Graco Nautilus 2.0 User manual

www.gracobaby.com
3 - in - 1 Forward - Facing Harness Booster
Do not install or use this
child restraint until you
read and understand
the instructions in this
manual.
FAILURE TO PROPERLY
USE THIS CHILD
RESTRAINT INCREASES
THE RISK OF SERIOUS
INJURY OR DEATH IN A
SUDDEN STOP OR CRASH.
Scan the
code or visit
gracobaby.com
to view
installation
videos.
Nautilus® 2.0
NWL0001404388B 9/22
Read This Instruction Manual

2
1-A Welcome to the Graco Family
If You Need Help
Car Seat Assembly
Install Cup Holders
Register This Child Restraint
1-B Safety Warnings
1-C Right Mode of Use
1-D Aircraft Installation
1 Important Pages 5-15
2 Features Pages 16-19

3
3-A Forward-Facing Use
3-B Install Forward-Facing with LATCH
3-C Install Forward-Facing with the Vehicle Seat Belt
3 Forward-Facing Pages 20-28
4-A Securing Child 5-Point Harness
4 Securing Child Pages 29-35
5-A Booster Use
5-B Install Highback Booster
5-C Install Backless Booster
5-D Securing Child Highback Booster
5-E Securing Child Backless Booster
5 Booster Pages 36-56

Important
1
4
6-A How to Uninstall Lower Anchor Connectors and Tether
6-B Which Installion Method Should I use?
6-C Choosing Vehicle Seat Location
6-D Unsafe Vehicle Seat Location
6-E Vehicle Seat Belts
7-A Cleaning Seat Pad
7-B Cleaning Buckle
7-C Cleaning Harness, Lower Anchor Attachment and Tether
6 Additional Information Pages 57-63
7 Care & Cleaning Pages 64-70

Important
1
5
1-A Welcome to the Graco Family!
Your child’s safety depends on you. No car seat can guarantee protection from
injury in every situation, but proper use helps reduce the risk of serious injury or
death. READ THIS MANUAL CAREFULLY.
This child restraint meets or exceeds all applicable requirements of Federal motor
vehicle safety standard 213 for use in motor vehicles.
Even if this car seat seems easy to figure out on your own, you must follow the
detailed instructions in this instruction manual to ensure the steps below are
performed correctly.
In the U.S.A, please contact our Customer Service Department with any questions
you may have concerning parts, use, or maintenance. When you contact us, please
have your product’s model number and date of manufacture ready so that we may
help you efficiently. These numbers can be found on a sticker on the bottom of your
car seat.
Contact us at www.gracobaby.com or call 1-800-345-4109.
For additional resources or to get your car seat checked by a child passenger safety
technician, please visit the following web sites:
www.nhtsa.gov • www.seatcheck.org • www.safekids.org
If You Need Help

Important
1
Important
1
6
This car seat is for children: Forward-Facing: 22-65 lb (10-30 kg)
Highback Booster: 40-100 lb (18.1-45 kg)
Backless Booster: 40-120 lb (18.1-54 kg)
Adult Assembly Required
From the back of the seat, undo the two elastic
loops.
From the front of the seat, undo the two snaps
near the seat crease.
Pull the seat pad fabric in the sitting area to
expose the gutters.
Make Sure all hands, fingers and other objects
are clear of the gutters.
Car Seat Assembly (On Select Models)
(Follow the directions that matches your model)

Important
1
Important
1
7
Harness
Strap
T-Slot
Arm
Make Sure the harness straps are securely
attached within the “T”-shaped slots around the
arms as shown.
With your other hand, raise seat back so
that both arms LOCK into the gutters. Arms
should CLICK into the gutters. Reattach the
snaps near the seat crease and the loops on the
back of the seat.
Slide the lower backrest into the
base until it CLICKS into place.
Click!

Important
1
Important
1
8
Cup holders MUST be installed.
Place the tab on the cupholder into the
corresponding slot on the base and rotate the cup
up and into position as shown. You will hear a
“CLICK” when they are secured in place.
Note: you may find it easier to install the cup
holders with the snaps on the back of the seat
undone.
Install Cup Holders (Adult Assembly Required)

Important
1
Important
1
9
Please fill out the prepaid registration postcard attached to the harness and mail it in
today or register online at www.gracobaby.com/carseatregistration.
Child restraints could be recalled for safety reasons. You must register this restraint
to be reached in a recall. Send your name, address, and the restraint’s model number
and manufacturing date to:
Graco Children’s Products, Inc.
Attn: Customer Service
P.O. Box 169, Elverson, PA 19520-9901
or call 1-800-345-4109
or register online at www.gracobaby.com/carseatregistration
For recall information, call the U.S. Government’s Vehicle Safety Hotline at
1-888-327-4236 (TTY: 1–800–424–9153), or go to http://www.NHTSA.gov
For future reference or if you change addresses, record the model name, model
number, date of manufacture and purchase date of this car seat on the below. You
can find this information either on the registration card if you still have it or on the
date label located on the bottom of the car seat.
Register This Child Restraint
Model Name_________________________
Model Number _______________________
Date of Manufacture __________________
Date of Purchase _____________________

Important
1
Important
1
10
Failure to follow these instructions and child restraint’s labels can result
in child striking the vehicle’s interior during a sudden stop or crash.
! According to accident statistics, children are
safer when properly restrained in the rear
seating positions than in the front seating
positions. The center of the back seat can be
the safest during a possible side impact.
! Review your vehicle owner’s manual for more information about air
bags and car seat use.
! If your vehicle does not have a back seat, review your vehicle owner’s
manual.
! Select a suitable location for the car seat in your vehicle.
! When forward-facing, children should use the built-in harness system
for as long as possible until they reach the maximum forward-facing
weight or height for their car seat. At that point, children should ride in
a belt-positioning booster seat. A booster is no longer needed once the
1-B Safety Warnings