Graco Husky 3300e Instruction Manual

Operation
Husky™ Husky™
Husky™3300e 3300e 3300e
Electric Electric
Electric- - -Operated Operated OperatedDiaphragm Diaphragm DiaphragmPump Pump Pump3A7036E 3A7036E
3A7036E
EN EN
EN
3 3
3- - -Inch Inch Inchpumps pumps pumpswith with withelectric electric electricdrive drive drivefor for for󰘱uid 󰘱uid 󰘱uidtransfer transfer transferapplications. applications. applications.Not Not Notapproved approved approvedfor for foruse use usein in inexplosive explosive explosive
atmospheres atmospheres
atmospheresor or orhazardous hazardous hazardous(classi󰘰ed) (classi󰘰ed) (classi󰘰ed)locations locations locationsunless unless unlessotherwise otherwise otherwisestated. stated. stated.For For Forprofessional professional professionaluse use useonly. only. only.
Important Important
ImportantSafety Safety SafetyInstructions Instructions Instructions
Readallwarningsandinstructionsinthismanualandinyour
Repair/Partsmanual.Save Save
Saveall all allinstructions. instructions. instructions.
MaximumWorkingPressure:80psi
(0.55MPa,5.5bar)
PROVENQUALITY.LEADINGTECHNOLOGY.

Contents Contents
Contents
Related Related
RelatedManuals Manuals Manuals. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .2 2 2
Warnings Warnings
Warnings. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .3 3 3
Con󰘰guration Con󰘰guration
Con󰘰gurationNumber Number NumberMatrix Matrix Matrix. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .6 6 6
Ordering Ordering
OrderingInformation Information Information. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .8 8 8
Installation Installation
Installation. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .9 9 9
General General
GeneralInformation Information Information. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .9 9 9
Tighten Tighten
TightenFasteners Fasteners Fasteners. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .9 9 9
Tips Tips
Tipsto to toReduce Reduce ReduceCavitation Cavitation Cavitation. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .9 9 9
Mount Mount
Mountthe the thePump Pump Pump. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .12 12 12
Ground Ground
GroundThe The TheSystem System System. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .13 13 13
Air Air
AirLine Line Line. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .14 14 14
Fluid Fluid
FluidSupply Supply SupplyLine Line Line. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .14 14 14
Fluid Fluid
FluidOutlet Outlet OutletLine Line Line. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .14 14 14
Electrical Electrical
ElectricalConnections Connections Connections. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .15 15 15
Operation Operation
Operation. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .18 18 18
Tighten Tighten
TightenFasteners Fasteners Fasteners. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .18 18 18
Initial Initial
InitialCon󰘰guration Con󰘰guration Con󰘰guration(AC (AC (ACwith with withVFD) VFD) VFD). . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .18 18 18
Flush Flush
Flushthe the thePump Pump PumpBefore Before BeforeFirst First FirstUse Use Use. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .18 18 18
Start Start
Startand and andAdjust Adjust Adjustthe the thePump Pump Pump. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .18 18 18
Pressure Pressure
PressureRelief Relief ReliefProcedure Procedure Procedure. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .19 19 19
Pump Pump
PumpShutdown Shutdown Shutdown. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .19 19 19
VFD VFD
VFDOperation Operation Operation. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .20 20 20
VFD VFD
VFDControl Control ControlPanel Panel Panel. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .20 20 20
Adjust Adjust
Adjustthe the theSpeed Speed Speed. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .20 20 20
Maintenance Maintenance
Maintenance. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .21 21 21
Maintenance Maintenance
MaintenanceSchedule Schedule Schedule. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .21 21 21
Lubrication Lubrication
Lubrication. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .21 21 21
Tighten Tighten
TightenThreaded Threaded ThreadedConnections Connections Connections. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .21 21 21
Flushing Flushing
Flushingand and andStorage Storage Storage. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .21 21 21
Torque Torque
TorqueInstructions Instructions Instructions. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .22 22 22
Torque Torque
Torquesequence sequence sequence. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .22 22 22
Performance Performance
PerformanceCharts Charts Charts. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .24 24 24
Dimensions Dimensions
Dimensions. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .26 26 26
Technical Technical
TechnicalData Data Data. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .35 35 35
Graco Graco
GracoStandard Standard StandardHusky Husky HuskyPump Pump PumpWarranty Warranty Warranty. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .38 38 38
Related Related
RelatedManuals Manuals Manuals
Manual Manual
ManualNumber Number NumberTitle Title Title
3A7037 3A7037
3A7037Husky™ Husky™ Husky™3300e 3300e 3300eElectric Electric Electric- - -Operated Operated OperatedDiaphragm Diaphragm DiaphragmPump, Pump, Pump,Repair/Parts Repair/Parts Repair/Parts
23A7036E

Warnings
Warnings Warnings
Warnings
Thefollowingwarningsareforthesetup,use,grounding,maintenance,andrepairofthisequipment.The
exclamationpointsymbolalertsyoutoageneralwarningandthehazardsymbolsrefertoprocedure-speci󰘰c
risks.Whenthesesymbolsappearinthebodyofthismanualoronwarninglabels,referbacktothese
Warnings.Product-speci󰘰chazardsymbolsandwarningsnotcoveredinthissectionmayappearthroughout
thebodyofthismanualwhereapplicable.
DANGER
SEVERE SEVERE
SEVEREELECTRIC ELECTRIC ELECTRICSHOCK SHOCK SHOCKHAZARD HAZARD HAZARD
Thisequipmentcanbepoweredbymorethan240V.Contactwiththisvoltagewill
causedeathorseriousinjury.
•Turnoffanddisconnectpoweratmainswitchbeforedisconnectinganycablesand
beforeservicingequipment.
•Thisequipmentmustbegrounded.Connectonlytogroundedpowersource.
•Allelectricalwiringmustbedonebyaquali󰘰edelectricianandcomplywithalllocal
codesandregulations.
WARNING
FIRE FIRE
FIREAND AND ANDEXPLOSION EXPLOSION EXPLOSIONHAZARD HAZARD HAZARD
Flammablefumes,suchassolventandpaintfumes,inwork work
workarea area areacanigniteorexplode.Paint
orsolvent󰘱owingthroughtheequipmentcancausestaticsparking.Tohelpprevent󰘰reand
explosion:
•Useequipmentonlyinwellventilatedarea.
•Eliminateallignitionsources;suchaspilotlights,cigarettes,portableelectriclamps,and
plasticdropcloths(potentialstaticarc).
•Groundallequipmentintheworkarea.SeeGrounding Grounding
Groundinginstructions.
•Keepworkareafreeofdebris,includingsolvent,ragsandgasoline.
•Donotplugorunplugpowercords,orturnpowerorlightswitchesonoroffwhen󰘱ammable
fumesarepresent.
•Useonlygroundedhoses.
•Stop Stop
Stopoperation operation operationimmediately immediately immediatelyifstaticsparkingoccursoryoufeelashock. . .Donotuse
equipmentuntilyouidentifyandcorrecttheproblem.
•Keepaworking󰘰reextinguisherintheworkarea.
Staticchargemaybuilduponplasticpartsduringcleaningandcoulddischargeandignite
󰘱ammablevapors.Tohelpprevent󰘰reandexplosion:
•Cleanplasticpartsonlyinwellventilatedarea.
•Donotcleanwithadrycloth.
•Donotoperateelectrostaticgunsinequipmentworkarea.
3A7036E3

