GPM Oakmere STVOAK2TR User manual

GLOBAL PROCUREMENT AND MARKETING LIMITED
Assembly Instructions - Please keep for future reference
No. people Assembly Time SKU #
Important - Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, please email [email protected]
Dimensions
Width: 120m
Depth: 40cm
Height: 50cm
30 mins
(approx.)
1
STVOAK2TR
For purchasing this
GPM Limited
product
120cm
50cm
22.2cm
22.5cm
STVOAK2TR
Media Unit
40cm

Check you have all the
components and tools listed
on pages 4 and 5.
Remove all fittings from the
plastic bags and separate
them into their groups.
Keep children and animals
away from the work area,
small parts could choke if
swallowed.
Make sure you have enough
space to lay out the parts
before starting.
Do not stand or put weight on
the product, this could cause
damage.
Assemble the item as close to
its final position (in the same
room) as possible.
Assemble on a soft, level
surface to avoid damaging the
unit or your floor.
We do not recommend the
use of power
drill/drivers for
inserting screws,
as this could
damage the unit.
Only use hand screwdrivers.
Dispose of all packaging
carefully and responsibly.
Care and Maintenance
Only clean using a damp cloth and
mild detergent, do not use bleach or
abrasive cleaners.
From time to time check that there
are no loose screws on this unit.
This product should not be discarded
with household waste. Take to your
local authority waste disposal centre.
If you are unhappy with the product and wish to return it,
please follow the retailer's returns procedure.
2
Safety and Care Advice
Important - Please read these instructions fully before starting assembly

Exploded View If you have damaged or missing components,
email: [email protected]
3

Components - Fixings
(A)
Tools Required
Ruler - Use this to measure your screws (mm)
Important - Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, please email [email protected]
(B) (C)
Please check that you have all the components listed below before constructing your item.
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings
may be supplied than are required.
5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170
0
If you have damaged or missing components,
email: [email protected]
4
12pcs 1pc 18pcs

Assembly Instructions If you have damaged or missing components,
email: [email protected]
Step 1
5
Step 2
x3
B