Green Strike Mosquito Preventer Featuring Zero-Hatch... User manual

This mosquito control device is intended to trap mosquito eggs and helps to
reduce the overall mosquito population. Maxtech Mosquito Control Inc does not
guarantee a complete elimination of mosquito populations in your area. Mosqui-
toes have the ability to transmit west nile virus, dengue fever and other diseases.
Maxtech Mosquito Control Inc cannot guarantee the complete elimination of
these viruses from your living areas. The Mosquito Preventer is intended to aid in
the reduction of mosquito populations.

How does it work?
How do I set it up?
Where should I place it?
How do I know it’s working?
Maintenance
Troubleshooting/Diagnostics
Part Breakdown
Primer
Culex Primer
Aedes Primer
[phone]

Culex
Aedes
X
X
Pump
Instructions
Latch
Drain handle
Landing Strips
Breeding Zone
Bottom Reservoir
Water Level
Indicator
Drainage
Spout

Culex
Aedes
DO NOT PUT BOTH PRIMERS TOGETHER
&
Foot Note:
Culex - Use in Spring Season
Aedes - Use in Summer Season

(909 - Culex | 910 Aedes)
Aedes
Culex
Aedes
Culex
Culex
Aedes
Aedes
Culex
For common Q & A Questions
Visit Green-strike.com or follow us on twitter @green_strike

Cycle the primed water using the manual pump from bottom reservoir to the
breeding zone.
Pull the drain handle to flush the solution into the bottom reservoir from the
breeding zone.
Repeat the process twice and fill the breeding zone to the marked level
Cover the Breeding Zone with lid
4
5
6
7

NOTES

Cycle the primed water from bottom reservoir to the breeding zone using manual
pump.
Push the drain handle to flush the solution into the bottom reservoir from the
breeding zone.
Repeat the process twice and fill the breeding zone to the marked level
Cover the Breeding Zone with lid
8.
Primed water MUST be cycled through the system every four days
9.