Warnings
WARNING
PRESSURIZED PRESSURIZED
PRESSURIZEDEQUIPMENT EQUIPMENT EQUIPMENTHAZARD HAZARD HAZARD
Fluidfromtheequipment,leaks,orrupturedcomponentscansplashintheeyesoronskin
andcauseseriousinjury.
•FollowthePressure Pressure
PressureRelief Relief ReliefProcedure Procedure Procedurewhenyoustopspraying/dispensingandbefore
cleaning,checking,orservicingequipment.
•Tightenall󰘱uidconnectionsbeforeoperatingtheequipment.
•Checkhoses,tubes,andcouplingsdaily.Replacewornordamagedpartsimmediately.
EQUIPMENT EQUIPMENT
EQUIPMENTMISUSE MISUSE MISUSEHAZARD HAZARD HAZARD
Misusecancausedeathorseriousinjury.
•Donotoperatetheunitwhenfatiguedorunderthein󰘱uenceofdrugsoralcohol.
•Donotexceedthemaximumworkingpressureortemperatureratingofthelowestrated
systemcomponent.SeeTechnical Technical
TechnicalData Data Datainallequipmentmanuals.
•Use󰘱uidsandsolventsthatarecompatiblewithequipmentwettedparts.SeeTechnical Technical
TechnicalData Data Data
inallequipmentmanuals.Read󰘱uidandsolventmanufacturer’swarnings.Forcomplete
informationaboutyourmaterial,requestSafetyDataSheet(SDS)fromdistributororretailer.
•TurnoffallequipmentandfollowthePressure Pressure
PressureRelief Relief ReliefProcedure Procedure Procedurewhenequipmentisnotinuse.
•Checkequipmentdaily.Repairorreplacewornordamagedpartsimmediatelywithgenuine
manufacturer’sreplacementpartsonly.
•Donotalterormodifyequipment.Alterationsormodi󰘰cationsmayvoidagencyapprovals
andcreatesafetyhazards.
•Makesureallequipmentisratedandapprovedfortheenvironmentinwhichyouareusingit.
•Useequipmentonlyforitsintendedpurpose.Callyourdistributorforinformation.
•Routehosesandcablesawayfromtraf󰘰careas,sharpedges,movingparts,andhotsurfaces.
•Donotkinkoroverbendhosesorusehosestopullequipment.
•Keepchildrenandanimalsawayfromworkarea.
•Complywithallapplicablesafetyregulations.
PRESSURIZED PRESSURIZED
PRESSURIZEDALUMINUM ALUMINUM ALUMINUMPARTS PARTS PARTSHAZARD HAZARD HAZARD
Useof󰘱uidsthatareincompatiblewithaluminuminpressurizedequipmentcancauseserious
chemicalreactionandequipmentrupture.Failuretofollowthiswarningcanresultindeath,
seriousinjury,orpropertydamage.
•Donotuse1,1,1-trichloroethane,methylenechloride,otherhalogenatedhydrocarbon
solventsor󰘱uidscontainingsuchsolvents.
•Donotusechlorinebleach.
•Manyother󰘱uidsmaycontainchemicalsthatcanreactwithaluminum.Contactyourmaterial
supplierforcompatibility.
43A7036E

Warnings
WARNING
THERMAL THERMAL
THERMALEXPANSION EXPANSION EXPANSIONHAZARD HAZARD HAZARD
Fluidssubjectedtoheatincon󰘰nedspaces,includinghoses,cancreatearapidriseinpressure
duetothethermalexpansion.Over-pressurizationcanresultinequipmentruptureandserious
injury.
•Openavalvetorelievethe󰘱uidexpansionduringheating.
•Replacehosesproactivelyatregularintervalsbasedonyouroperatingconditions.
PLASTIC PLASTIC
PLASTICPARTS PARTS PARTSCLEANING CLEANING CLEANINGSOLVENT SOLVENT SOLVENTHAZARD HAZARD HAZARD
Manysolventscandegradeplasticpartsandcausethemtofail,whichcouldcauseserious
injuryorpropertydamage.
•Useonlycompatiblewater-basedsolventstocleanplasticstructuralorpressure-containing
parts.
•SeeTechnical Technical
TechnicalData Data Datainthisandallotherequipmentinstructionmanuals.Read󰘱uidand
solventmanufacturer’sSafetyDataSheet(SDS)andrecommendations.
TOXIC TOXIC
TOXICFLUID FLUID FLUIDOR OR ORFUMES FUMES FUMESHAZARD HAZARD HAZARD
Toxic󰘱uidsorfumescancauseseriousinjuryordeathifsplashedintheeyesoronskin,
inhaled,orswallowed.
•ReadSafetyDataSheet(SDS)toknowthespeci󰘰chazardsofthe󰘱uidsyouareusing.
•Storehazardous󰘱uidinapprovedcontainers,anddisposeofitaccordingtoapplicable
guidelines.
BURN BURN
BURNHAZARD HAZARD HAZARD
Equipmentsurfacesand󰘱uidthat’sheatedcanbecomeveryhotduringoperation.Toavoid
severeburns:
•Donottouchhot󰘱uidorequipment.
PERSONAL PERSONAL
PERSONALPROTECTIVE PROTECTIVE PROTECTIVEEQUIPMENT EQUIPMENT EQUIPMENT
Wearappropriateprotectiveequipmentwhenintheworkareatohelppreventseriousinjury,
includingeyeinjury,hearingloss,inhalationoftoxicfumes,andburns.Thisprotective
equipmentincludesbutisnotlimitedto:
•Protectiveeyewear,andhearingprotection.
•Respirators,protectiveclothing,andglovesasrecommendedbythe󰘱uidandsolvent
manufacturer.
3A7036E5

CongurationNumberMatrix
Con󰘰guration Con󰘰guration
Con󰘰gurationNumber Number NumberMatrix Matrix Matrix
Check Check
Checkthe the theidenti󰘰cation identi󰘰cation identi󰘰cationplate plate plate(ID) (ID) (ID)for for forthe the the
Con󰘰guration Con󰘰guration
Con󰘰gurationNumber Number Numberof of ofyour your yourpump. pump. pump.Use Use Usethe the the
following following
followingmatrix matrix matrixto to tode󰘰ne de󰘰ne de󰘰nethe the thecomponents components componentsof of ofyour your your
pump. pump.
pump.
Sample Sample
SampleCon󰘰guration Con󰘰guration Con󰘰gurationNumber: Number: Number:3300A 3300A
3300A- - -EA04AA1TPTPTP EA04AA1TPTPTP EA04AA1TPTPTP- - -- - -
3300 3300
3300A A
AE E EA A A04 04
04A A
AA1 A1
A1TP TP
TPTP TP TPTP TP TP- -
-- - -
Pump Pump
Pump
Model Model
Model
Wetted Wetted
Wetted
Section Section
Section
Material Material
Material
Drive Drive
DriveCenter Center
Center
Section Section
Section
Material Material
Material
Gear Gear
GearBox Box Box
and and
andCom- Com- Com-
pressor pressor
pressor
Motor Motor
MotorFluid Fluid
FluidCovers Covers Coversand and and
Manifolds Manifolds
Manifolds
Seats Seats
SeatsBalls Balls
BallsDiaphragms Diaphragms DiaphragmsManifold Manifold
Manifold
O O
O- - -Rings Rings Rings
NOTE: NOTE:
NOTE:Some Some Somecombinations combinations combinationsare are arenot not notpossible. possible. possible.Please Please Pleaserefer refer referto to toOrdering Ordering OrderingInformation Information Information, , ,page page page8 8 8. . .
Pump Pump
PumpWetted Wetted
WettedSection Section Section
Material Material
Material
Drive Drive
DriveType Type TypeCenter Center
CenterSection Section Section
Material Material
Material
Gearbox Gearbox
Gearboxand and and
Compressor Compressor
Compressor
Motor Motor
Motor
3300 3300
3300A A
AAluminum Aluminum
AluminumE E
EElectric Electric
ElectricA A
AAluminum Aluminum
Aluminum94 94
94No No
NoGearbox Gearbox Gearboxor or or
Compressor Compressor
CompressorA A
AStandard Standard
Standard
Induction Induction
InductionMotor Motor Motor
P P
PPolypropylene Polypropylene
Polypropylene04 04
04High High
HighSpeed Speed SpeedGear Gear Gear
Ratio Ratio
RatioC C
CATEX ATEX
ATEXInduction Induction Induction
Motor Motor
Motor
S S
SStainless Stainless
StainlessSteel Steel Steel06 06
06High High
HighSpeed Speed Speed
Gear Gear
GearRatio/240V Ratio/240V Ratio/240V
Compressor Compressor
Compressor
D D
DFlameproof Flameproof
Flameproof
Induction Induction
InductionMotor Motor Motor
G G
GNo No
NoMotor Motor Motor
63A7036E

