Goldmedal 8223 User manual

Part No. 88189
Revised:March 2008
ROLLER GRILL
Instruction Manual
Model #8223, 8224, 8225

SAFETY PRECAUTIONS

Models #8223, #8224, #8225
3
FORWARD
This manual covers the model # 8223, # 8223 , 8225 ROLLER GRILLS
INSTALLATION
CHECKING SHIPMENT
Unpack the shipping crate and check thoroughly for any damage which may have occurred in
transit. Any claims should be filed immediately with the transportation company.
ELECTRICAL REQUIREMENTS
Voltage for your grills is 120 Volt, 60 Cycle, single phase. 8223, 8224 grills will draw a maximum of 11.5
amps. The 8225 will draw 1940 amps and requires a 20 amp plug. Your electrician must furnish sufficient
current for the proper operation of your machine. We recommend that this machine be fused on a line by
itself. The switches and controls which operate the warmer are located on the top front of the machine.

Models #8223, #8224, #8225
4
OPERATING INSTRUCTIONS
CONTROLS AND THEIR FUNCTIONS
ON/OFF SWITCH
Flipping this switch to the "ON" position energizes the motor that turns the rollers. This switch can be used
alone or with the heat turned on.
HEAT CONTROL
Turning this control counter-clockwise increases the amount of heat to the rollers.
THERE ARE TWO SETS OF THESE CONTROLS, ONE FOR EACH SET OF ROLLERS
CARE AND CLEANING
The stainless steel body of the grill is easy to keep clean. Usually a damp cloth will remove all dirt and
grease spots. NEVER USE ABRASIVES on the stainless steel body.

Models #8223, #8224, #8225
5
MAINTENANCE INSTRUCTIONS

Models #8223, #8224, #8225
6
ORDERING SPARE PARTS
1. Identify the desired part by checking it against the photos, illustrations, and/or the parts list.
2. When ordering, please include part number, part name, and quantity desired.
3. Please include your model name and machine serial number (located on the machine nameplate) with
your order.
4. Address all parts orders to:
Parts Department
Gold Medal Products Co.
10700 Medallion Drive
Cincinnati, Ohio 45241-4807
or, place orders at:
[phone]
[phone]
Fax: [phone]
E-mail: [email protected]

Models #8223, #8224, #8225
7
PARTS LIST
8224 8223 8225
Item No Part No Part No Part No Description
1 88169 88169 88169 Mounting Bracket Assebmly
2 88167 88167 88167 Element Support
3 88166 88166 88166 Insulator Board
4 88165 88165 88165 Conductor Plate
5 88362 88163 88163 Bottom Plate
6 88363 88164 88164 Drip Pan
7 88103 88103 88103 Control Panel Sticker
8 88376 88123 88236 Heat Element
9 88173 88173 88173 End Cover
10 87531 87531 87531 Drive Motor CW
11 87532 87532 87532 Drive Motor CCW
12 42532 42532 42532 DSPT Rocker Switch
13 22038 22038 87148 Lead In Cord
14 87589 87589 87589 Teflon Bearings
15 87297 87297 87297 Heat Control
16 87353 87353 87353 Dirve Sprocket
17 88231 88232 88232 Roller Assembly
18 87511 87511 87511 O-Rings
19 88192 88192 88192 Upper Drive Chain
20 88191 88191 88191 Lower Drive Chain
21 88228 88228 88228 Outer Retainer
22 88229 88229 88229 Inner Retainer
23 77521 77521 77521 8-32 x 3/4 Slot HX HD
24 87988 87988 87988 Idler Sprocket
25 8000 8000 8000 1" Dial Thermometer
26 38389 38389 38389 Knob, Control

Models #8223, #8224, #8225
8
WIRING DIAGRAM

Models #8223, #8224, #8225
9
WARRANTY
WE WARRANT to the original purchaser the Gold Medal equipment sold by us to
be free from defects in material or workmanship under normal use and service. Our
obligation under this warranty shall be limited to the repair or replacement of any
defective part for a period of six (6) months from the date of sale to the Original
Purchaser with regard to labor and two (2) years with regard to parts and does not
cover damage to the equipment caused by accident, alteration, improper use, voltage,
abuse, or failure to follow instructions.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESSED
OR IMPLIED, AND OF ALL OTHER OBLIGATIONS OR LIABILITIES ON OUR
PART, INCLUDING THE IMPLIED WARRANTY OF MERCHANTIBILITY.
THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION
ON THE FACE HEREOF. We neither assume, nor authorize any other person
to assume for us, any other obligation or liability in connection with the sale of said
GOLD MEDAL equipment or any part thereof.
The term “Original Purchaser” as used in this warranty shall be deemed to mean that
person, firm, association, or corporation who was billed by the GOLD MEDAL
PRODUCTS COMPANY, or their authorized distributor for the equipment.
THIS WARRANTY HAS NO EFFECT AND IS VOID UNLESS THE ORIGINAL
PURCHASER FIRST CALLS GOLD MEDAL PRODUCTS COMPANY AT 1-800-
543-0862 TO DISCUSS WITH OUR SERVICE REPRESENTATIVE THE
EQUIPMENT
PROBLEM, AND, IF NECESSARY, FOR INSTRUCTIONS CONCERNING
THE REPAIR OR REPLACEMENT OF PARTS.
NOTE: This equipment is manufactured and sold for commercial use only.
GOLD MEDAL PRODUCTS COMPANY
10700 Medallion Drive
Cincinnati, Ohio 45241-4807 USA