GrainWood Shaker SH0401 User manual

20” 16”
23 ”
Assembly Instructions
SH0401
SH0402
Cherry
Expresso
Finish
Model #
Thank you for choosing Grain Wood Furniture, it is an honor to be in your home!
If you have any questions, feedback, or need replacement parts please contact us at:
grainwoodfurniture.com/help or [email protected]
1-person assembly
PH #2
Made in Brazil
REV - 06/2021 page 1/10
Shaker Collection
2-Drawer Nightstand
SH0404 Walnut

page 2/10
ŸEnlist help from a friend or family member as most items require two
people for proper assembly.
ŸChoose a spacious, open area near where the piece will be located once
assembled. It is easier to move parts than to relocate the furniture after it
is fully assembled.
ŸDo not throw away packaging material until assembly is complete.
ŸAssemble the item on a soft surface, such as cardboard or an old blanket
in order to protect the finish from possible dents or scratches.
ŸLay out the parts in order and count them twice. In case any parts are
missing or damaged, document the problem with pictures and contact
support so we can make it right.
ŸSolid wood furniture may present imperfections such as wood knots,
minor splits or cracks which are a natural aspect of the material.
Whenever stability of the furniture is not compromised, we recommend
customers perform cosmetic touch-ups with wax crayon fillers sold at all
major hardware stores.
ŸIt is best to use the tools provided in the box, such as a hex key, because
they may be specially sized for the piece of furniture.
ŸWe do not recommend the use of power drills as they can damage your
furniture if not used correctly.
ŸUse a carpenter's square or hardcover book to check angles when
assembling drawers and doors. If they are not at 90 degrees, they will not
close properly.
ŸIf you have any problems, we are here to help. Just go to
grainwoodfurniture.com/help.
ŸSee grainwoodfurniture.com/care-guide for suggestions that will help
your furniture last for years.
Enjoy your 100% solid wood furniture!
PLEASE READ BELOW BEFORE BEGINNING ASSEMBLY

A1 4,0x30 27 + 2
A4 3,5x14 6 + 1
C2 8,0x25 24 + 2
G1 10x10 14
H4 2
A25 M4x25 2 + 1
G11 4
B31 6,0x10 16 + 1
E13
E13
2
2
330mm - 13"
330mm - 13"
Drawer
RIGHT
E14
E14
2
2
330mm - 13"
330mm - 13"
Drawer
LEFT
page 3/10
HARDWARE LIST
RIGHT
Side
LEFT
Side
Before starting assembly
please verify the hardware
set is complete.
For missing hardware please
contact us at
grainwoodfurniture.com/help
WARNING:
CHOKING HAZARD
Small parts, not for children.
To be assembled by an adult.
!ATTENTION

01
2x
02
03
07
06
05
04
08
09
10 11
12
Part # Description Qty.
03 1
02
Right side
1
04 1
01 1
Left side
Upper crosspiece
05
06
07
08
09
10
12
HW
1
1
1
2
2
2
2
2
Lower crosspiece
Rear crosspiece
Back panel
Drawer front
Drawer right side
Drawer left side
Drawer bottom
Drawer back
1
Hardware
page 4/10
BOX

1)
2)
C2
03
C2
C2
C2
C2 C2
C2
C2
C2
C2
C2
C2
C2
C2
C2
C2
C2
C2
C2
C2
04
05
06
2x
09
02
B31
B31
B31
B31 E14
E14
B31
B31
B31
B31
E13
E13
02
03
B31 6,0x10 8
2x
10
B31
E13
B31
330mm - 13"
2
E13
330mm - 13"
2E14
LEFT
Side
RIGHT
Side
C2 8,0x25 24
C2
page 5/10
Tip :
Use a hammer in case dowels
are hard to install by hand.

3)
4)
A1 4,0x30 6
A1
02
03
06 04
05
A1 A1
A1 4,0x30 5
A1
01
A1
A1
A1
A1
A1
A1 04
page 6/10
Attention: There are no
predrilled holes for the
A1 screws on part 01.
Attention: There are
no predrilled holes
for the A1 screws on
parts 02 and 03.

G1
G1
5)
6)
ü
!
G1
û
!
G1
ü
!G1
G1
G1 10x10 2
G1
G1 10x10 2
G1
G1
!
ü
G1
!
G1
û
page 7/10
Make sure back panels are perfectly aligned with
side panels and top and there are NO gaps.
07
07

7)
8)
G1 10x10 10
A4
A4
A4 3,5x14 2
G1
G1
G1
G1
G1
G1
G1
G1
G1
G1 G1
G11 4
A4
page 8/10
Attention: There are no
predrilled holes for the A4
screws on parts 06 and 07.
07
07
06

9)
3,5x14
A4 4
A4 A4
A4
A4
A4
10)
A1 4,0x30 16
2x
10
09
08
11
12
page 9/10
Attention: There are no
predrilled holes for the A4
screws on parts 02 and 03.
Attention: There are
no predrilled holes
for the A1 screws on
part 08.

11)
13)
12)
H4 2
A25 M4x25 2
A25
2x
330mm - 13"
330mm - 13"
E13 2
E14 2
B31 6,0x10 8
Drawer
RIGHT
Drawer
LEFT
2x
B31
E13
H4
page 10/10
Flip the assembled drawer
upside down to install glides.