GPM York RADYORXLGY User manual

GLOBAL PROCUREMENT AND MARKETING LIMITED
1
COADURWHTCOADURWHT
Dimensions
No. people
Assembly Time
SKU #
Width: 172 cm
30 mins
(approx.)
Depth: 19 cm
Height: 81.5 cm
RADYORXLGY RADYORXLWT
York Extra Large Radiator Cover
Important
PLEASE READ THESE INSTRUCTIONS FULLY BEFORE STARTING ASSEMBLY
PLEASE DO NOT THROW THE PACKAGING AWAY UNTIL YOU ARE SATISFIED WITH PURCHASE,
GOODS NEED TO BE RETURNED IN ORIGINAL PACKAGING.
If you need help or have damaged or missing parts, please email [email protected]
RADYORXLGY
RADYORXLWT
2
7
1

2
•Check you have all the
components and tools listed
on pages 4 and 5.
•Remove all fittings from the
plastic bags and separate
them into their groups.
•Keep children and animals
away from the work area,
small parts could choke if
swallowed.
•Make sure you have enough
space to lay out the parts
before starting.
•Do not stand or put weight on
the product, this could cause
damage.
•Assemble the item as close to
its final position (in the same
room) as possible.
•Assemble on a soft, level
surface to avoid damaging the
unit or your floor.
•We do not recommend the
use of power
drill/drivers for
inserting screws,
as this could
damage the unit.
Only use hand screwdrivers.
•Dispose of all packaging
carefully and responsibly.
If you are unhappy with the product and wish to return it,
please follow the retailer’s returns procedure.
Safety and Care Advice
Important
PLEASE READ THESE INSTRUCTIONS FULLY BEFORE STARTING ASSEMBLY
PLEASE DO NOT THROW THE PACKAGING AWAY UNTIL YOU ARE SATISFIED WITH PURCHASE,
GOODS NEED TO BE RETURNED IN ORIGINAL PACKAGING.
Care and Maintenance
Only clean using a damp cloth and
mild detergent, do not use bleach or
abrasive cleaners.
From time to time check that there
are no loose screws on this unit.
This product should not be
discarded with household waste.
Take to your local authority waste
disposal centre.
If kept outside please ensure in the winter months that the product is correctly covered or put away into a dry
environment to prevent corrosion, weathering or damage.
If your product is not designed to be outside, we recommend that it is always kept indoors in a dry environment.
•••

3
Exploded View
If you have damaged or missing components,
email: [email protected].uk
Components - Panels
Please check that you have all the components listed below before constructing your item.
Part No Description Qty
Size
(mm)
Thickness
(mm)
1
LEFT PANEL
1 12
12
12
5
12
12
12
808x112
808x112
12808x112
655x105
808x168
808x168
860x190
837x38
2
RIGHT PANEL
3CENTRAL PANEL
1
1
4
16
1
1
1
1
4 TOP RAIL AND BOTTOM RAIL
5 SLITS
6 RIGHT LEG
7
8
LEFT LEG
LEFT TOP PANEL
12860x190
9RIGHT TOP PANEL
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, please email aftersal[email protected].uk

4
Components - Fixings
Please check that you have all the components listed below before constructing your item.
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings
may be supplied than are required.
Tools Required
Ruler – Use this to measure your screws (mm)
Important
– Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, please email aftersal[email protected].uk
If you have damaged or missing components,
email: [email protected].uk

5
Assembly Instructions If you have damaged or missing components,
email: [email protected].uk

6

7

8

9