before operating the product. Do not remove safety labels from the product.
Read and follow the Explosive conditions Indoor use only!
owner’s manual! exist!
Use only AGM or Avoid transmitters! Hot surface!
Gel-Cellbatteries!
Pinch/Crush Hazard! Do not place into trash! Electrical hazard!
Corrosive chemicals
Do not use personal
inside battery! Recycle electronic devices!
• Cane Holder Tube
• Oxygen Tank Holder
• Cup Holder
• Quad Cane Holder
• Walker Holder
• Crutch Holder
• Safety Flag
• Power Chair Cover
• Deluxe Pack N’ Go
• Seat Belt

6
SAFETY
Your Compass Sport™ is a battery-operated personal mobility vehicle. Please exercise
caution and consideration when you are operating it. Driving your Compass Sport™
carefully and thoughtfully will help ensure your personal safety and the safety of other
people.
MANDATORY! Read and follow the owner’s manual before operating your
power chair.
Before operating you Compass Sport, please ensure you read and
understand this owner’s manual in its entirety. If any uncertainty exists after reading
this manual, please ask for further instruction or training from your authorized Golden
Provider / Representative.
BEFORE GETTING ON YOUR Compass Sport™
Check to be certain that the power is turned off. See “Operation” on pages 21-27. This
will eliminate the possibility of accidentally activating the joystick and causing injury to
yourself or to others.
Check to be certain that your Compass Sport™ is not in freewheel mode. See the
“Operation” section on page 26.
Flip up the armrests.
If your chair is equipped with leg rests, move them to the sides.
If your chair is equipped with a footrest, flip it to the “up” position.
GETTING ON YOUR Compass Sport™
 Carefully seat yourself comfortably and securely on the seat.
 Adjust the leg rests or flip down the footrest.
 Flip down the armrests.
 Fasten the seat belt.
GETTING OFF YOUR Compass Sport™
 Make certain that the power is turned off.
 Unfasten the seat belt.
 Flip up the armrests.
 Flip up the footrest, or move the leg rests to the sides.
 Carefully stand and step away from the chair.
MAXIMUM WEIGHT
Your Compass Sport™ has been rated to a maximum payload (passenger and anything
else being carried on the Compass Sport™) of 300 pounds. Exceeding the maximum
weight rating will void the warranty.
Exceeding the maximum weight capacity will void your
warranty and may result in injury to yourself or others.

7
SAFETY
DRIVING ON AN INCLINE
Drive with caution when attempting to negotiate any incline, even handicap access
ramps.
Try to keep your Compass Sport™moving when climbing an incline. If you do come to
a stop, restart and accelerate slowly and carefully.
Always climb or descend a gradient by driving straight up or straight down the face of
the slope.
Do not traverse or drive across the face of a gradient.
Do not attempt to negotiate an incline that is covered with snow, ice, cut or wet grass,
leaves, or any other potentially hazardous material.
Do not back down an incline.
Do not try to descend or climb an incline that is greater than the maximum incline
stated in the specifications section of this manual.
If, while you are driving down a slope, your chair starts to move
faster than you feel is safe, gently release the joystick and allow your Compass Sport™ to
come to a stop. When you feel that you again have control of your power chair, adjust the
speed control to a lower setting, then push the joystick forward and continue safely
down the remainder of the slope.
MEDICATION
Always check with your physician to determine if any of the medications you are taking
may affect your judgment and/or your ability to operate your Compass Sport™.