CongurationNumberMatrix
Fluid Fluid
FluidCovers Covers Coversand and and
Manifolds Manifolds
Manifolds
Seat Seat
SeatMaterial Material MaterialBall Ball
BallMaterial Material MaterialDiaphragm Diaphragm DiaphragmMaterial Material MaterialManifold/Seat Manifold/Seat
Manifold/Seat
O O
O- - -Rings Rings Rings
A1 A1
A1Aluminum, Aluminum,
Aluminum,
center center
center󰘱ange, 󰘱ange, 󰘱ange,
npt npt
npt
AC AC
ACAcetal Acetal
AcetalAC AC
ACAcetal Acetal
AcetalGE GE
GEGeolast Geolast
Geolast– –
–– – –Model Model
Modeldoes does does
not not
notuse use use
o o
o- - -rings* rings* rings*
A2 A2
A2Aluminum, Aluminum,
Aluminum,
center center
center󰘱ange, 󰘱ange, 󰘱ange,
bspt bspt
bspt
AL AL
ALAluminum Aluminum
AluminumBN BN
BNBuna Buna
Buna- - -N N NPT PT
PTPTFE/EPDM PTFE/EPDM
PTFE/EPDM
2–Piece 2–Piece
2–PieceBN BN
BNBuna Buna
Buna- - -N N N
P1 P1
P1Polypropylene, Polypropylene,
Polypropylene,
center center
center󰘱ange 󰘱ange 󰘱angeBN BN
BNBuna Buna
Buna- - -N* N* N*CR CR
CRPolychloroprene Polychloroprene
PolychloropreneSP SP
SPSantoprene Santoprene
SantopreneFK FK
FKFKM FKM
FKMFluoroe- Fluoroe- Fluoroe-
lastomer lastomer
lastomer
S1 S1
S1Stainless Stainless
Stainlesssteel, steel, steel,
npt npt
nptFK FK
FKFKM FKM
FKMFluoroe- Fluoroe- Fluoroe-
lastomer* lastomer*
lastomer*CW CW
CWPolychloroprene Polychloroprene
Polychloroprene
Weighted Weighted
WeightedTP TP
TPTPE TPE
TPEPT PT
PTPTFE PTFE
PTFE
S2 S2
S2Stainless Stainless
Stainlesssteel, steel, steel,
bspt bspt
bsptGE GE
GEGeolast Geolast
GeolastFK FK
FKFKM FKM
FKM
Fluoroelastomer Fluoroelastomer
Fluoroelastomer
S51 S51
S51Stainless Stainless
Stainlesssteel, steel, steel,
center center
center󰘱ange 󰘱ange 󰘱angePP PP
PPPolypropy- Polypropy-
Polypropy-
lene lene
leneGE GE
GEGeolast Geolast
Geolast
SP SP
SPSantoprene Santoprene
SantoprenePT PT
PTPTFE PTFE
PTFE
SS SS
SS316 316
316Stainless Stainless Stainless
Steel Steel
SteelSP SP
SPSantoprene Santoprene
Santoprene
TP TP
TPTPE* TPE*
TPE*TP TP
TPTPE TPE
TPE
* *
*Models Models Modelswith with withBuna Buna Buna- - -N, N, N,FKM, FKM, FKM,or or orTPE TPE TPEseats seats seatsdo do donot not nothave have havemanifold/seat manifold/seat manifold/seato o o- - -rings. rings. rings.
Approvals Approvals
Approvals
✦ ✦
✦Aluminum Aluminum Aluminumand and andstainless stainless stainlesssteel steel steelpumps pumps pumpswith with with
motor motor
motorcode code codeC C Care are arecerti󰘰ed certi󰘰ed certi󰘰edto: to: to:
II II
II2 2 2G G GEx Ex Exh h hd d dIIB IIB IIBT3 T3 T3Gb Gb Gb
✚ ✚
✚Aluminum Aluminum Aluminumand and andstainless stainless stainlesssteel steel steelpumps pumps pumpswith with with
motor motor
motorcode code codeG G Gare are arecerti󰘰ed certi󰘰ed certi󰘰edto: to: to:
II II
II2 2 2G G GEx Ex Exh h hIIB IIB IIBT3 T3 T3Gb Gb Gb
★ ★
★Motors Motors Motorscoded coded codedD D Dare are arecerti󰘰ed certi󰘰ed certi󰘰edto: to: to:
Class Class
ClassI, I, I,Div Div Div1, 1, 1,Group Group GroupD, D, D,T3B T3B T3B
Class Class
ClassII, II, II,Div Div Div1, 1, 1,Group Group GroupF F F& & &G, G, G,T3B T3B T3B
All All
AllModels Models Models(except (except (exceptgearbox gearbox gearboxand and andcompressor compressor compressor
code code
code05 05 05or or ormotor motor motorcode code codeD D D) ) )are are aremarked: marked: marked:
3A7036E7

OrderingInformation
Ordering Ordering
OrderingInformation Information Information
To To
ToFind Find FindYour Your YourNearest Nearest NearestDistributor Distributor Distributor
1.Visitwww.graco.com.
2.ClickonWhere Where
Whereto to toBuy Buy BuyandusetheDistributor Distributor DistributorLocator. Locator. Locator.
To To
ToSpecify Specify Specifythe the theCon󰘰guration Con󰘰guration Con󰘰gurationof of ofa a aNew New NewPump Pump Pump
Please Please
Pleasecall call callyour your yourdistributor. distributor. distributor.
OR OR
OR
UsetheOnline Online
OnlineElectric Electric ElectricOperated Operated OperatedDiaphragm Diaphragm DiaphragmPump Pump PumpSelector Selector SelectorTool Tool Toolat at atwww.graco.com www.graco.com www.graco.com. . .SearchforSelector.
To To
ToOrder Order OrderReplacement Replacement ReplacementParts Parts Parts
Please Please
Pleasecall call callyour your yourdistributor. distributor. distributor.
83A7036E

Installation
Installation Installation
Installation
Installation Installation
Installationof of ofthis this thisequipment equipment equipmentinvolves involves involvespotentially potentially potentially
hazardous hazardous
hazardousprocedures. procedures. procedures.Only Only Onlytrained trained trainedand and andquali󰘰ed quali󰘰ed quali󰘰ed
personnel personnel
personnelwho who whohave have haveread read readand and andwho who whounderstand understand understand
the the
theinformation information informationin in inthis this thismanual manual manualshould should shouldinstall install installthis this this
equipment. equipment.
equipment.
• •
•All All Allelectrical electrical electricalwiring wiring wiringmust must mustbe be bedone done doneby by bya a aquali󰘰ed quali󰘰ed quali󰘰ed
electrician electrician
electricianand and andcomply comply complywith with withall all alllocal local localcodes codes codesand and and
regulations regulations
regulations
General General
GeneralInformation Information Information
The The
TheTypical Typical TypicalInstallation Installation Installationshown shown shownis is isonly only onlya a aguide guide guidefor for for
selecting selecting
selectingand and andinstalling installing installingsystem system systemcomponents. components. components.Contact Contact Contact
your your
yourGraco Graco Gracodistributor distributor distributorfor for forassistance assistance assistancein in inplanning planning planninga a a
system system
systemto to tosuit suit suityour your yourneeds. needs. needs.Always Always Alwaysuse use useGenuine Genuine Genuine
Graco Graco
GracoParts Parts Partsand and andaccessories. accessories. accessories.Be Be Besure sure sureall all allaccessories accessories accessories
are are
areadequately adequately adequatelysized sized sizedand and andpressure pressure pressurerated rated ratedto to tomeet meet meetthe the the
system’s system’s
system’srequirements. requirements. requirements.
Referencelettersinthetext,forexample(A),referto
thecalloutsinthe󰘰gures.
Tighten Tighten
TightenFasteners Fasteners Fasteners
Before Before
Beforemounting mounting mountingand and andusing using usingthe the thepump pump pumpfor for forthe the the󰘰rst 󰘰rst 󰘰rsttime, time, time,
check check
checkand and andretorque retorque retorqueall all allexternal external externalfasteners. fasteners. fasteners.Follow Follow Follow
Torque Torque
TorqueInstructions Instructions Instructions, , ,page page page22 22 22, , ,or or orsee see seethe the thetorque torque torque
tag tag
tagon on onyour your yourpump. pump. pump.After After Afterthe the the󰘰rst 󰘰rst 󰘰rstday day dayof of ofoperation, operation, operation,
retorque retorque
retorquethe the thefasteners. fasteners. fasteners.
Tips Tips
Tipsto to toReduce Reduce ReduceCavitation Cavitation Cavitation
Cavitation Cavitation
Cavitationin in ina a adouble double doublediaphragm diaphragm diaphragmpump pump pumpis is isthe the the
formation formation
formationand and andcollapse collapse collapseof of ofbubbles bubbles bubblesin in inthe the thepumped pumped pumped
liquid. liquid.
liquid.Frequent Frequent Frequentor or orexcessive excessive excessivecavitation cavitation cavitationcan can cancause cause cause
serious serious
seriousdamage, damage, damage,including including includingpitting pitting pittingand and andearly early earlywear wear wearof of of
󰘱uid 󰘱uid
󰘱uidchambers, chambers, chambers,balls, balls, balls,and and andseats. seats. seats.It It Itmay may mayresult result resultin in in
reduced reduced
reducedef󰘰ciency ef󰘰ciency ef󰘰ciencyof of ofthe the thepump. pump. pump.Cavitation Cavitation Cavitationdamage damage damage
and and
andreduced reduced reducedef󰘰ciency ef󰘰ciency ef󰘰ciencyboth both bothresult result resultin in inincreased increased increased
operating operating
operatingcosts. costs. costs.
Cavitationdependsonthevaporpressureofthe
pumpedliquid,thesystemsuctionpressure,andthe
velocitypressure.Itcanbereducedbychangingany
ofthesefactors.
1. 1.
1.Reduce Reduce Reducevapor vapor vaporpressure: pressure: pressure:Decrease Decrease Decreasethe the the
temperature temperature
temperatureof of ofthe the thepumped pumped pumpedliquid. liquid. liquid.
2. 2.
2.Increase Increase Increasesuction suction suctionpressure: pressure: pressure:
a. a.
a.Lower Lower Lowerthe the theinstalled installed installedposition position positionof of ofthe the thepump pump pump
relative relative
relativeto to tothe the theliquid liquid liquidlevel level levelin in inthe the thesupply. supply. supply.
b. b.
b.Reduce Reduce Reducethe the thefriction friction frictionlength length lengthof of ofthe the thesuction suction suction
piping. piping.
piping.Remember Remember Rememberthat that that󰘰ttings 󰘰ttings 󰘰ttingsadd add addfriction friction friction
length length
lengthto to tothe the thepiping. piping. piping.Reduce Reduce Reducethe the thenumber number numberof of of
󰘰ttings 󰘰ttings
󰘰ttingsto to toreduce reduce reducethe the thefriction friction frictionlength. length. length.
c. c.
c.Increase Increase Increasethe the thesize size sizeof of ofthe the thesuction suction suctionpiping. piping. piping.
NOTE: NOTE:
NOTE:Be Be Besure sure surethe the theinlet inlet inlet󰘱uid 󰘱uid 󰘱uidpressure pressure pressuredoes does doesnot not not
exceed exceed
exceed25% 25% 25%of of ofthe the theoutlet outlet outletworking working workingpressure. pressure. pressure.
3. 3.
3.Reduce Reduce Reduceliquid liquid liquidvelocity: velocity: velocity:Slow Slow Slowthe the thecyclic cyclic cyclicrate rate rateof of of
the the
thepump. pump. pump.
Pumpedliquidviscosityisalsoveryimportantbut
normallyiscontrolledbyfactorsthatareprocess
dependentandcannotbechangedtoreduce
cavitation.Viscousliquidsaremoredif󰘰culttopump
andmorepronetocavitation.
Gracorecommendstakingalltheabovefactors
intoaccountinsystemdesign.Tomaintainpump
ef󰘰ciency,supplyonlyenoughpowertothepumpto
achievetherequired󰘱ow.
Gracodistributorscansupplysitespeci󰘰c
suggestionstoimprovepumpperformanceand
reduceoperatingcosts.
3A7036E9

