GRASS VALLEY 8943RDA User manual

Specifications Ordering Information
J9
Input Equalizer
Reclock Bypass
Reclocker
J1
J2
J3
J4
J5
J6
J7
J8
J1 J2
J3 J4
J5 J6
J7 J8
J9 J10
Out
Out
Out
Out
Out
Out
Out
Out
Not Used
In
89003E-R
318943RDA SD/HD/3G Reclocking Distribution Amplifier
Supported Frame Types
GeckoFlex frame
Power Rating
2.7 Watts – single slot
Inputs
SD/HD/3G-SDI: One electrical input (J9)
•Inputequalization(Belden1694Acable)
90m for 3 Gb/s (Input 1)
140m for 1.5 Gb/s
400m for 270 Mb/s
•Returnloss:>15dBupto1.5Gb/s,
10 dB (typical) up to 3 Gb/s
Formats supported:
•SD-SDI
•HD-SDI
•3G-SDI
•DVBASI
Outputs
SD/HD/3G-SDI: Eight reclocked electrical outputs
•Returnloss:>15dBupto1.5Gb/s,
>10 dB (typical) up to 3 Gb/s
•Signallevel:800mV±10%
•Outputjitter(forinputsconformingtoSMPTE259M
and 292M standards):
<0.2 UI >100 kHz for 3G
<0.2 UI >100 kHz for HD
<1.0 UI 10 Hz – 100 kHz for HD
<0.2 UI 10 Hz – up for SD
DVB ASI: Eight non-inverted outputs
Distribution
Reclocking: Active/bypass
Input format selection: Auto/manual
Electrical length (input to output latency in ns):
CH1: Input J9 to Output J1:
3G: Reclocked: 3.8 ns, Bypassed: 3.55 ns
HD: Reclocked: 4.0 ns, Bypassed: 3.6 ns
SD: Reclocked: 6.0 ns, Bypassed: 4.0 ns
Control and Monitoring
SNMP: Yes
Web page configuration: Yes
Local configuration: Yes
Newton support: Yes
NetConfig support: Yes
NetCentral support: Yes
This module can be mounted in a GeckoFlex
frame but not in other 8900 series frames
including Gecko-A or Gecko-V frames.
8943RDA
SD/HD/3G-SDI reclocking distribution amplifier, front
and rear module set
For detailed specifications, installation, and setup
instructions see:
www.grassvalley.com/docs/modular
Key Features
Reclocking SD-SDI, HD-SDI, and 3G-SDI•
distribution amplifier
Auto or manual input format selection•
Supports rates up to 1080p•
Single 1x8 DA•
100% DVB ASI compliant•
High density (up to ten 1x8 DAs per 2 rack•
unit)
Remote control and monitoring via•
Ethernet frame interface
Applications
Distributing HD/3G signals or mixed HD/3G•
and SD format installations
Installations where an SD to HD/3G update•
is planned
Installations where highest density is•
required at the lowest cost
The 8943RDA is an SD/HD/3G-SDI reclocking
distribution amplifier with one electrical input
feeding eight reclocked electrical outputs. The
module is completely DVB ASI compliant.
This module can distribute HD/3G-SDI or
SD-SDI, making it ideal for mixed-format
applications or installations where an upgrade
to HD/3G is planned. Cable equalization is up
to 90 meters for HD/3G-SDI and 440 meters
for SD-SDI.
All parameters can be configured directly
from the card edge or via a standard HTML
Web browser when the 8900NET (Net Card)
Network Interface module has been installed.
The module operation and configuration, as
well as the signal presence and format, can
be monitored using industry standard SNMP
protocol via the 8900NET (Net Card) module.