
6
CD and CD+G Operation
Playing/Pausing a track
1Press the PLAY/PAUSE button to begin playback of the first track. The
Play/Pause indicator will light.
2To pause playback , press the PLAY/PAUSE button. The Play/Pause
indicator will flash.
3To resume playback, press the PLAY/PAUSE button again.
4To stop playback of the CD, press the STOP button. The total number of
tracks will be shown in the display.
DON’T FORGET!
If you are playing a CD+G disc, the song lyrics will be displayed when you
connect the CD Karaoke to your TV set with the supplied scart lead.
Skipping Tracks
1During playback, press the SKIP / buttons to skip to the next or
previous track.
Searching tracks (audio CD only)
1 During playback, press and hold the SKIP / buttons to search
forwards or backwards through the current track.
2 To resume playback, release the SKIP / buttons.
Repeating Tracks
1 During playback, to repeat the current track, press the REPEAT button once.
The Repeat indicator will flash.
2 To repeat all tracks on the disc, press the REPEAT button twice. The Repeat
indicator will stay lit.
3 To cancel the Repeat function, press the REPEAT button again. The Repeat
indicator will turn off.
Programming Tracks
1 In STOP mode, press the PROGRAM button. The Program indicator will
flash and “0” will show in the display.
2 Use the SKIP / buttons to select the first track you wish to
program.
3 Press the PROGRAM button to enter this into the memory.
4 Repeat steps 2and 3until all the desired tracks are programmed into the
memory.
DON’T FORGET!
A maximum of 20 tracks can be programmed into the memory.
5To begin playback of the programmed tracks, press the PLAY/PAUSE
button.
6To clear the programmed tracks, press the STOP button twice.
03