Installation
Figure1TypicalInstallationforpumpswithouta
compressor
System System
SystemComponents Components ComponentsRequired Required RequiredComponents Components ComponentsNot Not NotSupplied Supplied Supplied
BFluidinletportAPowercordtoVFD
CFluidoutletportFGrounded,󰘱exibleairsupplyline
DMountingfeetGBleed-typemasterairvalve(whenclosed,relievesair
pressurebetweenvalveandpump)
EAirinletportHAir󰘰lter/regulatorassembly(removedirtandmoisturein
airsupply;limitairpressuretopump)
PPumpGroundJMasterairvalve(foraccessories)
RCentersectionregulatorKGrounded,󰘱exible󰘱uidsupplyline
LFluiddrainvalve(allowreleaseofanypressurized󰘱uidin
󰘱uidoutletline)
MFluidshutoffvalve(prevent󰘱uidoutputthrough󰘱uid
outletline)
NGrounded,󰘱exible󰘱uidoutletline
103A7036E

Installation
Figure2Typicalinstallationofapumpwith
compressor
System System
SystemComponents Components ComponentsRequired Required RequiredComponents Components ComponentsNot Not NotSupplied Supplied Supplied
BFluidinletportAPowercordtoVFD
CFluidoutletportFPowercordtocompressor
DMountingfeetKGrounded,󰘱exible󰘱uidsupplyline
EAirinletportLFluiddrainvalve(allowreleaseofanypressurized
󰘱uidin󰘱uidoutletline)
PPumpGroundMFluidshutoffvalve(prevent󰘱uidoutputthrough󰘱uid
outletline)
RCentersectionregulatorNGrounded,󰘱exible󰘱uidoutletline
3A7036E11

Installation
Mount Mount
Mountthe the thePump Pump Pump
To To
Toavoid avoid avoidserious serious seriousinjury injury injuryor or ordeath death deathfrom from fromtoxic toxic toxic󰘱uid 󰘱uid 󰘱uidor or or
fumes: fumes:
fumes:
• •
•Never Never Nevermove move moveor or orlift lift lifta a apump pump pumpunder under underpressure. pressure. pressure.If If If
dropped, dropped,
dropped,the the the󰘱uid 󰘱uid 󰘱uidsection section sectionmay may mayrupture. rupture. rupture.Always Always Always
follow follow
followthe the thePressure Pressure PressureRelief Relief ReliefProcedure, Procedure, Procedure,page page page19 19 19, , ,
before before
beforemoving moving movingor or orlifting lifting liftingthe the thepump. pump. pump.
• •
•Do Do Donot not notexpose expose exposepump pump pumpor or orthe the theplastic plastic plasticcomponents components components
to to
todirect direct directsunlight sunlight sunlightfor for forprolonged prolonged prolongedperiods. periods. periods.
Prolonged Prolonged
Prolongedexposure exposure exposureto to toUV UV UVradiation radiation radiationwill will willdegrade degrade degrade
natural natural
naturalpolypropylene polypropylene polypropylenecomponents components componentsof of ofthe the thepumps. pumps. pumps.
NOTICE NOTICE
NOTICE
The The
Thepump pump pumpis is isheavy. heavy. heavy.To To Toprevent prevent preventdamage damage damagefrom from from
dropping, dropping,
dropping,always always alwaysuse use usea a alift lift liftto to tomove move movethe the thepump. pump. pump.Do Do Do
not not
notuse use usethe the themanifolds manifolds manifoldsto to tolift lift liftthe the thepump. pump. pump.Use Use Useat at atleast least least
two two
twostraps. straps. straps.
1. 1.
1.Ensure Ensure Ensurethat that thatthe the themounting mounting mountingsurface surface surfaceis is islevel level leveland and and
can can
cansupport support supportthe the theweight weight weightof of ofthe the thepump, pump, pump,lines, lines, lines,and and and
accessories, accessories,
accessories,as as aswell well wellas as asthe the thestress stress stresscaused caused causedduring during during
operation. operation.
operation.
2. 2.
2.Adjust Adjust Adjustthe the theleveling leveling levelingfeet feet feeton on onthe the thegear gear gearmotor motor motor
mounting mounting
mountingbracket bracket bracketso so sothat that thatall all allmounting mounting mountingpoints points pointsare are are
well well
wellsupported supported supportedand and andthe the thepump pump pumpdoes does doesnot not notwobble. wobble. wobble.
3. 3.
3.Bolt Bolt Boltthe the thepump pump pumpto to tothe the the󰘱oor 󰘱oor 󰘱oorthrough through throughthe the themounting mounting mounting
holes holes
holes(B) (B) (B)to to tosecure secure securethe the thepump pump pumpin in inposition. position. position.See See See
Dimensions Dimensions
Dimensions, , ,page page page26 26 26. . .
NOTE: NOTE:
NOTE:For For Forease ease easeof of ofoperation operation operationand and andservice, service, service,mount mount mount
the the
thepump pump pumpso so so󰘱uid 󰘱uid 󰘱uidinlet inlet inletand and and󰘱uid 󰘱uid 󰘱uidoutlet outlet outletports ports portsare are are
easily easily
easilyaccessible. accessible. accessible.
NOTICE NOTICE
NOTICE
To To
Toprevent prevent preventpump pump pumpdamage, damage, damage,use use useall all alleight eight eight
fasteners. fasteners.
fasteners.
Mounting Mounting
Mountinga a apump pump pumpwithout without withouta a aGearmotor Gearmotor Gearmotor
A A
Apump pump pumpwithout without withouta a aGraco Graco Gracogearbox gearbox gearboxand and andmotor motor motorwill will will
require require
requirea a amounting mounting mountingplatform platform platformto to toprovide provide providesupport support support
for for
forthe the thecustomer-supplied customer-supplied customer-suppliedmotor motor motorand and andgearbox gearbox gearbox
and and
andprovide provide providealignment alignment alignmentwith with withthe the thepump pump pumpalignment alignment alignment
housing housing
housing(116) (116) (116)and and anddrive drive driveshaft shaft shaft(112) (112) (112)without without withoutputting putting putting
strain strain
strainon on onthe the themounting mounting mountingplatform platform platformor or orpump. pump. pump.See See See
Dimensions Dimensions
Dimensions, , ,page page page26 26 26for for forassistance assistance assistancein in infabricating fabricating fabricatinga a a
mounting mounting
mountingplatform. platform. platform.
REF REF
REFDESCRIPTION DESCRIPTION
DESCRIPTIONDIMENSION DIMENSION DIMENSION
AA AA
AAGearbox Gearbox
Gearboxcoupler coupler couplerbore bore boreand and and
keyway keyway
keyway
35 35
35mm/10 mm/10 mm/10
mm mm
mmkeyway keyway keyway
BB BB
BBFlange Flange Flangepilot pilot pilotdiameter diameter diameter110 110
110mm mm mm
CC CC
CCBolt Bolt
Boltcircle circle circlediameter diameter diameter130 130
130mm mm mm
DD DD
DDMounting Mounting Mountinghole hole holethread thread threadsize size sizeM8 M8
M8x x x1.25 1.25 1.25
To To
Tospecify specify specifya a anon non non- - -Graco Graco Gracogearbox, gearbox, gearbox,refer refer referto to tothe the the󰘰gure 󰘰gure 󰘰gure
and and
andtable table tableabove. above. above.
123A7036E

