Goome U9 User manual

U9 USER MANUAL
1
U9 USER MANUAL
1. Product Features................................................................................................................................ 2
2. Product Specification......................................................................................................................... 3
3. Operation Guide.............................................................................................................................. 3
3.1 Package
.........................................................................................................................................
3
3.2 Start to Use
...................................................................................................................................
4
3.3 Installation Guide
.........................................................................................................................
5
3.4 Status Indication
...........................................................................................................................
5
3.5 Message Instruction
.....................................................................................................................
6
3.6 Query Instruction
..........................................................................................................................
8
4 Use the web service..........................................................................................................................10

U9 USER MANUAL
2
1. Product Features
U9 is a GPS+GSM/GPRS data terminal, which suitable for logistics and assets
protection. It is easy to install and easy to use, product main features:
-GSM Quad band supported.
-Newest generation u-blox GPS chipset u-blox 7.
-Wide range power input 8-45V DC.
-ACC(Ignition) detection.
-Fuel supply remote control.
-Internal battery for wire-cut alarm.
-Ultra-low power mode 1mA@12V.
-1000 points history trace can be saved when in no GSM coverage.
-Internal monitoring chip for automatic restore after system crash or error
detected.
-Quick GPS fixed with the u-blox Assisted-GPS technology.
-3 LEDs for status indication.
-Hardware design with surge protection.
-Protection for wrong wire connection.
-Managing GPS devices on the web.
-Managing GPS devices using Apps for android or iOS phone.
-Query device information using SMS.
-Real time tracking support.
-History trace playback.
-Self-defined GEO fence.

U9 USER MANUAL
3
2. Product Specification
-GSM Band: Quad Band GSM/GPRS supported
-GPRS: Class12/TCP/IP
-Working Voltage: 8-45vDC
-Working Current: 20mA@12vDC (ACC ON)
1mA @ 12vDC (ACC OFF)
-GPS Chipset: u-blox G7020
-GPS Channels: 56
-Tracking Sensitivity: -162dBm
-GPS Fixed Time Cold Start<29s(Open sky)
Warm Start<29s
Hot Start<1s
Aided Start 10s
-Battery 150mAh
-Working Temperature: -20℃~+60℃
-Humility: 20%~60%RH
-Size: 74.8mm x 47.8mm x 17.4mm
-Weight: 60g
-LED Indicators RED-GSM, YELLOWGREEN-GPRS, BLUE-GPS
3. Operation Guide
3.1 Package
Packing List:
-U9 Device 1PCS
-Power supply cable 1PCS
-User manual 1PCS
-RELAY (Optional)

U9 USER MANUAL
4
3.2 Start to Use
Important notice:
-Insert SIM card then connect the power to the device.
-SIM card must support GPRS service.
-SIM card must be in service.
-If SIM card require PIN code, please use other GSM mobile handset to
remove the pin code.
-For oversea user, please check if the APN settings require or not.
Fig 1 SIM Insert Direction

U9 USER MANUAL
5
3.3 Installation Guide
Fig 2 Connection Diagram
PIN No
Color
Description
1
RED
Power supply 8-45V DC
2
BLACK
Ground
3
GREEN
ACC detection, when key-in and turn to ACC position, ACC
goes level high.
4
YELLOW
Relay control driving signal
Please use 12V RELAY in 12V system, use 24V RELAY in 24V system like
bus and truck.
3.4 Status Indication
No
LED Color
Status
Descriptions
1
RED
Light
GSM work normal
Blink
No GSM signal
2
BLUE
Light
GPRS connected to the
server.
Blink
GPRS connection failed.

U9 USER MANUAL
6
3
YELLOW-GREEN
Light
GPS fixed.
Blink
GPS searching.
Note
3.5 Message Instruction
1) APN Settings
Instruction
Format
example
APN Setting 1
APN,
APN-Name,user,psw#
APN,ac.vodafone.es,vodafone,vodafone
#
APN Setting 2
APN, APN-Name#
APN,cmnet#
Note:
APN settings are difference in difference country, if password
required, please follow setting 1, otherwise setting 2.
Examples:
Send: APN,cmnet#
Return: Set APN OK!
2) TIMER Settings
Instruction
Format
example
TIMER Setting
TIMER,n#
TIMER,20#
Note:
When n=0, stop data upload, device working in ultra low power
mode, only phone call or query SMS will active the GPS work for a
moment.
When 10≤n≤300, device upload data every n seconds.
When n≥300, GPS work for a moment after n seconds, then shut
down GPS when finish the data upload.
Examples:
Send: TIMER,20#
Return: Normal working mode set successfully, upload interval is
20 seconds.
3) CENTER Number Setting
Instruction
Format
example
Add Center Number
CENTER,A,13812345678#
CENTER,A,13812345678#
Delete Center Number
CENTER,D #
CENTER,D#
Note:
1) Only center number can send RELAY control message command.
2) Only one center number can be set.
3) Center number will receive the wire-cut alarm notification.