8
SAFETY
SAFETY RULES
Do not attempt to use your Compass Sport™ on an escalator. Always use an elevator.
Do not carry passengers on your power chair.
Do not operate your Compass Sport™ if it is not functioning properly.
¨Use caution when driving on soft or uneven surfaces such as grass, gravel, and on
decks where there is no railing.
Never drive on the roadway, except when you must cross the street.
Always cross streets at intersections and use the most direct route, making sure
that your path is clear and that you are visible to motor traffic.
It is not recommended to drive your Compass Sport™ up or down a step or curb that
is higher than 1 1/2 inches.
Never back up or down a step or curb.
Never operate your Compass Sport™ while you are under the influence of alcohol.
Do not operate or store your power chair where it will be exposed to rain, snow,
mist, and below freezing temperatures.
Do not operate your power chair on slippery, icy or salted surfaces.
Never sit on your power chair when it is in freewheel mode and on an incline or
decline.
Do not modify your power chair in any way that is not authorized by Golden
Technologies, Inc.
Do not disassemble the tire. If disassembly is required, have your authorized
Golden Compass Sport provider perform any necessary maintenance or repair.
Do not attempt to inflate the tires of your Golden Compass Sport™. Your Golden
Compass Sport™, is equipped with foam-filled flat free tires that do not require inflation.
Never sit on your Compass Sport™ when it is being transported.
Always fasten down your Compass Sport™ securely with an approved tie-down system
while transporting your power chair.

9
SAFETY
Please be sure to follow these important warnings for the Golden Compass Sport power
wheelchair:
NEVER TRANSFER ON OR OFF OF THIS POWER WHEELCHAIR USING THE SEAT
BACKREST FOR SUPPORT DURING TRANSFER. THE SEAT BACK MAY FOLD DOWN
AND MAY CAUSE YOU TO LOSE YOUR BALANCE AND COULD RESULT IN
PERSONAL INJURY.
DO NOT ALLOW ANYONE EXCEPT AN AUTHORIZED GOLDEN TECHNOLOGIES, INC.
REPRESENTATIVE TO CONNECT ANY ELECTRICAL OR MECHANICAL DEVICE TO
YOUR COMPASS SPORT™. UNAUTHORIZED ACCESSORIES WILL VOID THE
WARRANTY AND MAY CAUSE INJURY.

10
EMI/RFI
The rapid development of electronics, especially in the area of communications, has
saturated our environment with electromagnetic (radio) waves that are emitted by
television transmitters, cellular phones, citizen’s band radios (CBs), amateur radios (ham
radios), wireless computer links, microwave transmitters, paging transmitters, etc. These
electromagnetic (EM) waves are invisible and increase in strength the closer one gets to
the source of transmission. When these energy waves act upon electrical devices and
cause them to malfunction or to function in an erratic or uncontrolled manner, they are
referred to as Electromagnetic Interference (EMI) or Radio Frequency Interference (RFI).
EMI/RFI AND YOUR Compass Sport™
All electrically powered vehicles, including power chairs are susceptible to EMI/RFI. This
interference could result in abnormal, unintended movement of a power wheelchair.
Unintended movement or brake release could cause an accident
or injury.
The FDA has determined that each make and model of power chair can resist EMI/RFI to
a certain level. The higher the level of immunity, the greater the degree of protection from
EMI/RFI measured in volts per meter (V/m). The FDA has also determined that current
technology is capable of providing 20 V/m of immunity to EMI/RFI, which would provide
useful protection against common sources of interference. This product has been tested
and has passed an immunity level of 20 V/m.
EMI/RFI RECOMMENDATIONS
PROHIBITED! Do not turn on or use hand-held personal electronic
communication devices such as cellular phones, walkie-talkies, and CB
radios while your power chair is turned on.
Be aware of any nearby transmitters (radio, television, microwave, etc.) on your
in-tended route and avoid operating your chair close to any of those transmitters.
Turn off the power if your Compass Sport™ is going to be in a stationary position for
any length of time.
Be aware that adding accessories or components or modifying your power chair may
make it more susceptible to EMI/RFI.
If unintended movement or brake release occurs, turn your power chair off as soon as
it is safe to do so.
Report all incidents of unintended movement or brake failure to your Golden
representative or to Golden Technologies, Inc. at [phone].
Turn off your power chair as soon as it is safely possible if
unintended or uncontrollable motion occurs or if unintended brake release occurs.