Installation
Ground Ground
GroundThe The TheSystem System System
Theequipmentmustbegroundedtoreducethe
riskofstaticsparking.Staticsparkingcancause
fumestoigniteorexplode.Impropergrounding
cancauseelectricshock.Groundingprovidesan
escapewirefortheelectricalcurrent.
•Always Always
Alwaysgroundtheentire󰘱uidsystemas
describedbelow.
•PumpswithPolypropylene Polypropylene
Polypropyleneand and andPVDF PVDF PVDF󰘱uid
sectionsarenot not
notconductive.Never Never Neverusea
nonconductivepolypropyleneorPVDFpump
with󰘱ammable󰘱uids.
•Followyourlocal󰘰recodes.
Beforeoperatingthepump,groundthesystemas
explainedbelow.
•Pump: Pump:
Pump:Allpumpshaveagroundscrew.Loosen
thegroundingscrew.Insertoneendofa12–gauge
minimumgroundwirebehindthegroundscrew
andtightenthescrewsecurely.Connecttheclamp
endofthegroundingwiretoatrueearthground.A
groundwireandclamp,Part238909,isavailable
fromGraco.
•Motor: Motor:
Motor:Motorshaveagroundscrewintheelectrical
box.Useittogroundthemotortothecontroller.
•Air Air
AirLine Line Lineand and andFluid Fluid Fluidhoses: hoses: hoses:Useonlygrounded
hoseswithamaximumof500ft(150m)combined
hoselengthtoensuregroundingcontinuity.Check
electricalresistanceofhoses.Iftotalresistance
togroundexceeds29megohms,replacehose
immediately.
•Fluid Fluid
Fluidsupply supply supplycontainer: container: container:Followlocalcode.
•Solvent Solvent
Solventpails pails pailsused used usedwhen when when󰘱ushing: 󰘱ushing: 󰘱ushing:Followlocal
code.Useonlyconductivemetalpails,placed
onagroundedsurface.Donotplacethepail
onanonconductivesurface,suchaspaperor
cardboard,whichinterruptsgroundingcontinuity.
•VFD: VFD:
VFD:Groundthevariablefrequencydrivethrough
aproperconnectiontoapowersource.Referto
theVFDmanualforgroundinginstructions.
Checkyoursystemelectricalcontinuityafterthe
initialinstallation,andthensetuparegularschedule
forcheckingcontinuitytobesurepropergrounding
ismaintained.Theresistanceshouldnotexceed1
ohm.
3A7036E13

Installation
Air Air
AirLine Line Line
Models Models
Modelsthat that thatInclude Include Includea a aCompressor: Compressor: Compressor:
An An
Anair air airline line lineis is isalready already alreadyconnected connected connectedfrom from fromthe the thecompressor compressor compressor
to to
tothe the thepump pump pumpair air airinlet. inlet. inlet.
Using Using
UsingYour Your YourOwn Own OwnCompressor: Compressor: Compressor:
Installagrounded,󰘱exibleairhosefromthe
compressortothepumpairinlet(E).
Using Using
UsingShop Shop ShopAir: Air: Air:
1. 1.
1.Install Install Installan an anair air air󰘰lter/regulator 󰘰lter/regulator 󰘰lter/regulatorassembly assembly assembly(H). (H). (H).The The The
󰘱uid 󰘱uid
󰘱uidstall stall stallpressure pressure pressurewill will willbe be bethe the thesame same sameas as asthe the thesetting setting setting
of of
ofthe the theair air airregulator. regulator. regulator.The The The󰘰lter 󰘰lter 󰘰lterremoves removes removesharmful harmful harmful
dirt dirt
dirtand and andmoisture moisture moisturefrom from fromthe the thecompressed compressed compressedair air airsupply. supply. supply.
2. 2.
2.Locate Locate Locatea a ableed-type bleed-type bleed-typemaster master masterair air airvalve valve valve(G) (G) (G)close close closeto to to
the the
thepump pump pumpand and anduse use useit it itto to torelieve relieve relievetrapped trapped trappedair. air. air.Be Be Be
sure sure
surethe the thevalve valve valveis is iseasily easily easilyaccessible accessible accessiblefrom from fromthe the thepump pump pump
and and
andlocated located locateddownstream downstream downstreamfrom from fromthe the theregulator. regulator. regulator.
Trapped Trapped
Trappedair air aircan can cancause cause causethe the thepump pump pumpto to tocycle cycle cycle
unexpectedly, unexpectedly,
unexpectedly,which which whichcould could couldresult result resultin in inserious serious serious
injury injury
injuryfrom from fromsplashing. splashing. splashing.
3. 3.
3.Locate Locate Locateanother another anothermaster master masterair air airvalve valve valve(J) (J) (J)upstream upstream upstream
from from
fromall all allair air airline line lineaccessories accessories accessoriesand and anduse use useit it itto to toisolate isolate isolate
them them
themduring during duringcleaning cleaning cleaningand and andrepair. repair. repair.
4. 4.
4.Install Install Installa a agrounded, grounded, grounded,󰘱exible 󰘱exible 󰘱exibleair air airhose hose hose(F) (F) (F)between between between
the the
theaccessories accessories accessoriesand and andthe the thepump pump pumpair air airinlet. inlet. inlet.
Fluid Fluid
FluidSupply Supply SupplyLine Line Line
1. 1.
1.Connect Connect Connecta a agrounded, grounded, grounded,󰘱exible 󰘱exible 󰘱exible󰘱uid 󰘱uid 󰘱uidhose hose hose(K) (K) (K)to to to
the the
the󰘱uid 󰘱uid 󰘱uidinlet inlet inletport. port. port.The The Theport port porton on onpumps pumps pumpswith with with
aluminum, aluminum,
aluminum,stainless stainless stainlesssteel, steel, steel,or or orcast cast castiron iron iron󰘱uid 󰘱uid 󰘱uid
sections sections
sectionsis is is2 2 2in. in. in.npt(f) npt(f) npt(f)or or or2 2 2in. in. in.bspt. bspt. bspt.On On Onpumps pumps pumps
with with
withpolypropylene, polypropylene, polypropylene,conductive conductive conductivepolypropylene, polypropylene, polypropylene,
or or
orPVDF PVDF PVDF󰘱uid 󰘱uid 󰘱uidsections, sections, sections,the the theport port portis is isa a a2 2 2in. in. in.raised raised raised
face face
faceANSI/DIN ANSI/DIN ANSI/DIN󰘱ange. 󰘱ange. 󰘱ange.
2. 2.
2.If If Ifthe the theinlet inlet inlet󰘱uid 󰘱uid 󰘱uidpressure pressure pressureto to tothe the thepump pump pumpis is ismore more more
than than
than25% 25% 25%of of ofthe the theoutlet outlet outletworking working workingpressure, pressure, pressure,the the the
ball ball
ballcheck check checkvalves valves valveswill will willnot not notclose close closefast fast fastenough, enough, enough,
resulting resulting
resultingin in ininef󰘰cient inef󰘰cient inef󰘰cientpump pump pumpoperation. operation. operation.Excessive Excessive Excessive
inlet inlet
inlet󰘱uid 󰘱uid 󰘱uidpressure pressure pressurealso also alsowill will willshorten shorten shortendiaphragm diaphragm diaphragm
life. life.
life.Approximately Approximately Approximately3–5 3–5 3–5psi psi psi(0.02–0.03 (0.02–0.03 (0.02–0.03MPa, MPa, MPa,
0.21–0.34 0.21–0.34
0.21–0.34bar) bar) bar)should should shouldbe be beadequate adequate adequatefor for formost most most
materials. materials.
materials.
3. 3.
3.For For Formaximum maximum maximumsuction suction suctionlift lift lift(wet (wet (wetand and anddry), dry), dry),see see see
Technical Technical
TechnicalData, Data, Data,page page page35 35 35. . .For For Forbest best bestresults, results, results,always always always
install install
installthe the thepump pump pumpas as asclose close closeas as aspossible possible possibleto to tothe the the
material material
materialsource. source. source.Minimize Minimize Minimizesuction suction suctionrequirements requirements requirements
to to
tomaximize maximize maximizepump pump pumpperformance. performance. performance.
Fluid Fluid
FluidOutlet Outlet OutletLine Line Line
1. 1.
1.Connect Connect Connecta a agrounded, grounded, grounded,󰘱exible 󰘱exible 󰘱exible󰘱uid 󰘱uid 󰘱uidhose hose hose(N) (N) (N)to to to
the the
the󰘱uid 󰘱uid 󰘱uidinlet inlet inletport. port. port.The The Theport port porton on onpumps pumps pumpswith with with
aluminum, aluminum,
aluminum,stainless stainless stainlesssteel, steel, steel,or or orcast cast castiron iron iron󰘱uid 󰘱uid 󰘱uid
sections sections
sectionsis is is3 3 3in. in. in.npt(f) npt(f) npt(f)or or or3 3 3in. in. in.bspt. bspt. bspt.On On Onpumps pumps pumps
with with
withpolypropylene, polypropylene, polypropylene,conductive conductive conductivepolypropylene, polypropylene, polypropylene,
or or
orPVDF PVDF PVDF󰘱uid 󰘱uid 󰘱uidsections, sections, sections,the the theport port portis is isa a a3 3 3in. in. in.raised raised raised
face face
faceANSI/DIN ANSI/DIN ANSI/DIN󰘱ange. 󰘱ange. 󰘱ange.
2. 2.
2.Install Install Installa a a󰘱uid 󰘱uid 󰘱uiddrain drain drainvalve valve valve(L) (L) (L)near near nearthe the the󰘱uid 󰘱uid 󰘱uidoutlet. outlet. outlet.
3. 3.
3.Install Install Installa a ashutoff shutoff shutoffvalve valve valve(M) (M) (M)in in inthe the the󰘱uid 󰘱uid 󰘱uidoutlet outlet outletline. line. line.
143A7036E

