GoWISE USA GW88010 User manual

Please read through this manual carefully before use
IMPORTANT SAFEGUARDS AND TIPS
ELECTRIC 4IN1 MEAT GRINDER
& FOOD PROCESSOR
Model No.: GW88010
WWW.GOWISEUSA.COM
USER MANUAL

2
THANK YOU FOR YOUR PURCHASE!
Join
Contact Our Customer Care Team
Register Your Product
Specifications
Explore
the GoWISE Community on
Facebook, Instagram, Twitter, and
Pinterest for updates, tips, and
great deals!
855-233-9199
[e-mail]
Live Chat at gowiseusa.com
M-F 8:30am - 4:00pm MST
www.gowiseproducts.com/apps/
product-registration
(The serial number is normally
underneath the product. Please
check there first.)
Voltage: 120V, 60Hz
Wattage: 300W
Max. Locked Motor approx.
wattage: 800W
Overall Dimension (LxDxH):
10”x5.7”x12.1”
recipes on our recipe App or
www.gowiseproducts.com/blogs/
recipes

Register Your Product............................
Specifications...........................................
Important Safeguards...........................
Product Structure...................................
Set Up & Instruction...............................
Before First Use.............................
Assembling...................................
Mincing Meat.................................
Reverse Function...........................
Making Sausage............................
Making Kibbe.................................
Vegetable Attachments.................
Cleaning & Maintenance.......................
Warranty...................................................
2
2
4
6
8
8
8
10
10
11
12
13
14
16
TABLE OF CONTENTS

4
IMPORTANT SAFEGUARDS
HOUSEHOLD USE ONLY • READ ALL INSTRUCTIONS BEFORE USE
1.1. READ THE ENTIRE MANUAL
BEFORE ATTEMPTING TO
OPERATE.
2.2. Keep the box and packing
material for storage.
3.3. This appliance is intended for
household use only. DO NOT use
for commercial purposes. Using
the appliance for commercial
purposes will void the warranty.
4.4. ALWAYS make sure there is
no power to the unit when
assembling or disassembling
the unit. DO NOT attempt to
assemble or disassemble the unit
when it is plugged in.
5.5. This appliance is NOT INTENDED
FOR USE by persons (including
children) with reduced physical,
sensory or mental capabilities,
or lack of experience and
knowledge, unless they have
been given supervision or
instruction concerning use
of the appliance by a person
responsible for their safety.
6.6. This appliance is NOT INTENDED
FOR USE by children. Children
should be supervised to ensure
that they DO NOT play with the
appliance.
7.7. Close supervision is necessary
when any appliance is used near
children.
8.8. When carrying the unit be sure
to hold the body with both hands.
DO NOT carry the unit by the
hopper plate or head.
9.9. DO NOT use the cutting blade
and cutting plate when using
kibbe attachment.
10.10. To avoid injury, NEVER push
ingredients by hand. ALWAYS
use the food pusher to push
ingredients into the grinder.
11.11. DO NOT grind hard food such
as bones, nuts, etc. This may
damage the grinding gears.
12.12. DO NOT grind ginger and other
materials with hard fiber. This
may damage the grinding gears.
13.13. The unit should not run for more
than 10 minutes continuously. If
the meat grinder is needed for
more than 10 minutes, it must
be turned off to cool down the
motor for 10 minutes.
14.14. Operate the unit from “ON” to
“R” or from “R” to “ON” after the
previous working condition stops
for more than 30 seconds, or
it may cause some abnormal
movements such as moving up
and down that will easily destroy
the unit.
15.15. To avoid jamming, DO NOT force
or operate the unit with excessive
pressure.

