GREISINGER G 1110 User manual

Quick reference guide
G 1110
barometer | altimeter
EN

Table of contents
G 1110
2 / 18
B-H88.0.01.DK2-1.1
Table of contents
1 About this documentation......................................................3
1.1 Purpose of the document................................................................3
1.2 Legal notices..................................................................................3
1.3 Further information.........................................................................3
2 Safety.......................................................................................4
2.1 Explanation of safety symbols ........................................................4
2.2 Foreseeable misuse .......................................................................4
2.3 Safety instructions..........................................................................5
2.4 Intended use...................................................................................5
3 The product at a glance..........................................................6
3.1 The G 1100 barometer series.........................................................6
3.2 Display elements............................................................................6
3.3 Operating elements........................................................................7
4 Operation.................................................................................8
4.1 Opening the configuration menu.....................................................8
4.2 Open the adjustment menu...........................................................10
5 Measurement Basics.............................................................11
5.1 Special functions ..........................................................................11
5.1.1 NVLL Tare function / Altimeter altitude adjustment..........................11
5.1.2 AVR0:02 / AVR0:05 / AVR0: 10........................................................11
5.2 Use of the trend indicator..............................................................12
5.2.1 Meteorology: weather forecasting.................................................12
5.2.2 Hiking, cycling, flying, motor sports: use as a variometer..............13
6 Operation and maintenance.................................................14
6.1 Battery..........................................................................................14
6.1.1 Battery indicator............................................................................14
6.1.2 Changing battery..........................................................................14

G 1110
Table of contents
B-H88.0.01.DK2-1.0
3 / 18
7 Error and system messages.................................................15
8 Technical data .......................................................................16
9 Service ...................................................................................18
9.1 Manufacturer................................................................................18
1 About this documentation
1.1 Purpose of the document
_
–This document is intended as a quick reference option.
–It does not replace the operating manual.
–For this reason, read the operating manual before operating the product for the
first time.
1.2 Legal notices
This document is entrusted to the recipient for personal use only. Any impermissible
transfer, duplication, translation into other languages or excerpts from this operating
manual are prohibited.
The manufacturer assumes no liability for print errors.
1.3 Further information
_
Software version of the product:
–V1.1 or later
_
Link to the complete operating manual:
_
http://www.greisinger.de
For the exact product name, refer to the type plate on the rear side of the product.

2 | Safety
G 1110
4 / 18
B-H88.0.01.DK2-1.1
2 Safety
2.1 Explanation of safety symbols
_
DANGER
This symbol warns of imminent danger, which can result in death, severe bodily injury,
or severe property damage in case of non-observance.
_
CAUTION
This symbol warns of potential dangers or harmful situations, which can cause damage
to the device or to the environment in case of non-observance.
_
NOTE
This symbol indicates processes, which can have a direct influence on operation or
can trigger an unforeseen reaction in case of non-observance.
2.2 Foreseeable misuse
_
The fault-free function and operational safety of the product can only be guaranteed if
applicable safety precautions and the device-specific safety instructions for this docu-
ment are observed.
If these notices are disregarded, personal injury or death, as well as property damage
can occur.
DANGER
Incorrect area of application!
In order to prevent erratic behaviour of the product, personal injury and property
damage, the product must be used exclusively as described in the chapter Description
in the operating manual.
–The product is not suitable for use in explosion-prone areas!
–The product must not be used for diagnostic or other medical purposes on pa-
tients!
–For measurements requiring devices that are subject to authorisation or special
approvals, this product is not a substitute for such products and can only be used
as an aid in preparatory or comparison measurements!

G 1110
Safety | 2
B-H88.0.01.DK2-1.1
5 / 18
_
2.3 Safety instructions
_
NOTE
This product does not belong in children's hands!
2.4 Intended use
_
_
_
The device measures the absolute pressure in the air.
The ambient pressure is measured directly via the integrated sensor. Pressure equali-
sation between the unit and the environment takes place via a water-impermeable
membrane on the front side.
Applications include:
-Barometric measurements (e.g. weather)
-Elevation determination
The device must only be used under the conditions and for the purposes for which it
was designed.
It must be handled with care and used according to the technical data (do not throw,
strike, etc.). Suitable measures must be used to protect the pressure equalisation
opening and be protected from dirt.
.