11
SPECIFICATIONS
Model GP605 CC GP605 SS
Medicare Code K0823 K0822
Maximum Incline 6 degrees 6 degrees
Weight Capacity 300 lbs. 300 lbs.
Maximum Speed 4 mph 4 mph
Operating Range124 miles 24 miles
Ground Clearance 3.25” 3.25”
Turning Radius 19.5" 19.5"
Type Batteries 2-U1 2-U1
Colors Red, Blue Red, Blue
Charger Off Board Off Board
Controller 40 Amp 40 Amp
Dimensions:
Length 39" 39"
Width (outside of tires) 24" 24"
Height (ground to top of back of seat) 38” – 40” 40” – 42”
Height (ground to top of back of headrest) 45” – 50.5” 47” – 52.5”
Ground to Top of Seat 21” – 23” 19” – 21”
Number of Seat Height Positions 3 3
Size of Increments 1” 1”
Weight of Unit: (assembled) 185 lbs. 179 lbs.
Base 92 lbs 92 lbs
Seat (18 X 18 Solid Pan Seat) 40 lbs.
Seat (18 X 18 Captain's Chair Seat) 46 lbs.
Batteries U1 - 22 lbs U1 - 22 lbs
Tires: Flat Free Flat Free
Center Drive Wheels (2) 10” 10”
Casters (4) 6” 6”
Standard Seat: Captain’s Seat Captain’s Van/Pan
Back Height-no headrest 19” 23”
Back Height with headrest 26.5” – 29.5” 30.5” – 34.5”
Width x Depth (Adjustable Depth) 18” x 18” 18” x 18”, 20” x 18”, 20” x 20”
Color Gray Vinyl Coffee/Sand, Charcoal/Gray
Electric Rise Seat (Option) N/A N/A
Pneumatic Rise Seat (Option) N/A N/A
Footrest: Yes Yes
Height adjustable 3" - 7” 3" - 7”
Angle adjustable 0 – 35 degrees 0 – 35 degrees
Length adjustable (Option) Yes Yes
Warranty:
Frame Lifetime Lifetime
Drive Train 13 months 13 months
Electronics213 months 13 months
Batteries 12 months 12 months
1. Battery range tested at 200 lbs., and will vary due to rider weight, drive surface, and terrain.
2. Electronics warranty excludes batteries.
Literature is current at the time of printing. Golden Technologies reserves the right to make changes to the product or
literature at any time.

12
ASSEMBLY/DISASSEMBLY
Your Compass Sport™ is shipped partially disassembled in order to maximize the
protection of all its parts during the shipping process. Please follow the instruction below
to quickly and easily assemble the power chair for your use.
You will need only basic tools. If you do not have the required tools, or if
you do not feel capable of safely assembling your power chair, please contact your local
Golden Technologies, Inc. representative.
Main Components
1. Base (Frame with power module, joystick cable, wheels, footplate, and shrouds)
2. Seat assembly (Seat, headrest, arm assemblies, and accessory receiver)
3. Joystick
4. Batteries (Two – U1)
5. Seat Belt
Joystick Batteries
Seat Assembly
Joystick
Arm Assembly
Battery Covers
Caster Arm Cover
Caster
Footplate
Drive Wheel
Center Wheel Fenders
Free Wheel Levers
Seat Swivel Lever
Seat Belt
Headrest
Accessory Receiver
(not shown)

