
20
• Durin use keep the suction tube, suction
hose and nozzles away from your head to
prevent injuries.
• For lon er use pull out at least 2/3 of the
cable len th to awed overheatin and
dama e.
• The appliance fulfils the applicable German
and European electrical standards as well
as the radio interference suppression
re ulation.
• Never use your vacuum cleaner for
vacuumin the buildin material (such as
fine sand, lime, cement dust etc.). Absorbed
buildin material can dama e your
appliance.
• When you are usin the vacuum cleaner
to ether for several hours, pull the
connectin cable to the end.
• Noise level: Lc < 78 dB(A)
CAU ION: Never use the vacuum cleaner
without the filters.
Vacuum cleaner use only for home and in the
inner rooms!
Do not use a vacuum cleaner in very dirty
places, it will immediately obstruct HEPA
filter!
C nnecti n t the mains
supply
Check, please, whether the volta e stated on the
data plate comply with the data of your house
mains supply.
Supply c rd
If the supply cord is dama ed, it must be
replaced with the suitable cord, or a set for
coilin the cable, which you can et in the
nearest Gorenje’s service outlet.
If the mains cord is dama ed, you must have it
replaced by Gorenje, a service centre authorised
by Gorenje or similarly qualified persons in order
to avoid a hazard.
Data n c mpliance with
eur pean standards
Test for this type of appliance confirmed that it
complies with the followin European directives:
• 2006/95/EEC Low volta e
• 93/68/EEC CE Markin
• 2004/108/EEC Directive on Electroma netic
Compatibility – EMC
This appliance is marked according to the
European directive 2002/96/EC on Waste
Electrical and Electronic Equipment (WEEE)
This guideline is the frame of a European-wide
validity of return and recycling on Waste
Electrical and Electronic Equipment
Eliminati n f the appliances
and envir nment
If one day you decide to chan e your appliance,
or you just do not need it any more, think about
the environmental protection.
Vacuum cleaner assembling
Always remove the plu from the power supply
before fittin or removin accessories. Before
puttin the appliance into service, please check if
all filters are inserted correctly.
ASSEMBLY OF THE SUCTION HOSE
• Insert the flexible suction hose into the
connection openin at the top of the
housin until you can feel it lock.
HOSE REMOVING
• To remove flexible hose from the vacuum
cleaner, press the buttons situated on the
flexible hose base, then pull to remove it
from the attachment point.
ROLLING THE CABLE OUT AND UP
• Pull out the cable to such a len th that easy
workin is ensured. Now connect the
appliance to the main supply. Press the
switch to activate the automatic rewinder
and hold on the mains plu for safety
reason.
FITTING TUBE WITH ACCESSORIES
AND USAGE
- Extend the telescopic tube to the desired
len th by holdin the button on the tube.
- Insert a flexible hose into telescopic tube.
- Fit a nozzle to the tube:
- Floor brush is appropriate for cleanin
bare floor and floor coverin s.
- Sofa turbo brush is appropriate for
cleanin smooth and bare floor (couch,
sofa, carpetin ).