Green Sun LED Aquarium Lights User manual

Intelligent aquarium led light
manual
Shen Zhen Green Sun optoelectronic Co., Ltd

Group A
brightness
Group B
brightness
Group C
brightness
Time
Time
Time
Time
Status
Time: Hour: minute: Second On, off, working, Bro
Brightness: 0~99%
Lamp turn on
and off
Set setting as
working
Review programme
settings
Time setting
Programme setting
Data adjustment
Programme control panel introduction

Time setting
Time setting
Time setting
Time setting
Press to turn on
the lamp, then press
The lamp will be in working
status
Press , the LCD screen
will as fig 1 , first hour is active,
press to add value to
the target hour, the hour point
already be set
Press , the minute will
activated, press to set
minute fig 3

Same procedure on second setting
After setting all items, press , the
lamp will run with set time

Programme setting
Programme setting
Programme setting
Programme setting
Adjust the lamp into working status,
then press , LCD screen will
show as fig v.
Press , the hour will be active
that means user can set programme
for this time.
Press , A will be active, can set
any value according to user request ,
with pressing to target value,
see fig 5 , press , activate B
Press to set value to target for B

After setting B, press to activate
C , press to the target value for C.
After setting these three groups
brightness, press , back to hour
Press ,adjust time to next hour
Set brightness for A, B, C groups for
this hour. With same way, set
A, B, C groups for 24 hours.
Every setting is saved after press

Programme browse
Programme browse
Programme browse
Programme browse
User press , can browse the
Programme of all hours.
Press one time , the time will change
by hours.
Green Sun suggest user set
programme, then review all hours
programme, at last , set current time
More information , pls contact Green
Sun