Gotharman Audio Output ExpansionBox User manual

Gotharman’s
Audio Output Expansion
For Little deFormer 2
User Manual

Contents Of This Manual
Functionality 3
Connecting 4

Functionality
Thank you very much for purchasing/consider to purchase a Gotharman’s Audio Output Expansion
Box for Little de ormer 2.
When connecting the Audio Output Expansion to your Little de ormer 2’s Audio Port, you will get
a separate audio output for each of Little de ormer 2’s 4 audio busses.
The outputs you use, are not automatically muted on the main outputs 1 and 2. To mute any signals
from the main outputs, you must go to the “OUTPUT SELECT” page in the “COMMON” menu,
and switch the busses to the “Off” position.
This box will work with any firmware version of Little de ormer 2.
I hope you will enjoy it.

Connecting The Output Expansion Box
or connecting Output Expansion to your Little de ormer 2, you will need the 76 cm long 15-way
cable, that was supplied together with your Output Expansion.
Connecting:
-Make sure, that your Little de ormer 2 is turned off.
-Connect one end of the cable to the 15-way “Audio Port” on your Little de ormer 2, and the other
end to the 15-way port on the Output Expansion.
-Turn on your Little de ormer 2.
-Assign sample slots to different audio busses, and check it out.

Written by
lemming Christensen
”Gotharman”
2015
www.gotharman.dk