GrainWood Greenport GP0903 User manual

page 1 / 18
GP0903
GP0940
Brushed White
Brushed Grey
MADE IN BRAZIL
PH#2
Finish
Model #
REV - 05/2020
Assembly Instructions
Wardrobe 3 Door 2 Drawer
Greenport Collection
21 1/2”
59 1/2”
73 3/4”
Every effort has been made to ensure your Wood Furniture is
of the finest quality. If you have any questions or need
any replacement parts, please do not hesitate to contact
us at www.grainwoodfurniture.com
Thank you for purchasing our furniture, it’s an honor to be
in your home!
www.grainwoodfurniture.com

Enjoy your Real Wood Furniture!
Here are some tips on assembling yourflat-pack furniture in order to minimize your
assembly time and frustrations:
-Do Not throw away packaging material until assembly is complete.
-Assemble the item on a soft surface, such as cardboard or old blanket, to protect
finish from possible dents of scratches.
-Choose a spacious, open area near where the piece will be located. It is easier to
move parts than to relocate the furniture after it is fully assembled, depending on
its size and weight.
-Organize everything and count it twice. lf you organize the items by parts, you'll
find it much easier to grab each piece as you build.
- Real Wood furniture may present imperfections such as wood knots, minor
splits or cracks that are part of the natural aspect of the material. In few cases,
also can be caused by variations of air moisture and temperature.
Whenever stability of the piece of furniture is not compromised we recommend
customers to perform cosmetic touch-ups by wax crayonfillers sold at all major
hardware stores.
-It is best to use any tools the kit provides, such as a hex key, because they may
be specially sized for that piece of furniture. We do not recommend the use of
power drill, it can damage your furniture if not used correctly.
-Read the entire list of instructions, arranging your parts in order of use as you go.
-Finally, Enlist a help from friends and family since proper assembly of most items
require 2 people.
PLEASE READ BELOW BEFORE BEGINNING YOUR ASSEMBLY
Wood Furniture Care:
- Clean with a cloth dampened with water or furniture polish following the pattern
of the grain.
- Do NOT use solvents such as alcohol for cleaning.
- Avoid placing under direct sun light, to prevent UV damage.
- Avoid positioning very close to heaters or AC vents.
- Hot pads should always be used when placing warm serving dishes on your furniture.
- Very hot items such as a sauce pan or baking dish should never be placed on a
tabletop, even with a hot pad.
- Place mats will help to protect the finish from dishes and silverware, and coasters
will help protect your furniture from moisture.
page 2 / 18

A1 4,0x30 44 + 2
A4 3,5x14 24 + 2
C2 8,0x25 57 + 2
A16 4,0x40 09 + 1
D4 16
3,5x16
A9 55 + 2
metal
A25 M4x25 07 + 1
D10 02
HARDWARE LIST
D27 05
A18 4,0x25 04 + 1
D21 04 + 1
+ 1
F10 09
G1 10x10 47
E10
E10
02
02
06
H11 07
450mm - 17 3/4"
450mm - 17 3/4"
450mm - 17 3/4"
450mm - 17 3/4"
Wardrobe
RIGHT
Wardrobe
LEFT
Drawer
RIGHT
Drawer
LEFT
02
02
Before starting assembly
please verify if the hardware
set is complete.
For missing hardware please
contact us at
www.grainwoodfurniture.com
WARNING:
CHOKING HAZARD
- Small Parts, not for Children.
To be Assembled by an Adult.
!ATTENTION
page 3 / 18
A8 3,0x20 02 + 1
F9 01
F8 02
FURNITURE ANTI-TIPPING RESTRAINT KIT

Part # Description qty
03 1
02 Right side 1
04 1
01 1
Left side
Upper crosspiece
13 2
12 2
2
09 2
08 Drawer front 2
10 2
06 1
Rear crosspiece
Drawer right side
Drawer Left side
Drawer bottom
Drawer back
Drawer bottom support
Parts list
Box 1 Box 2
Part # Description qty
05
07
1
2
Lower crosspiece
Back panel
14
16
17
18
23
24
1
1
1
1
1
3
Fixed shelf
Wide shelf (adjustable)
Hanging bar
Left Door
Base short
Narrow shelf (adjustable)
26 1
Long stabilizer
20 1
15 Profile “H” 1
21 1
Door stop
Right door - tall
22
25
1
1
Division
Back panel
27 1
Short stabilizer
1
Hardware
01
2x
02
03
22
06
05
04
08
09
10 11
12
16
13
14
15
07
17
18
19
20
26
19 1
Right Door
07
21
23
24
25
27
24
24
page 4 / 18

C2 8,0x25 57
D21 04
C2
2x 2x
2x
01)
14
23
04
06
26
05
27
10
09
02
03
22
13
page 5 / 18

F10 09
22
A4 3,5x14
3,5x16 18
16
A9 D10 02
02)
03
02
E10
450mm - 17 3/4"
02
E11
450mm - 17 3/4"
02
Wardrobe
RIGHT
Wardrobe
LEFT
ATTENTION PLEASE!
Assemble Hinge ( F10 ) to hinge plate if it comes
separated. Push the hinge against plate until it clicks. click!
page 6 / 18

04)
03)
A1 4,0x30 03
A1 4,0x30 09
22
14
26
22
06
03
page 7 / 18

06)
05)
A1 4,0x30 04
A1 4,0x30 08
A18 02
4,0x25
02
04
04
05
23
22
27
page 8 / 18

A18 02
4,0x25
08)
07)
A16 4,0x40 09
ATTENTION
Make sure the Finished surface is
facing the inside of the Wardrobe
01
G1 10x10 47
D27 05
G1
25
07
07
page 9 / 18

10)
09)
G11 06
G11
G11
G11
G11
G11
G11
G11
15
07
07
25
3,5x16 14
A9
"2
/1
72
D27 05
15
07
07
page 10 / 18

Chose the desired shelf height
and insert metal supports
D4 16
metal
12)
11)
17
17
24
24
24
16
21
page 11 / 18

A25 M4x25 01
H11 01
3,5x16 06
A9
13)
14)
19
page 12 / 18

A25 M4x25 01
H11 01
3,5x16 06
A9
15)
16)
18
page 13 / 18

17)
A25 M4x25 01
3,5x16 11
A9 H11 01
20
A9
20
18
page 14 / 18

18)
09
10
08
A1
A1
A1
11
12
A1
A1
A1
A1
12
12
13
!
1"
12
13
09
A1
A1 4,0x30 20
2x
A1
A1
page 15 / 18

19)
If fine tunning on the glides
is needed please follow the
steps below
FLIP THE ASSEMBLED DRAWER
UPSIDE DOWN TO INSTALL GLIDES
20) 2x
2x
E10 A4
A4
A4
A4
E11 A4
A4
A4 3,5x14 08
E10
450mm - 17 3/4"
02
E11
450mm - 17 3/4"
02
Drawer
RIGHT
Drawer
LEFT
21)
nd
2
rd
3
rd
4
st
1
H11 04
A25 M4x25 04
page 16 / 18
Place the labeled drawer
on the top position
!

23)
page 17 / 18
!
A8 3,0x20 02
F9 01
F8 02
FURNITURE ANTI-TIPPING RESTRAINT KIT
Install against the furniture
A8
A8
F8
F8
Anchors and screws are not included,
choose best type based on your wall
install on the wall
F9
WALLBOARDWALLBOARD
Install both parts F8
Tighten them together
using the safety strap
F8

1. 2. 3.
2.
3.2.1.
1. 2. 3.
1.
page 18 / 18