greenhouse sensation Hydropod Propagator Quick guide

Hints, tips and special offers
search ‘Greenhouse Sensation’
‘Like’ Us
01695 554 097
www.GreenhouseSensation.co.uk
All our Propagators are
Made in England
Any Questions? Contact us
We are here to help you to get the best from your cuttings, so if you have any
questions about your Greenhouse Sensation Hydropod or the plants you
are growing please feel free to contact one of our Gardening Angels on:
Call: 01695 554 097 Email: [e-mail]
Watch our advice videos
on our website and Facebook
HYDRO120_INS_1012 GS1000/GS1001

Hydropod Propagator - 120 Cuttings
Assembly and Maintenance
Instructions
GS1000/GS1001

Welcome
Welcome to Greenhouse Sensation and thank you for
ordering your Hydropod.
The Hydropod Propagator gives you fast results
The mist provides the plants with constant access to
water and nutrients.
No Guessing
Roots are visible so root growth can
be checked without disturbing
the plants.
Healthier Plants
No soil means no soil-borne pests
and diseases. This means that
the roots grow faster and stronger
because they have access to
everything they need. It also reduces
root rot or drying out.
Greater Control
Large vents give greater control over
temperature and humidity.
Less Fuss
Top the reservoir up with water and
add nutrient when cuttings start to
root - instead of having to water
dozens of separate pots each day.
If you want to share your results with us and fellow
Greenhouse Sensation growers visit our website and
facebook page to post your photos, comments or
questions. We love to hear how your plants are getting
on in a Greenhouse Sensation Propagator.
Visit us at www.GreenhouseSensation.co.uk
for reviews, tips and news.
Hints, tips and special offers
search ‘Greenhouse Sensation’
‘Like’ Us

Summary of Nutrient Programme
Remember the following simple steps to successful propagation.
STEP 1 Place cuttings in the Hydropod Propagator, at this point only water is in the
reservoir - until cuttings show signs of growth.
STEP 2 When roots appear and when the top of the plant have shown signs of
growth, top the water up to the level of the spray bar in the reservoir - add
3ml of A nutrient and 3ml of B nutrient for every 1litre of water in
the reservoir.
This reservoir holds 64 litres. If you are filling the reservoir to the spray bar
with water, you need to add 192ml of nutrient A, followed by 192ml of
nutrient B.
STEP 3 Transplant the cuttings when you have healthy roots, as outlined in the
image on the previous page.
The above feeding programme is based on Greenhouse Sensation nutrients.

Guidance and Tips for successful use of the Hydropod
LIGHT
Cuttings should not be placed in direct sunlight, although you can use the hydropod
in conjunction with propagation lights if growing indoors.
HEAT
A consistent temperature is required. The optimum temperature required by cuttings
is 18-22oC. You need to place your Hydropod Propagator somewhere which
maintains this temperature, or you can place the optional heater in the reservoir.
For successful transplanting you need healthy young plants with abundant white
roots visible. This picture shows what your plants will look like when they are ready to
be transplanted.
When are my Plants Ready?

Component List for Hydropod Propagator
1 x Reservoir 3 x Support Trays
1 x Propagator Lid
1 x Submersible Pump
(including Stand)
1 x Optional Heater
1 x Instruction Manual
120 x Sponge Discs
1 x Nutrient Pack
1 x Spray Assembly

For best results use tap water. If you are in a very hard water area, you can use part rainwater.
Assembly Instructions for Hydropod Propagator
1. Place the reservoir on a level surface. Using the suckers,
push the optional heater to the bottom of the reservoir
nearest the corner that has the groove to feed the power
cable through. For operational heater instructions,
please see the additional manual supplied with the heater.
2. Push the bottom of the stand onto the pump and
attach the three suckers. Push the sponge filter onto
the end of the pump.Insert the adaptor on the spray
assembly onto the pump outlet. This is a tight fit to
improve stability when operational.
3. Rest the spray assembly on the grooves in either end
of the reservoir and push the pump to the bottom of
the reservoir using the suckers provided.
4. Fill the reservoir with water to the level of the spray
assembly. Briefly test by plugging the pump in. Either
use luke warm water or cold water from the tap which
has been left to reach room temperature.
5. Place the support trays in position.
ELECTRICAL SAFETY FIRST
1. Ensure that your electricity supply incorporates an RCCB protection devise,
or alternatively use a socket mounted RCCB power breaker unit.
2. Ensure pump and heater if employed, are connected in accordance with manufacturers’ instructions.
3. Always switch off electricity supply before making contact with nutrient solution in reservoir.

Propagation Instructions for Cuttings
1. If using gel type rooting hormone, dip the cutting
first. Slide the cutting into the sponge disc using the
slit to avoid damaging the cutting. At least 2cm of
the stem should show below the sponge.
2. Place the sponge disc on top of the lip of the
support tray.
3. Put the propagator lid in place. Switch on the
sprinkler and run continuously.
When roots are visible top up the tank (if necessary)
with water and add nutrients (3ml of A nutrient
followed by 3ml of nutrient B for every 1 litre of water
in the tank).
The nutrient dilution rate is based on Greenhouse Sensation™ nutrients. Should you
wish to use any other brand of hydro nutrient you may need to seek advice from the
supplier or retailer.