Gracious Home GH3024DR-WH User manual

Gracious Home 5 Drawer Closet
ASSEMBLY INSTRUCTIONS
WARNING!
Children have died from furniture tip over. To reduce the risk of furniture tip over:
ALWAYS install anti-tipping hardware that is provided.
NEVER allow children to stand, climb or hang on drawers, doors, or shelves.
NEVER overload shelves or drawers – evenly distribute the weight.
These assembly instructions are only applicable for the 5-drawer closet.
General Instructions:
Thank you for purchasing a Gracious Home product. You are now the proud owner of a high quality product designed to face the test of daily use and
guaranteeing your enjoyment for many years to come.
Carefully read the instructions before starting the installation.
During assembly. please follow all generally accepted safety procedures.
Failure to adhere to the following instructions will invalidate the manufacturer warranty. The manufacturer will decline any responsibility for any
damages caused. Any installation which does not correspond to the instructions may result in defects. malfunctioning parts. significant damage and/or
injury.
If you are missing any parts, please contact Customer Care department immediately .
Important:
Weight Capacity - Overall Unit 100 lbs. Each
drawer has a maximum weight capacity of 75 lbs.
The hanging rod has a capacity of 30 lbs.
Tools Required: Phillips Screwdriver Tools Required: Electric Drill Tools Required: Rubber Mallet



Hardware Bag
a b
c
d
f
i j k l m
'r T I i]·,  J
f1'  '

     



 


Cabinet Parts Detail G
K
4
NO.
QTY
A
ITEM
Right Side Panel
1
,o/
BBack Rail
Left Side Panel
1
D
1
E
Bottom Panel
Shelf
1
F
1
G
1
H
1
J
Back Panel
Top Panel
Toe Kick
Front Rail
1
L
Hanging Rod
1

C
3
e
g h
n




� 


After unpacking, place the panels on a soft surface.
1. Screw the hardware onto the side plate with an electric drill.
a
c
Q30
Q 20
C
Q5
Q2
A
. • ' /  5 
:,.   

\

gn



2. Install the wooden dowels on the top panel, bottom panel,
back rail, shelf, front rail and toe kick with the rubber mallet.
Connect with the right side panel.
Tighten it with a screwdriver.
Insert the back panel.

b
Q15



f
I
Qty18



3. Fasten the left side panel with a screwdriver
b
e
Q15 Q30
C