Installation
Electrical Electrical
ElectricalConnections Connections Connections
All All
Allelectrical electrical electricalwiring wiring wiringmust must mustbe be becompleted completed completedby by bya a a
quali󰘰ed quali󰘰ed
quali󰘰edelectrician electrician electricianand and andcomply comply complywith with withall all alllocal local localcodes codes codes
and and
andregulations. regulations. regulations.
UseamotorsoftstarteroraVFDintheelectrical
circuitforallinstallations(notsupplied).VFDscanbe
purchasedthroughGraco.SeerecommendedVFD
kitsonpage36.
Wire Wire
WireConnections Connections Connectionsat at atthe the theMotor Motor Motor
(Motor (Motor
(MotorCode Code CodeA) A) A)
NOTE: NOTE:
NOTE:Follow Follow Followthe the theinstructions instructions instructionsin in inthe the themotor motor motor
manufacturer’s manufacturer’s
manufacturer’smanual. manual. manual.Use Use Usea a amotor motor motorstarter starter starterwith with with
overload overload
overloadprotection. protection. protection.Wire Wire Wiresize, size, size,fuse fuse fusesize, size, size,and and andother other other
electrical electrical
electricaldevices devices devicesmust must mustcomply comply complywith with withall all alllocal local localcodes codes codes
and and
andregulations. regulations. regulations.
The The
Themotor motor motormust must mustbe be bewired wired wiredto to tothe the theVFD. VFD. VFD.Install Install Installthe the the
wiring wiring
wiringat at atthe the themotor motor motoras as asfollows: follows: follows:
1. 1.
1.Remove Remove Remove4 4 4bolts bolts boltsto to toopen open openthe the themotor’s motor’s motor’selectrical electrical electrical
box. box.
box.
2. 2.
2.Install Install Installa a astrain strain strainrelief relief reliefin in inone one oneof of ofthe the theports ports portsat at atthe the the
bottom bottom
bottomof of ofthe the thejunction junction junctionbox. box. box.
3. 3.
3.Connect Connect Connectthe the thegreen green greenground ground groundwire wire wireto to tothe the theground ground ground
screw. screw.
screw.
4. 4.
4.For For For230 230 230V V Vmotors: motors: motors:Bridge Bridge Bridgeas as asshown, shown, shown,then then then
connect connect
connectL1 L1 L1to to toT1, T1, T1,L2 L2 L2to to toT2, T2, T2,and and andL3 L3 L3to to toT3. T3. T3.
T4 T5 T6
L2 L3L1
T7 T8 T9
T1 T2 T3
Figure Figure
Figure3 3 3Wire Wire WireConnections Connections Connectionsfor for fora a a230 230 230V V VMotor Motor Motor
5. 5.
5.For For For460 460 460V V Vmotors: motors: motors:Bridge Bridge Bridgeas as asshown, shown, shown,then then then
connect connect
connectL1 L1 L1to to toT1, T1, T1,L2 L2 L2to to toT2, T2, T2,and and andL3 L3 L3to to toT3. T3. T3.
T4 T5 T6
L2 L3L1
T7 T8 T9
T1 T2 T3
Figure Figure
Figure4 4 4Wire Wire WireConnections Connections Connectionsfor for fora a a460 460 460V V VMotor Motor Motor
6. 6.
6.Close Close Closethe the themotor motor motorelectrical electrical electricalbox. box. box.Torque Torque Torquethe the thebolts bolts bolts
to to
to20 20 20in-lb in-lb in-lb(2.2 (2.2 (2.2N•m). N•m). N•m).
Wire Wire
WireConnections Connections Connectionsat at atthe the theVariable Variable VariableFrequency Frequency Frequency
Drive Drive
Drive(VFD) (VFD) (VFD)
NOTE: NOTE:
NOTE:Follow Follow Followthe the theinstructions instructions instructionsin in inthe the theVFD VFD VFD
manufacturer’s manufacturer’s
manufacturer’smanual. manual. manual.
Install Install
Installthe the thewiring wiring wiringat at atthe the theVFD VFD VFDas as asfollows: follows: follows:
1. 1.
1.Connect Connect Connectthe the thewires wires wiresto to tothe the themotor. motor. motor.See See See
Electrical Electrical
ElectricalConnections Connections Connections, , ,page page page15 15 15. . .
2. 2.
2.Open Open Openthe the theVFD’s VFD’s VFD’selectrical electrical electricalbox. box. box.
3. 3.
3.Install Install Installstrain strain strainreliefs reliefs reliefsin in inboth both bothports ports portsat at atthe the thebottom bottom bottomof of of
the the
theVFD VFD VFDbox. box. box.
4. 4.
4.Connect Connect Connectthe the thegreen green greenground ground groundwire wire wireto to tothe the theground ground ground
screw. screw.
screw.
5. 5.
5.Connect Connect Connectthe the thewires wires wiresfrom from fromthe the themotor motor motorterminals terminals terminalsto to tothe the the
matching matching
matchingterminals terminals terminalsin in inthe the theVFD VFD VFDbox, box, box,as as asshown. shown. shown.
U/T1 V/T2 W/T3 PE
PE
PES
PES
PES
PES
PES
PE
Figure Figure
Figure5 5 5Wire Wire WireConnections Connections Connectionsfrom from fromthe the theMotor Motor Motorto to tothe the theVFD VFD VFD
3A7036E15