IMPORTANT SAFEGUARDS
HOUSEHOLD USE ONLY • READ ALL INSTRUCTIONS BEFORE USE
16.16. When the circuit breaker
activates, DO NOT turn the unit
on.
17.17. NEVER try to replace the parts
and repair the unit by yourself.
Please contact GoWISE
Customer Care Team via email
[email protected]om or
phone [phone].
18.18. DO NOT operate this appliance
if the cord or plug is damaged.
Please contact GoWISE
Customer Care Team via email
[e-mail] or
phone [phone].
5
SAVE THESE
INSTRUCTIONS

6
PARTS
1. Hopper Plate
2. Lock Button
3. ON/OFF/R Switch
4. Body
5. Head Inlet
For Meat
6. Kibber A
7. Kibber B
8. Sausage
9. Cutting Plate (coarse)
10. Fixing Ring
11. Blade
12. Cutting Plate (medium)
13. Snake
14. Cutting Plate (fine)
15. Food Pusher
16. Grinding Head
PRODUCT STRUCTURE
17
19
20
21
22
18
For Vegetable
17. Shredding Pusher
18. Shredding Head
19. Shredding Fixing Ring
20. Slicing Cone
21. Coarse Hole Cone
22. Fine Hole Cone

PRODUCT STRUCTURE
7
5
8
2115
11
12
13
14
16
3
69
4
710

SET UP & INSTRUCTION
BEFORE FIRST USE
1.1. Remove all packaging materials,
stickers, and labels.
2.2. Check that voltage indicated on
the rating label corresponds the
mains voltage in your home.
3.3. Wash all parts (except body) in
warm soapy water.
4.4. Before plugging in the unit,
ensure the ON/OFF/R switch is in
“OFF” (O) position.
1.1. Press the lock button, hold the
grinding head and insert it into
the head inlet (when inserting,
pay attention to the head inlet,
the grinding head must be
slanted as per arrow indicated on
the top, see fig. 1), then move the
grinding head counterclockwise
to fasten the grinding head to
the head inlet. The grinding
head should be locked when it is
properly fastened into the head
inlet (fig. 2).
2.2. Place the snake into the grinding
head, long end first and turn to
feed the screw slightly until it is
set into the motor housing (fig. 3).
3.3. Place the cutting blade onto the
snake shaft with the blade facing
the front as illustrated (fig. 4). If
it is not fitted properly, the meat
will not be grinded.
CAUTION: SHARP BLADES.
HANDLE WITH CARE.
4.4. Place the desired cutting plate
next to the cutting blade, fitting
protrusions into the slots (fig. 5).
5.5. Support or press the center of
the cutting plate with one finger
then screw the fixing ring tight
with another hand (fig. 6).
DO NOT OVER TIGHTEN.
6.6. Place the hopper plate on the
grinding head and place it into
position (fig. 7).
7.7. Place the unit on a flat and stable
surface.
NOTE: The air passage at the
bottom and the side of the motor
housing should be kept free and
not blocked.
8
ASSEMBLING

ASSEMBLING
SET UP & INSTRUCTION
9
Figure 1. Figure 5.
Figure 2. Figure 6.
Figure 3.
Figure 7.
Figure 4.

10
SET UP & INSTRUCTION
MINCING MEAT REVERSE FUNCTION
1.1. Cut all ingredients into small
sized strips or cubes (no tendons,
boneless and fatless meat is
recommended) so that they fit
easily into the hopper opening.
2.2. Plug the unit on and press R/O/
ON switch to the “ON” position.
3.3. Feed ingredients into the hopper
plate. Use the food pusher to
push the ingredients into the
grinding head (fig. 8).
CAUTION: DO NOT USE YOUR
HANDS TO PUSH FOOD INTO
THE GRINDING HEAD.
4.4. Always switch the unit off and
unplug it from the power supply
when the unit is not in use.
1.1. If the grinder jams during the
grinding process, first switch off
the appliance by pressing R/O/
ON switch to “O” (OFF) position,
then press to “R” position.
2.2. The snake will be rotate in the
opposite direction, and the head
will get empty.
3.3. Once the jam looks clear, press
the R/O/ON switch to the “O”
(OFF) position first then press
“ON” to continue grinding.
NOTE: If it continues to jam or the
reverse function does not work,
turn the unit off and unplug the
unit.
4.4. Clean the parts by taking the
rings and snake apart.
Figure 8.

