Goodmans 355881 User manual

COMPACT DVD PLAYER
GETTING STARTED
COMPACT DVD PLAYER
MODEL: 355881
Note: Do not connect the mains power until ALL connections
have been made
Plug the SCART lead into the SCART socket on the back of
the DVD player.
Plug the AV plugs on the other end of the SCART lead into
the AV sockets on your television as shown.
Connect the mains power lead into the DC 5V socket on
the back of the DVD player. Plug the power adapter into the
mains power wall socket and switch on.
Press the STANDBY button on the DVD player or remote
control to turn the player on.
1
2
3
4
Red
(audio right)
Yellow
(video)
White
(audio left)
RCA sockets
RED
WHITE
Y E L L O W
1
2
3
4
DVD/USB

THANK YOU
Thank you for choosing a Goodmans product. We’ve been making
electrical products for the British people for over 90 years. Each of
our projects has been carefully designed to be great at what it does
and this one is no exception. We hope you enjoy your new DVD
Player.
Please read the Guarantee & Safety booklet before starting.
DID YOU KNOW?
This DVD player has been designed to go into standby mode
automatically after approximately 20 minutes of inactivity. Just press
the STANDBY button to turn the DVD player back on again
In the box
DVD Player
Remote Control and
2 x AAA Batteries
Quick start guide
User Manual
Guarantee & Safety booklet
WHITE
YELLOW
RED
Mains power
adapter
Scart to RCA
adapter
DVD/USB
AAA
+
-
AAA
+
-
DVD Player with SCART
DVD Player with SCART
USER MANUAL
MODEL: 355881
Guarantee & Safety
DVD disc drawer
Press the button to
OPEN/CLOSE the drawer
for disc playback or
removal.
OPEN/CLOSE button
Press to OPEN/CLOSE the
disc drawer.
PLAY/PAUSE button
Press to PLAY/PAUSE the
DVD playback.
STOP button
Press to STOP DVD
playback.
Remote control sensor
STANDBY button
Press to power on or enter
STANDBY mode.
Power on/Standby LED
Green LED in Power on
mode and Red LED in
Standby mode
USB Port
Connect a USB memory
(MAX 32GB) stick to
display images & playback
supported videos
1
2
3
4
5
6
7
8
1
2
8
7
6
5
4
3
Install the remote control batteries
1. Press down the tab on the remote
control battery door, in the direction of
the arrow, to remove it.
2. Insert the 2 x AAA batteries supplied,
taking care to note the + and –
markings and position the batteries the
correct way around.
3. Replace the battery cover, making sure
that it ‘clicks’ shut.
AAA
+
-
AAA
+
-