Installation
Main Main
MainPower Power PowerConnections Connections Connectionsat at atthe the theVFD VFD VFD
All All
Allelectrical electrical electricalwiring wiring wiringmust must mustbe be becompleted completed completedby by bya a a
quali󰘰ed quali󰘰ed
quali󰘰edelectrician electrician electricianand and andcomply comply complywith with withall all alllocal local localcodes codes codes
and and
andregulations. regulations. regulations.
Connect Connect
Connectthe the thepower power powersupply supply supplywires wires wiresto to tothe the theVFD, VFD, VFD,as as as
follows: follows:
follows:
1. 1.
1.Connect Connect Connectthe the thewiring wiring wiringbetween between betweenthe the themotor motor motorand and andVFD, VFD, VFD,
as as
asdetailed detailed detailedabove. above. above.
2. 2.
2.Connect Connect Connectthe the thegreen green greenground ground groundwire wire wireof of ofthe the thepower power power
supply supply
supplyto to tothe the theground ground groundscrew. screw. screw.The The Theground ground groundwire wire wire
from from
fromthe the themotor motor motoris is isalso also alsoconnected connected connectedto to tothis this thisscrew. screw. screw.
3. 3.
3.Connect Connect Connectthe the thepower power powersupply supply supplywires wires wiresto to tothe the thepower power power
terminals terminals
terminalsin in inthe the theVFD VFD VFDbox, box, box,following following followingall all alllocal local local
codes codes
codesand and andregulations. regulations. regulations.
4. 4.
4.Close Close Closethe the theVFD VFD VFDelectrical electrical electricalbox. box. box.
Leak Leak
LeakSensor Sensor SensorWiring Wiring Wiring
Follow Follow
Followthese these theseinstructions instructions instructionsto to towire wire wirethe the theLeak Leak LeakSensor Sensor Sensorto to to
a a
aVFD. VFD. VFD.
NOTE: NOTE:
NOTE:The The Theleak leak leaksensor sensor sensoris is isdesigned designed designedto to tooperate operate operateas as as
a a
anormally-closed normally-closed normally-closedcircuit. circuit. circuit.
1. 1.
1.Turn Turn Turnoff off offpower power powerto to tothe the theVFD. VFD. VFD.
2. 2.
2.Open Open Openthe the theaccess access accesscover cover coveron on onthe the theVFD. VFD. VFD.
3. 3.
3.For For Fora a aGraco Graco GracoVFD, VFD, VFD,perform perform performthe the thefollowing: following: following:
a. a.
a.Wire Wire Wireone one onelead lead leadto to toterminal terminal terminal4 4 4on on onthe the therail. rail. rail.
b. b.
b.Wire Wire Wirea a asecond second secondlead lead leadto to toterminal terminal terminal13A 13A 13Aon on onthe the the
rail. rail.
rail.
c. c.
c.Close Close Closethe the theaccess access accesscover. cover. cover.
d. d.
d.Turn Turn Turnon on onpower power powerto to tothe the theVFD. VFD. VFD.
e. e.
e.Go Go Goto to toscreen screen screenP121. P121. P121.
f. f.
f.Change Change Changethe the thevalue value valueto to to21 21 21and and andpress press pressthe the theMode Mode Mode
button. button.
button.
4. 4.
4.For For Fora a anon-Graco non-Graco non-GracoVFD, VFD, VFD,perform perform performthe the thefollowing: following: following:
a. a.
a.Attach Attach Attachthe the thetwo two twoleads leads leadsto to tothe the thedetection detection detectioncircuit circuit circuit
in in
inthe the theVFD. VFD. VFD.
NOTE: NOTE:
NOTE:Refer Refer Referto to tothe the theVFD VFD VFDmanual manual manualfor for forproper proper proper
connection connection
connectionpoints. points. points.
b. b.
b.Close Close Closethe the theaccess access accesscover. cover. cover.
c. c.
c.Turn Turn Turnon on onpower power powerto to tothe the theVFD. VFD. VFD.
d. d.
d.Con󰘰gure Con󰘰gure Con󰘰gurethe the theVFD VFD VFDto to tomonitor monitor monitorthe the theleak leak leaksensor sensor sensor
circuit. circuit.
circuit.
5. 5.
5.Refer Refer Referto to tothe the theVFD VFD VFDmanual manual manualfor for forinformation information informationon on onhow how how
to to
tocon󰘰gure con󰘰gure con󰘰gurethe the theVFD VFD VFDto to togenerate generate generatea a afault fault faultor or orstop stop stop
the the
thepump pump pumpwhen when whena a aleak leak leakis is isdetected. detected. detected.
163A7036E

Installation
Compressor Compressor
CompressorWiring Wiring Wiring
To To
Toavoid avoid avoidinjury injury injuryfrom from from󰘰re, 󰘰re, 󰘰re,explosion, explosion, explosion,or or orelectric electric electric
shock, shock,
shock,all all allelectrical electrical electricalwiring wiring wiringmust must mustbe be bedone done doneby by bya a a
quali󰘰ed quali󰘰ed
quali󰘰edelectrician electrician electricianand and andcomply comply complywith with withall all alllocal local localcodes codes codes
and and
andregulations. regulations. regulations.
Follow Follow
Followthese these theseinstructions instructions instructionsto to towire wire wireGraco Graco GracoCompressor Compressor Compressor
24Y544 24Y544
24Y544(120V) (120V) (120V)or or or24Y545 24Y545 24Y545(240V). (240V). (240V).
NOTE: NOTE:
NOTE:Use Use Useonly only onlycopper copper copperwire wire wirewith with withan an aninsulation insulation insulationrating rating rating
of of
of75°C 75°C 75°Cor or orhigher. higher. higher.
1. 1.
1.Remove Remove Removethe the thecover cover coverfrom from fromthe the thecompressor’s compressor’s compressor’s
electrical electrical
electricalbox. box. box.
2. 2.
2.Install Install Installwiring wiring wiringsystem system systemwith with withproper proper properconnections connections connections(i.e. (i.e. (i.e.
conduit/󰘰ttings, conduit/󰘰ttings,
conduit/󰘰ttings,power power powercable/cable cable/cable cable/cablegrip) grip) grip)to to tothe the the
compressor compressor
compressorelectrical electrical electricalbox. box. box.
3. 3.
3.Connect Connect Connectline line linepower power power(120VAC (120VAC (120VACor or or240 240 240VAC, VAC, VAC,
depending depending
dependingon on onyour your yourcompressor) compressor) compressor)to to toL1 L1 L1and and andL2/N. L2/N. L2/N.
Connect Connect
Connectsupply supply supplyground ground groundto to to
. .
.Use Use Useminimum minimum minimum
12 12
12AWG AWG AWG(4 (4 (4mm mm mm2 2
2) )
)wire wire wirewhen when whenthe the thesystem system systemis is is
con󰘰gured con󰘰gured
con󰘰guredfor for fora a a16A 16A 16Acircuit circuit circuitand and and14 14 14AWG AWG AWG(2.5 (2.5 (2.5
mm mm
mm2 2
2) )
)when when whencon󰘰gured con󰘰gured con󰘰guredfor for fora a a12A 12A 12Acircuit. circuit. circuit.Torque Torque Torque
terminals terminals
terminalsto to to10 10 10in-lb in-lb in-lb(1.2 (1.2 (1.2N•m). N•m). N•m).
4. 4.
4.Reinstall Reinstall Reinstallthe the thecover cover coverof of ofthe the theelectrical electrical electricalbox. box. box.Torque Torque Torque
screws screws
screwsto to to60 60 60in-lb in-lb in-lb(6.8 (6.8 (6.8N•m). N•m). N•m).
Figure6
L1
L2
A
KEY KEY
KEY
A A
ATo To Topower power powersupply supply supply
3A7036E17