13
ASSEMBLY / DISASSEMBLY
Your Compass Sport™ will not power up or operate without completing
the following steps.
1. Remove front and rear battery covers. Refer to “Accessing the Batteries” on page 15.
2. Make sure both battery harnesses are plugged into the power chair and locked. See
figure 7 on page 15, and figure 10 on page 16.
3. Make sure the power harness is plugged into the power module and locked. See
figure 1 on page 14.
4. Replace the front and rear battery covers.
SEAT INSTALLATION/REMOVAL
Make sure the joystick cable does not interfere with the seat during installation.
The standard (18 x 18) seat assembly weighs about 46 pounds. Please
ask for help if you do not feel capable of safely lifting that much weight. Removal
of arms will significantly reduce the weight of seat.
Be sure the seat is correctly installed and locked before operating
your power chair.
Never pull on the arms or use them as a handle to move the power
chair as they could inadvertently pull out of the receiver bar causing injury.
INSTALLATION
1. To install the seat, align the seat post stinger on the bottom of the seat with the hole
in the seat post on the chair. See figures 2 and 3 on page 14.
2. Push down on the seat and rotate the seat until it aligns and locks in place. See
figure 3 on page 14.
3. Attach the arms by loosening the arm width adjustment knobs. See figure 18 on page
20. Insert the arms into the receiving tube on the seat, adjust the arms to your desired
width, and tighten the arm width adjustment knobs to secure the arms in place.
4. Attach the joystick. See “Joystick Installation/Removal” on page 14.
5. Connect the joystick cable. See figure 5 on page 14.
6. Lift the backrest angle adjustment lever (See figure 4 on page 14) and while holding
the lever, lift the seat back to an upright angle, then release the lever to lock the seat
back in place.
REMOVAL
1.With one hand brace the seat back. With the other hand lift the backrest angle
adjustment lever and while holding the lever, lower the seat back flat against the seat.
Lifting the Backrest Angle Adjustment Lever will cause the back to
automatically close towards the seat. Improper handling may result in injury.
2. Disconnect the cable from the joystick. See figure 5 on page 14.
3. Remove the arms by loosening the arm width adjustment knobs, then slide each arm
out to remove. See figure 18 on page 20.
4. Lift the seat up and off the seat post receiver.

14
ASSEMBLY / DISASSEMBLY
JOYSTICK INSTALLATION/REMOVAL
1. Loosen the joystick adjustment knob. See figure 5.
2. Slide the joystick assembly into the joystick bracket to the desired position.
3. Tighten the adjustment knob.
4. Route the joystick cable up between the arm receiver tube and the seat. See figure 18
on page 20.
5. Connect the cable to the joystick, and secure the cable to the joystick bracket clip. See
figure 5.
6. To disassemble, turn the joystick controller off, then reverse the process above.
Figure 5
Power Cable Seat Post Stinger
Seat Swivel Handle Backrest Angle
Adjustment Lever
Seat Post
Joystick Cable
Adjustment Knob
Figure 1 Figure 2
Figure 3 Figure 4

15
ASSEMBLY / DISASSEMBLY
ACCESSING THE BATTERIES
1. Remove the seat. Refer to “Seat Removal” on page 13.
2. Remove the battery covers by lifting up on the outer edge of the covers. See figure 6.
Figure 6
There is a “Battery Connection Diagram” located on the inside of the rear
battery cover. See figure 7.
Figure 7
The batteries weigh 22 pounds each. (Battery weights may vary
depending on the manufacturer). Please ask for help if you do not feel capable of safely
lifting that much weight.
Lift cover up
Rear Cover
Front Cover
Black Black
Orange
Black
Battery Battery
Orange
Fuse
Rear Front
Fuse
Red Red
Red

16
ASSEMBLY/ DISASSEMBLY
BATTERY INSTALLATION/REMOVAL
Figure 8 Figure 9
Figure 10
1. Use the screws, washers, and nuts provided to connect the positive (red booted)
connector of each cable to the positive (+) terminal of each battery. See figure 8 and
figure 9.
2. Use the screws, washers, and nuts provided to connect the negative (black booted)
connector of each cable to the negative (-) terminal of each battery.
3. Place the batteries into the battery tray. Be certain the color coded connectors match.
Refer to the “Battery Connection Diagram” shown in figure 7 on page 15.
4. Secure the batteries in place using the buckle straps. See figure 10.
5. Connect each color coded battery cable connector to the corresponding connector on
the base unit. See figure 10.
6. Install both battery covers.
7. To disassemble, reverse the above process.
Battery shown with
cable connected
properly.
Nut
Black (-)Red (+)
Color Coded
Connector
Color Coded
Connector
Lock Washer
Flat Washer
Battery Terminal
Ring Terminal
Flat Washer
Bolt
Battery
Buckle Strap
Buckle Strap

17
COMFORT SETTINGS
1. Seat height 2. Headrest height 3. Backrest angle 4. Armrest angle
5. Footrest angle 6. Footrest height 7. Armrest height 8. Armrest width
9. Joystick length
Make certain that the power to your Compass Sport™ is turned off
before making any adjustments, to eliminate the risk of the joystick being accidentally
bumped and activating the power chair.
If you do not feel capable of safely making these adjustments, please
contact your local Golden representative.
SEAT HEIGHT ADJUSTMENT
The seat post is a design that is adjustable in height. Adjustment is made by removing
the seat post bolt, raising or lowering the seat post to the desired height and reinstalling
the seat post bolt. See figure 11.
Figure 11
Seat Post
Nut (17mm) Seat Post Bolt
(8mm Allen)
COMFORT SETTINGS
You may be spending a great deal of time on your Compass Sport™. To provide you with
the maximum seating comfort, Golden Technologies, Inc. has designed this power chair
to incorporate the following adjustments for operator comfort.

