Green Strike Mosquito Preventer User manual

Invented, Designed, & Tested in Canada www.greenstikeinternational.com
OWNER’S MANUAL

• This owner’s manual contains important information necessary for the proper assembly and safe use of this product.
• Read and follow all warnings and instructions before assembling and using the product.
• Keep this manual for future reference.
• AVOID all contact with eyes, ears, nose and mouth, throughly wash contacted skin. Keep out of reach of children and animals.
Avoid inhaling or ingesting.
• For outdoor use only! Do NOT use indoors!
• Store all reactors in a cool, dry place away from any source of intense heat or moisture. Dispose of reactors in a trash receptacle.
• Do NOT empty water from Breeding-Zone in wet areas around your yard.
This mosquito control device is intended to trap mosquito eggs and help to reduce the overall mosquito population. Maxtech
Mosquito Control Inc. does not guarantee a complete elimination of mosquito populations in your area.
This is a pest control solution and is to be used only in accordance with the directions on the label. The user assumes the risk to
persons or property that may arise from such use of this product.
Be diligent. Watch the news. Stay updated on potential mosquito diseases in your area. Never use multiple attractants in the same
unit.
SAFETY INFORMATION:
and its parties warranties to the original purchaser that this product is free from defective materials and workmanship.
This warranty is limited to remedy any defective part for a period of one year from the date of the original purchase. Retain your
original receipt as proof of purchase. This warranty does not apply to electrical components, nor to, in our judgment, misuse or
abuse. If this unit has been altered, no warranty is in force. In no case shall or its parties be liable for any accidental,
punitive, consequential or any other damages of any kind for breach of this or any other warranty, expressed or implied.
Register your warranty online through www.greenstrikeinternational.com/register.
WARRANTY:
WARNINGS:
NOTICE TO USER:
Now that you have purchased a Mosquito Preventer, you are on your way to preventing mosquitoes in your outdoor
living areas. Just a reminder that the Mosquito Preventer works great at reducing “second generation” mosquitoes that otherwise
would be multiplying in your backyard.
Please carefully read through this manual to understand how to use and maintain this device.
ABOUT YOUR MOSQUITO PREVENTER
1x Automatic Mosquito Preventer
1x Rain guard
1x Reactor
2x Landing Strips
8x AA Batteries
1x User Manual
INCLUDED IN BOX:
Reactor With
Attractant
Automatic Mosquito Preventer
Rain guard
AA Batteries
Landing Strips

Step 1: Open the box and remove product and all its parts
from packaging.
Step 4: Place batteries into the battery pack. Replace the
back panel and screws.
Step 2: Remove back drawer, peel reactor sticker off.
HOW TO SETUP YOUR MOSQUITO PREVENTER FOR THE FIRST TIME
Step 5: Replace the back drawer into the Mosquito Preventer. Step 6: The power button will be continuously blinking, this
indicates that the Mosquito Preventer is in Maintenance
Mode.
Step 7: Remove lid and umbrella. Fill the preventer with 3.2L
of either rain or distilled water. Check the water level
through the viewing window. Green means a good
water level, red means a bad water level and needs to
lled with more water.
Step 8: Replace umbrella. Replace lid securely back onto the
preventer. Attach the rain guard onto the preventer.
Step 9: Attach the landing strips to the Mosquito Preventer in
the indicated places.
Step 10: Press the power button for 1 second and release to
reset the Mosquito Preventer.
Step 3: Remove the screws holding the back panel in place
and remove the back panel.
3.2L
Remove
Before
Use

Follow these steps:
MONTHLY MAINTENANCE (EVERY 30 DAYS)
Every 30 days we recommend you replace certain elements of the Mosquito Preventer. Ask the retailer, or place where you
purchased your unit if they carry the Reactor Kits.
WEEKLY MAINTENANCE
Check water level of the Mosquito Preventer through the viewing window. If green the water level is good, if red more water needs
to be added to the system. To add more water remove the rain guard, lid and umbrella and then add water to the breeding zone
until the green bobber appears in the viewing window. Return the umbrella, lid and rain guard securely back onto the Mosquito
Preventer.
Your Mosquito Preventer is now set up. The system will rinse once before starting its automatic cycling schedule.
END OF SEASON MAINTENANCE
Follow steps 1 and 3 from the monthly maintenance and remove the batteries. Wash, dry and store the Mosquito Preventer in an
upright position and in a dry place.
1. Put Mosquito Preventer into Maintenance Mode by pressing the power button and holding it for 3-5 seconds. The light will start
blinking, and the valve will open and drain the water.
2. Replace the reactor. Remove the previous month’s reactor and peel off the label on the new reactor.
3. Drain the water from the bottom by removing the grommet. When fully drained return the grommet back into the bottom.
*See note in WARNINGS, page 1 for draining area
4. Rell the Mosquito Preventer with 3.2L of either rain or distilled water (to prevent calcium buildup).
5. Replace both of the landing strips and repeat step 10 of setup instructions.
Grommet
TROUBLESHOOTING
PROBLEM
INDICATES# OF FLASHES
VALVE MOTOR2
3
4
5
PUMP
LOW BATTERY
PCB
POSSIBLE CAUSE SOLUTION
SOLUTION
My unit will not Start/Turn On
Batteries are dead or low
Defect in power system
Replace batteries
Contact www.greenstrikeinternational.com
Remove batteries and replace with new batteries
Contact www.greenstrikeinternational.com
Contact www.greenstrikeinternational.com
Contact www.greenstrikeinternational.com
The unit has not fully adjusted to your
environment
Your unit may not be in the right location in
your yard
The attractant has fermented This is normal
It may take up to 1 month to see noticeable
results as the unit works to kill off future
mosquito generations
Move your unit in an area with lots of shade,
wind protection and lots of vegetation
I still see lots of mosquitoes
around my living area
There is a smell coming from
the unit
POWER BUTTON DIAGNOSTICS
When the Mosquito Preventer encounters an error, it will stop all operations and ash the power button in a specic way to let
the user know what part of the preventer has failed. It will ash a different number of times for each error followed by a 5 second
pause. It will repeat this sequence until the error has been resolved and the system has been reset. To manually reset the system
remove the batteries for 3 seconds.
See the below diagnostic errors codes, contact us at www.greenstrikeinternational.com for additional help.