11
SET UP & INSTRUCTION
Preparation
You will need sausage casings
for making sausages. Be sure to
purchase sausage casings at your
local grocery store or butcher.
Prepare the sausage casing as
instructed on the package or by
your butcher. Most sausage casings
require soaking in water for at least
an hour.
While the sausage casings are
soaking, mince the meats you intend
to stuff into sausages. Mix and
season together in a bowl.
1.1. Before starting, assemble the
sausage attachment as per
shown in the diagram below
(fig. 9).
2.2. Thread the sausage casing to the
sausage attachment (fig. 10).
NOTE: Keep the sausage casing
as wet as possible to make
it easier to thread onto the
sausage attachment.
Figure 9.
Figure 10.
MAKING SAUSAGE
3.3. Once threaded, load the hopper
with the sausage meat and
press the R/O/ON switch to “ON”
until you see a bit of meat come
through the sausage attachment
then turn off the unit.
4.4. Pull a bit of the sausage casing
out and tie the end in a knot.
Thread the sausage casing
with the knot at the end of the
sausage attachment. This will
ensure a tight connection.
5.5. Press R/O/ON switch to “ON” to
turn on the unit and feed meat
into the grinding head using the
food pusher.
6.6. While the food is pushing out,
hold the sausage links up to
guide the sausage out to ensure
the stuffing is as tight as possible.
7.7. Once all the meat has been
pushed out, cut the end of the
sausage casings.
NOTE: Be sure to cut with a bit of
extra casing at the end.
8.8. Roll into sausages into a coil or
separate into sausage links.

12
SET UP & INSTRUCTION
MAKING KIBBE
Kibbe is a dish popular in Middle
Eastern cuisine. It is usually spiced
ground meat with a grain. (See recipe
book for a Kibbe recipe).
1.1. Once the meat has been minced
properly, disassemble by
reversing the steps from Figure
6-3 (pg. 9) to remove the cutting
plate and cutting blade.
2.2. Place kibbe attachments A and
B onto the feed screw shaft
together, fitting protrusions in the
slots (fig. 11).
3.3. Screw fixing ring into place until
tight (fig. 12). DO NOT OVER
TIGHTEN.
4.4. Press R/O/ON switch to “ON” to
turn on the unit and meat will
start to come out of the kibbe
attachment.
Figure 11.
Figure 12.
Figure 13.

13
SET UP & INSTRUCTION
ASSEMBLING THE VEGETABLE SLICER
Figure 15.
Figure 16.
Figure 14.
Figure 17.
Figure 18.
1.1. Place the unit on a flat and even
surface.
2.2. Press the lock button and hold
the vegetable shredding head
and insert it into the inlet at an
angle (fig. 14).
3.3. Turn the vegetable shredding
head counterclockwise to fasten
the head into place (fig. 15).
4.4. Insert the desired grating or
shredding cone (fig. 16).
5.5. Fasten the shredding fixing ring
to keep the cone in place (fig. 17).
6.6. Press the ON/O/R switch to
the “ON” position to turn on the
grind er.
7.7. Feed vegetable into the
shredding head and push it down
using the shredding pusher
(fig. 18).
CAUTION: DO NOT USE YOUR
HANDS TO PUSH FOOD INTO
THE SHREDDING HEAD.
8.8. Once all ingredients have been
shredded, press the ON/O/R
switch to the “O” position to turn
off the grinder. Unplug the unit.

14
CLEANING & MAINTENANCE
DISASSEMBLING
1.1. Make sure that the motor has
turned off completely.
2.2. Unplug the unit from the power
outlet.
3.3. Disassemble the unit by reversing
the steps from Figure 1-6 on
Page 9.
4.4. To remove the cutting plate
easily, place a screwdriver
between the cutting plate and
the head as illustrated and lift it
up (fig. 19).
5.5. Press the lock button, move the
head clockwise as illustrated on
fig. 20, then you can take out the
head.
Figure 19.
Figure 20.