U9 USER MANUAL
7
Examples:
Send: CENTER,A,13812345678#
Return: SET CENTER TEL OK. TEL Number is 13812345678.
4) RELAY Control
Instruction
Format
example
RELAY control enable
RELAY,1#
RELAY,1#
RELAY control disable
RELAY,0#
RELAY,0#
Note:
1) Send this message to make remote control like fuel
supplement.
2) Only work when the center number is being set.
Note: For safety reason, when device got this message, it will stop
the fuel supplement only when speed lower then 20Km.
Examples:
Send: RELAY,1#
Return: Fuel Cut Off: Success
5) WL (User Define Fence) Setting
Instruction
Format
example
User Define Fence
WLn
WL300
Note:
When Geo fence being set, device out of the defined area, sender
will get an alarm message.
Examples:
Send : WL400
Return : Set Geo-Fence succesfully.
6) Restore Factory Setting
Instruction
Format
example
Restore Factory default
FACTORY #
FACTORY #
Note:
Restore factory setting, part of settings will restore factory default.
Examples:
Send : FACTORY#
Return : Factory Reset OK
7) Device RESET
Instruction
Format
example
RESET
RESET #
RESET #
Note:
Device will reboot.
Example:
Send : RESET#

U9 USER MANUAL
8
Return : System Restart OK
8) Language Setting
Instruction
Format
example
Chinese
LANG,1#
LANG,1#
English
LANG,0#
LANG,0#
Note:
If Chinese selected, device will return message in Chinese, if
English was selected, it will return message in English.
Example:
Send: LANG,0#
Return: SET LANGUE OK, New LANGUAGE is ENGLISH.
9) GMT Time Zone
Instruction
Format
example
Time Zone Setting
GMT,E/W,0~12,0/15/30/45
GMT,E,8,0#
Note:
Device use UTC+8 as default time zone.
E: Ease；W: West
0~12, UTC difference.
0/15/30/45, Half time zone.
Examples:
Send: GMT,E,8,0#
Return: Now Time Zone is UTC+8.
3.6 Query Instruction
1) Query Parameters
Instruction
Format
example
Query Device Information
PARAM#
PARAM#
Note:
Use this instruction to query device main parameters.
Examples:
Send: PRARM#
Return:
SN:123456789012345; (Serial number)
APN: cmnet; (Access Point Name for GPRS network)
IP: U9.szdatasource.com:8841; (Server address)
TIMER: 10S; (Update period)

U9 USER MANUAL
9
CENTER TEL: [phone]; (Center phone number)
LANGUAGE: EN; (Language)
TIME ZONE: 8.00; (TimeZone)
2) Query Device Working Status
Instruction
Format
example
STATUS
STATUS#
STATUS#
Note:
Use this message to check the device working status, like GSM,
GPRS, GPS status.
Examples:
Send: STATUS#
Return:
EXT-POWER: 12.56V (External power supply voltage)
BATTERY: 100% (Internal battery level indication)
GPRS: NORMAL (Server connection indication)
GSM Signal : H (GSM signal level indication)
GPS: FIXED (GPS status indication)
GPS Signal: L (GPS signal level indication)
ACC: OFF (Ignition status indication)
Fuel Supply: OFF (Fuel supply indication)
3) URL
Instruction
Format
example
URL
URL#
URL#
Note:
Use this SMS to query the position on Google map.
Example:
<UTCTime:10-11-18
18:41:04>http://maps.google.com/maps?q=N22.540885,E113.951341
4) 123
Instruction
Format
example
Query address in Chinese
123
123
Note:
Use this SMS to query address in Chinese, if language is English,
it will return URL, the same as URL message.
Examples:
Send: 123
Return: “...”

U9 USER MANUAL
10
4 Use the web service
Visit web with the account and password that the distributor provided.
5 Trouble shooting
When finish installation, please check the device work normal or not? If work abnormal,
please check with the following steps:
1) Call the phone number on the device, check if the SIM register to the GSM network?
2) Is the APN being set for oversea user? Set the correct APN according the manual.
3) Is the SIM with GPRS service? You can use a cell phone to browser a web site to
check.
4) Please make sure you test the GPS in open sky.
5) Call for technical support, if the problem can not fix.