18
COMFORT SETTINGS
HEADREST HEIGHT ADJUSTMENT
1. Standing behind the chair, push and then release the clamp on the left post of the
headrest while you are pulling up or pushing down on the head rest. See figure 12.
2. The headrest will “click” to a stop in one of the preset positions.
3. Repeat step 1 until the headrest is at the desired height.
Figure 12 Figure 13
BACKREST ANGLE ADJUSTMENT
The backrest can be folded down to minimize chair height during transport.
1. Pull up on the adjustment lever (see figure 13) and push against the back rest until
the backrest is in the desired position.
2. Release the lever.
3. To return the backrest to the upright position, pull up on the lever and move the
backrest to the desired position.
ARMREST ANGLE ADJUSTMENT
1. Lift armrest up. See figure 14.
2. Turn jam nut counter-clockwise with a 14mm wrench to loosen.
3. Turn the adjustment bolt using a 6mm Allen wrench to raise or lower the armrest
angle. Turning the bolt counter-clockwise will raise the angle. Turning the bolt clockwise
will lower the angle. Turn until desired angle is reached.
4. Re-tighten jam nut by turning clockwise.
5. Repeat steps 1-4 on the other armrest.
Figure 14
Figure 14
Backrest Angle
Adjustment Lever
Headrest Clamp
Jam Nut
(14mm)
Adjustment Bolt
(6mm Allen)

19
COMFORT SETTINGS
FOOTREST ANGLE ADJUSTMENT
1. Fold the footrest upward for easy ac-cess to the angle adjustment bolt. See figure 15.
2. Turn the jam nut counter-clockwise with a 17mm wrench to loosen.
3. Use a 8mm Allen wrench to turn the adjustment bolt. Turn the adjustment bolt
counter-clockwise to increase the footrest angle. Turn the adjustment bolt clockwise to
decrease the footrest angle.
4. When the desired footrest angle is reached, re-tighten the jam nut.
Figure 15
FOOTREST HEIGHT ADJUSTMENT
1. Remove front cover.
2. Use a 13mm socket and 5mm Allen wrench to remove the bolts. See figure 16.
3. Slide the footrest to the desired height.
4. Align the bolt holes in the footrest and the footrest bracket.
5. Install and tighten the bolts.
Figure 16
Footrest Angle
Adjustment Bolt
(8mm Allen)
Footrest Height
Adjustment Bolts
(5mm Allen)
Jam Nut (17mm)
Nuts (13mm)

20
COMFORT SETTINGS
Figure 17 Figure 18
Figure 19
ARMREST HEIGHT ADJUSTMENT
1. Loosen the two armrest height adjustment screws on the outside of the armrest with a
3mm Allen wrench until you can slide the armrest up and down freely. See figure 17.
2. Raise or lower the armrest to the desired position.
3. Retighten the two adjustment screws to lock the armrest into that position.
4. Repeat steps 1-3 to adjust the opposite arm.
ARMREST WIDTH ADJUSTMENT
1. Loosen the adjustment knob at the rear of the seat. See figure 18.
2. Slide the arms in or out to the desired width.
3. Tighten the adjustment knob to secure the arm.
4. Repeat steps 1-3 to adjust the opposite arm.
JOYSTICK BRACKET LENGTH ADJUSTMENT
1. Loosen the adjustment knob. See figure 19.
2. Slide the joystick holder in or out to the desired position.
3. Tighten the adjustment knob.
Joystick Adjustment Knob
Adjustment
Knob
Allen
Screws
(3mm)