15
CLEANING & MAINTENANCE
CLEANING
1.1. Remove meat, etc. Wash each
part in warm soapy water.
2.2. Wipe all the cutting parts with
vegetable oil-wet cloth.
3.3. DO NOT immerse the motor
housing in water, but only wipe it
with a damp cloth.
NOTES:
• The removable parts are NOT
dishwasher safe.
• Coat cutting parts with oil, such
as olive oil or vegetable oil, to
prevent rusting.
• A bleaching solution containing
chlorine will discolor aluminum
surfaces.
• Thinners and petrol will crack or
change the color of the unit.
To order replacement parts please
contact our Customer Care Team.
855-233-9199
[e-mail]
Live Chat at gowiseusa.com
M-F 8:30am - 4:00pm MST

WARRANTY
GoWISE USA warrants all products against defects in materials and
workmanship for one (1) year effective from the date of purchase.
GoWISE USA will replace any products that are found to be defective
due to manufacturer flaws based on eligibility. Refunds issued by
GoWISE USA must be purchased directly from GoWISE USA and are
only available to the original purchaser within the first 30 days. We do
not issue refunds for items bought by thirdparty retailers.
This warranty extends only to personal use and does not extend to
products that has been used for commercial, rental or any other use
this product was not intended for. There are no warranties other than
the warranties expressly set forth with each product.
This warranty is non-transferrable. GoWISE USA is not responsible
in any way for any damages, losses, or inconveniences caused by
equipment failure by user negligence, abuse, or use noncompliant with
the user manual or any additional safety, use, or warnings included in
the product packaging and manual.
This warranty only covers purchases within the 48 contiguous states
of United States of America. For purchases made outside the 48
contiguous states, such as AK, HI, PR, or Canada, we will replace the unit
under the one-year warranty upon receipt of a proven defect by video
or picture. However, the replacement will only ship to a freight forwarder
or address within the 48 contiguous United States. The consumer is
responsible for arranging shipment outside of the 48 contiguous states.
GoWISE USA assumes no liability for damage caused using this product
other than for its intended use or as instructed in the user manual.
Some states do not allow this exclusion or limitation of incidental or
consequential losses, so the foregoing disclaimer may not apply to you.
This warranty gives you specific legal rights and you may also have
other rights which may vary from state to state.
ALL EXPRESSED AND IMPLIED WARRANTIES INCLUDING THE
WARRANTY OF MERCHATIBILITY, ARE LIMITED TO THE PERIOD OF
THE LIMITED WARRANTY.
NOTE: General Warranty excludes refurbished / auction items.
16

WARRANTY
Additional 60-Days Warranty
You can extend your 1-year warranty by an additional 60 days. Log onto
www.gowiseproducts.com/apps/ product-registration and register
your product within the first 14 days of your purchase for the extended
warranty.
DEFECTIVE PRODUCTS & RETURNS
If your product is defective within the 1-year warranty period, please
email our Customer Care Team at suppor[email protected]. To expedite
your issue, please provide the 4 items below:
1.1. Copy of the invoice, order information, or gift receipt showing the
date of purchase
2.2. Serial number, usually found on a sticker located on the bottom
on back of the unit
3.3. Picture or video of the issue or defect that you are experiencing
4.4. Shipping address information
Authorized Retailers:
Amazon
GoWISE USA
WayFair
Houzz
Home Depot
etailz
MorningSave.com
Bed Bath & Beyond
Jet.com
Walmart.com
Macy’s
17

18
NOTES

19
NOTES

•To ensure the correct use of
this appliance, read these
instructions carefully and
thoroughly.
•Please keep this manual for
future reference.
•Thank you for purchasing this
GoWISE USA Electric Meat
Grinder & Food Processor.
WWW.GOWISEUSA.COM
855-233-9199
[e-mail]
Live Chat at gowiseusa.com
M-F 8:30am - 4:00pm MST