Graco Husky 1040 Operation manual

Instructions – Parts List
GRACO INC.ąP.O. BOX 1441ąMINNEAPOLIS, MNą55440-1441
Copyright 1997, Graco Inc. is registered to I.S. EN ISO 9001
Huskyt1040 Air–Operated
Diaphragm Pumps
120 psi (0.8 MPa, 8 bar) Maximum Fluid Working Pressure
120 psi (0.8 MPa, 8 bar) Maximum Air Input Pressure
Model No. 240623, Series C
With BSP manifolds and Tri-Clamp adapters
Model No. 240624, Series C
With bare BSP manifolds
Patent No.
CN ZL94102643.4
EU 0942171
US 5,368,452
AR AR006617B1
JA 3517270
308788 Rev.M
Important Safety Instructions
Read all warnings and instructions in this
manual and in instruction manual 308479
(supplied). Save these instructions.
7447C
Model No. 240623 shown

2 308788
Parts Drawing
Husky 1040 Model No. 240623, Series C
With BSP manifolds and Tri-Clamp adapters
Husky 1040 Model No. 240624, Series C
With bare BSP manifolds
1
2
3
4{
5
6{
7{
8
9{
10{
11
12
15
16
17{
{18
19
20
22
23
24
25
101
102
103
104
105
110Y
201*
202*
301*
401*
*402
403*
3
16
{17
11 {10
106
106
202*
107
108*
106
114
7461D
26
28
27
29
115 F
116 F
115 F
116 F202*
201*
301*
202*
117

308788 3
Parts List
Husky 1040 Model No. 240623, Series C
With BSP manifolds and Tri-Clamp adapters
Husky 1040 Model No. 240624, Series C
With bare BSP manifolds
Ref.
No. Part No. Description Qty
1 188838 HOUSING, center; alum. 1
2 188854 COVER, air valve; alum. 1
3 116344 SCREW, mach, hex flange hd;
M5 x 0.8; 12 mm (0.47 in.)
9
4{188618 GASKET, cover; SantopreneR1
5 188855 CARRIAGE; aluminum 1
6{108730 O-RING; nitrile 1
7{188616 BLOCK, air valve; acetal 1
8 188615 PLATE, air valve; sst 1
9{188617 SEAL, valve plate; buna-N 1
10{112181 PACKING, u-cup; nitrile 2
11 188612 PISTON, actuator; acetal 2
12 188613 BEARING, piston; acetal 2
15 188611 BEARING, pin; acetal 2
16 188610 PIN, pilot; stainless steel 2
17{157628 O-RING; buna-N 2
18{188614 BLOCK, pilot; acetal 1
19 188609 BEARING, shaft; acetal 2
20 116343 SCREW, grounding 1
22 188603 GASKET, air cover; foam 2
23 188839 COVER, air; aluminum 2
24 188608 SHAFT, diaphragm; sst 1
25 115643 SCREW; M8 x 25;
25 mm (1 in.)
12
26 290045 PLATE, designation 1
27 188620 LABEL, identification 2
28 111183 RIVET 2
29 189989 LABEL, CE 1
Ref.
No. Part No. Description Qty
101 188860 COVER, fluid; sst 2
102 193421 MANIFOLD, inlet, BSP thread;
sst
1
103 193419 MANIFOLD, outlet, BSP
thread; sst
1
104 188607 PLATE, air side; aluminum 2
105 188960 PLATE, fluid side; sst 2
106 112178 SCREW; M8 x 1.25;
25 mm (1 in.)
24
107 189044 BOLT; M12 x 1.75;
35 mm (1.38 in.); sst
2
108* 104319 O-RING; PTFE 2
110Y188621 LABEL, warning 1
114 112257 NUT, hex; M8 x 1.25; sst 8
115F193427 ADAPTER, Tri-Clamp; 1.5 in.
Model 240623 only
2
116F193422 GASKET; PTFE
Model 240623 only
2
117 115459 SPRING, compression 2
201* 188707 SEAT; 316 stainless steel 4
202* 109205 O-RING; PTFE 8
301* 112088 BALL; PTFE 4
401* 188606 DIAPHRAGM; HytrelR2
402* 112181 PACKING, u-cup; nitrile 2
403* 188605 DIAPHRAGM; PTFE 2
* These parts are included in the Pump Repair Kit, which
may be purchased separately. See the Repair Kit
Matrix in instruction manual 308479 to determine the
correct kit for your pump.
{These parts are included in Air Valve Repair Kit 236273,
which may be purchased separately.
FSupplied with Model 240623 only.
YReplacement Danger and Warning labels, tags, and
cards are available at no cost.
HytrelRis a registered trademark of the DuPont Company.
SantopreneRis a registered trademark of the Monsanto Co.

4 308788
Technical Data
See manual 308479 (supplied) for Technical Data and Performance Charts. For wetted parts, see Parts List on
page 3.
Graco Warranties
Graco Standard Husky Pump Warranty
Graco warrants all equipment manufactured by Graco and bearing its name to be free from defects in material and workmanship on the
date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco,
Graco will, for a period of five years from the date of sale, repair or replace any part of the equipment determined by Graco to be
defective. This warranty applies only when the equipment is installed, operated and maintained in accordance with Graco’s written
recommendations.
This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by
faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or
substitution of non-Graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of
Graco equipment with structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture,
installation, operation or maintenance of structures, accessories, equipment or materials not supplied by Graco.
This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for
verification of the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The
equipment will be returned to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect
in material or workmanship, repairs will be made at a reasonable charge, which charges may include the costs of parts, labor, and
transportation.
THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT
NOT LIMITED TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.
Graco’s sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other
remedy (including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any
other incidental or consequential loss) shall be available. Any action for breach of warranty must be brought within six years of the date
of sale.
Graco makes no warranty, and disclaims all implied warranties of merchantability and fitness for a particular purpose in connection
with accessories, equipment, materials or components sold but not manufactured by Graco. These items sold, but not manufactured
by Graco (such as electric motors, switches, hose, etc.), are subject to the warranty, if any, of their manufacturer. Graco will provide
purchaser with reasonable assistance in making any claim for breach of these warranties.
In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equipment
hereunder, or the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract,
breach of warranty, the negligence of Graco, or otherwise.
FOR GRACO CANADA CUSTOMERS
The parties acknowledge that they have required that the present document, as well as all documents, notices and legal proceedings
entered into, given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in English. Les parties
reconnaissent avoir convenu que la rédaction du présente document sera en Anglais, ainsi que tous documents, avis et procédures
judiciaires exécutés, donnés ou intentés à la suite de ou en rapport, directement ou indirectement, avec les procedures concernées.
Extended Product Warranty
Graco warrants all Husky 205, 307, 515, 716, 1040, 1590, 2150, and 3275 air valve center sections to be free from defects in material
and workmanship for a period of fifteen years from date installed in service by the original purchaser. Normal wear of items such as
packings or seals are not considered to be defects in material and workmanship.
Five years Graco will provide parts and labor.
Six to Fifteen years Graco will replace defective parts only.
Graco Information
TO PLACE AN ORDER, contact your Graco distributor, or call one of the following numbers
to identify the distributor closest to you:
1–800–328–0211 Toll Free
612–623–6921
612–378–3505 Fax
All written and visual data contained in this document reflect the latest product information available at the time of publication.
Graco reserves the right to make changes at any time without notice.
MM 308788
Graco Headquarters: Minneapolis
International Offices: Belgium, China, Japan, Korea
www.graco.com
PRINTED IN USA 308788 06/1997, Revised 04/2005