Operation
Operation Operation
Operation
Tighten Tighten
TightenFasteners Fasteners Fasteners
Before Before
Beforemounting mounting mountingand and andusing using usingthe the thepump pump pumpfor for forthe the the󰘰rst 󰘰rst 󰘰rsttime, time, time,
check check
checkand and andretorque retorque retorqueall all allexternal external externalfasteners. fasteners. fasteners.Follow Follow Follow
Torque Torque
TorqueInstructions Instructions Instructions, , ,page page page22 22 22, , ,or or orsee see seethe the thetorque torque torque
tag tag
tagon on onyour your yourpump. pump. pump.After After Afterthe the the󰘰rst 󰘰rst 󰘰rstday day dayof of ofoperation, operation, operation,
retorque retorque
retorquethe the thefasteners. fasteners. fasteners.
Initial Initial
InitialCon󰘰guration Con󰘰guration Con󰘰guration(AC (AC (ACwith with withVFD) VFD) VFD)
Con󰘰gure Con󰘰gure
Con󰘰gurethe the theVFD VFD VFDaccording according accordingto to tothe the themotor motor motornameplate nameplate nameplate
information. information.
information.
Flush Flush
Flushthe the thePump Pump PumpBefore Before BeforeFirst First FirstUse Use Use
The The
Thepump pump pumpwas was wastested tested testedin in inwater. water. water.If If Ifwater water watercould could could
contaminate contaminate
contaminatethe the the󰘱uid 󰘱uid 󰘱uidyou you youare are arepumping, pumping, pumping,󰘱ush 󰘱ush 󰘱ushthe the the
pump pump
pumpthoroughly thoroughly thoroughlywith with witha a acompatible compatible compatiblesolvent. solvent. solvent.See See See
Flushing Flushing
Flushingand and andStorage Storage Storage, , ,page page page21 21 21. . .
Start Start
Startand and andAdjust Adjust Adjustthe the thePump Pump Pump
1. 1.
1.Be Be Besure sure surethe the thepump pump pumpis is isproperly properly properlygrounded. grounded. grounded.See See See
Ground Ground
GroundThe The TheSystem System System, , ,page page page13 13 13. . .
2. 2.
2.Check Check Check󰘰ttings 󰘰ttings 󰘰ttingsto to tobe be besure sure surethey they theyare are aretight. tight. tight.Use Use Usea a a
compatible compatible
compatibleliquid liquid liquidthread thread threadsealant sealant sealanton on onmale male malethreads. threads. threads.
Tighten Tighten
Tighten󰘱uid 󰘱uid 󰘱uidinlet inlet inletand and and󰘱uid 󰘱uid 󰘱uidoutlet outlet outlet󰘰ttings 󰘰ttings 󰘰ttingssecurely. securely. securely.
3. 3.
3.Place Place Placethe the thesuction suction suctiontube tube tube(if (if (ifused) used) used)in in in󰘱uid 󰘱uid 󰘱uidto to tobe be be
pumped. pumped.
pumped.
NOTE: NOTE:
NOTE:If If If󰘱uid 󰘱uid 󰘱uidinlet inlet inletpressure pressure pressureto to tothe the thepump pump pumpis is ismore more more
than than
than25% 25% 25%of of ofoutlet outlet outletworking working workingpressure, pressure, pressure,the the theball ball ball
check check
checkvalves valves valveswill will willnot not notclose close closefast fast fastenough, enough, enough,resulting resulting resulting
in in
ininef󰘰cient inef󰘰cient inef󰘰cientpump pump pumpoperation. operation. operation.
NOTICE NOTICE
NOTICE
Excessive Excessive
Excessive󰘱uid 󰘱uid 󰘱uidinlet inlet inletpressure pressure pressurecan can canreduce reduce reduce
diaphragm diaphragm
diaphragmlife. life. life.
4. 4.
4.Place Place Placethe the theend end endof of ofthe the the󰘱uid 󰘱uid 󰘱uidhose hose hoseinto into intoan an anappropriate appropriate appropriate
container. container.
container.
5. 5.
5.Close Close Closethe the the󰘱uid 󰘱uid 󰘱uiddrain drain drainvalve valve valve(L). (L). (L).
6. 6.
6.Turn Turn Turnthe the theair air airregulator regulator regulatorknob knob knob(R) (R) (R)to to tomatch match matchthe the the
desired desired
desired󰘱uid 󰘱uid 󰘱uidstall stall stallpressure. pressure. pressure.Open Open Openall all allbleed-type bleed-type bleed-type
master master
masterair air airvalves. valves. valves.
7. 7.
7.If If Ifthe the the󰘱uid 󰘱uid 󰘱uidhose hose hosehas has hasa a adispensing dispensing dispensingdevice, device, device,hold hold holdit it it
open. open.
open.Be Be Besure sure sureall all all󰘱uid 󰘱uid 󰘱uidshutoff shutoff shutoffvalves valves valvesare are areopen. open. open.
8. 8.
8.Set Set Setthe the thedesired desired desiredfrequency frequency frequencyon on onthe the theVFD. VFD. VFD.
9. 9.
9.Start Start Startthe the theVFD. VFD. VFD.
10. 10.
10.If If Ifyou you youare are are󰘱ushing, 󰘱ushing, 󰘱ushing,run run runthe the thepump pump pumplong long longenough enough enoughto to to
thoroughly thoroughly
thoroughlyclean clean cleanthe the thepump pump pumpand and andhoses. hoses. hoses.
183A7036E

Operation
Pressure Pressure
PressureRelief Relief ReliefProcedure Procedure Procedure
FollowthePressureReliefProcedure
wheneveryouseethissymbol.
Thisequipmentstayspressurizeduntilpressure
isrelievedmanually.Tohelppreventserious
injuryfrompressurized󰘱uid,suchassplashing
intheeyesoronskin,followthePressureRelief
Procedurewhenyoustoppumpingandbeforeyou
clean,check,orservicetheequipment.
1. 1.
1.Stop Stop Stopthe the theVFD VFD VFDto to toremove remove removepower power powerto to tothe the themotor. motor. motor.
2. 2.
2.Open Open Openthe the the󰘱uid 󰘱uid 󰘱uiddrain drain drainvalve valve valve(L), (L), (L),to to torelieve relieve relieve󰘱uid 󰘱uid 󰘱uid
pressure. pressure.
pressure.Have Have Havea a acontainer container containerready ready readyto to tocatch catch catchthe the the
drainage. drainage.
drainage.
3. 3.
3.Remove Remove Removesupply supply supplyair air airto to tothe the thepump: pump: pump:
a. a.
a.Unit Unit Unitwithout without withoutair air aircompressor: compressor: compressor:Shut Shut Shutoff off offthe the the
master master
masterair air airvalve valve valve(G). (G). (G).
b. b.
b.Unit Unit Unitwith with withair air aircompressor: compressor: compressor:Turn Turn Turndown down downcenter center center
section section
sectionregulator regulator regulator(R) (R) (R)to to tozero zero zeroto to torelieve relieve relieveair air air
pressure pressure
pressurein in incenter center centersection. section. section.
Pump Pump
PumpShutdown Shutdown Shutdown
Attheendoftheworkshiftandbeforeyoucheck,
adjust,clean,orrepairthesystem,followthe
PressureReliefProcedure,page19.
3A7036E19

VFDOperation
VFD VFD
VFDOperation Operation Operation
VFD VFD
VFDControl Control ControlPanel Panel Panel
NOTE: NOTE:
NOTE:This This Thisinformation information informationis is isspeci󰘰c speci󰘰c speci󰘰cto to toGraco’s Graco’s Graco’s
VFD. VFD.
VFD.For For Forcomplete complete completeinformation information informationabout about aboutanother another another
manufacturer’s manufacturer’s
manufacturer’sVFD, VFD, VFD,see see seethe the themanufacturer’s manufacturer’s manufacturer’s
instructions instructions
instructionssupplied supplied suppliedwith with withthe the theVFD. VFD. VFD.
• •
•The The Thecontrol control controlpanel panel paneldisplay display displayshows shows showsthe the thestatus status statusof of ofthe the the
motor. motor.
motor.
• •
•The The Thegreen green greenRUN RUN RUNkey key keystarts starts startsthe the themotor. motor. motor.
• •
•The The Thered red redSTOP STOP STOPkey key keystops stops stopsthe the themotor. motor. motor.
• •
•Use Use Usethe the thearrow arrow arrowkeys keys keysto to tospeed speed speedup up upor or orslow slow slowdown down downthe the the
motor. motor.
motor.
• •
•The The Theblue blue blueM M Mkey key keyaccesses accesses accessesthe the theVFD VFD VFDmenu. menu. menu.See See Seethe the the
manufacturer’s manufacturer’s
manufacturer’sinstructions instructions instructionsfor for formenu menu menudescriptions descriptions descriptions
and and
andinformation. information. information.
NOTE: NOTE:
NOTE:If If Ifthe the theM M Mkey key keyis is ispressed, pressed, pressed,use use usethe the thearrow arrow arrowkeys keys keys
to to
toscroll scroll scrollthrough through throughthe the theVFD VFD VFDmenu. menu. menu.
FWDAUTO
REV
STOP
RUN
Figure Figure
Figure7 7 7VFD VFD VFDControl Control ControlPanel Panel Panel
Adjust Adjust
Adjustthe the theSpeed Speed Speed
VFD VFD
VFDsettings settings settingsare are arepreset preset presetat at atthe the thefactory factory factoryfor for formost most most
applications. applications.
applications.To To Tochange change changethe the thespeed speed speedof of ofthe the thepump, pump, pump,use use use
the the
thearrow arrow arrowkeys keys keyson on onthe the theVFD VFD VFDcontrol control controlpanel panel panelto to toincrease increase increase
or or
ordecrease decrease decreasethe the themotor motor motorspeed. speed. speed.
203A7036E