3 | The product at a glance
G 1110
6 / 18
B-H88.0.01.DK2-1.1
3 The product at a glance
3.1 The G 1100 barometer series
LCD Display
Front view
Top view
3.2 Display elements
_
Display
_
Battery indicator
Evaluation of the battery status
_
Unit display
Display of the units or Min/Max/Hold information
text
_
Main display
Measurement of the current pressure or value for
min/max/hold
_
Auxiliary display
Measurement of the current pressure in
Min/Max/Hold mode
_
Bar display
Trend display in 7 steps
■□□□ / ■■□□ / □■□□ falling
(strong / medium / slight)
□■■□ stable
□□■□ / □□■■ / □□□■ rising
(slight / medium / strong)
_

G 1110
The product at a glance | 3
B-H88.0.01.DK2-1.1
7 / 18
3.3 Operating elements
_
On / Off button
Press briefly
Switch on the product
Activate / deactivate lighting
Long press
Switch off the product
Reject changes in a menu
_
Up / Down button
Press briefly
Display of the min/max value
Change value of the selected parameter
Long press
Reset the min/max value of the current measure-
ment
Both simultaneously
Rotate display, overhead display
_
Function key
Press briefly
Freeze measurement (Hold)
Return to measurement display
Call up next parameter
Long press, 2s
Start menu configuration, (ONF appears in the
display
Close menu, changes are saved
Long press, 4s
Depending on the selected special function: Activa-
tion of the Tare function NVLL or rapid measurement
with mean value AVR

4 | Operation
G 1110
8 / 18
B-H88.0.01.DK2-1.1
4 Operation
4.1 Opening the configuration menu
1. Press the Function key for 2 seconds to open the Configuration menu.
2. (ONF appears in the display. Release the Function key.
_
Parameter
Values
Meaning
_
Display unit
UN,T
HPa
Barometer in [hPa]
mBaR
Barometer in [mbar]
PSI
Barometer in [psi]
mmKG
Barometer in [mmHg]
m
Altimeter/Elevation display in [m]
FT
Altimeter/ Elevation display in [feet]
_
Activatable special functions
NVLL
Function key
At barometer display: tare function
At altimeter display: setting the altitude
AVR 0:02 / AVR
0:05 / AVR 0: 10
Rapid measurement with mean value over 2 s / 5 s
/ 10 s activatable
_

G 1110
Operation | 4
B-H88.0.01.DK2-1.1
9 / 18
Measuring rate
RATE
Selection of the measurement speed
SLO
Slow
FAST
Fast (not recommended for altimeter display)
_
Nautical norm correction
SEA.L
NO
Inactive, display measured air pressure directly
YES
Active, display air pressure compensated to sea
level
ALT,
-500 .. 9000
Height above sea level in m for correction
_
Trend display
TEND
OFF
Bar display and tendency value display deactivated
1_S /60_S
Time base for bar display 1 second (0.2 hPa / bar
level corresponds to ~1.7 m / 5 ft at sea level) or
60 seconds (12 hPa / bar level corresponds to ~100
m / 328 ft at sea level)
1_H /3_H
Time base for bar display 1 hour (1 hPa / bar level)
or 3 hours (3 hPa / bar level) for usual meteorologi-
cal assessments.
The value will be renew every minute.
_
Additional information
LCD.2
OFF
No additional information in auxiliary display
°(
Temperature in °C
°F
Temperature in °F

4 | Operation
G 1110
10 / 18
B-H88.0.01.DK2-1.1
With activated TEND –display additionally:
TEND
Trend value
°(.TE
Temperature in °C and trend value
°F.TE
Temperature in °F and trend value
°(.P.T
Temperature in °C, trend value and air pressure
(only available at altimeter display units)
°F.P.T
Temperature in °F, trend value and air pressure
(only available at altimeter display units)
_
Shut-off time
POFF
OFF
No automatic shut-off
0:15 0:30 1:00 4:00
12:00
Automatic shut-off after a selected time in hours
and minutes, during which no buttons have been
pressed
_
Backlight
L,TE
OFF
Backlight deactivated
0:15 0:30 1:00 4:00
Automatic shut-off of the backlight after a selected
time in minutes and seconds, during which no
buttons have been pressed
ON
No automatic shut off of the backlight
_
Factory settings
IN,T
NO
Use current configuration
YES
Reset product to factory settings. IN,T DONE appears
in the display
4.2 Open the adjustment menu
For information refer to the operating manual!

G 1110
Measurement Basics | 5
B-H88.0.01.DK2-1.1
11 / 18
5 Measurement Basics
5.1 Special functions
_
With the special functions that can be selected via the Configuration menu, the device
can be optimised for special measuring tasks. After it is switched on, the device starts
up in standard measuring mode, the relevant special function is started by pressing
and holding the Function key for 4 s.
5.1.1 NVLL Tare function / Altimeter altitude adjustment
The special function FVNC NVLL has been selected in the configuration menu.
Barometer display: The display can be zeroed by pressing the Function key for 4 s. If
the tare function is activated, NVLL blinks in the lower display. The
tare function can be reset by pressing the Function key again for 4
s.
Altimeter display: In the altimeter operating mode, after calling up the tare function,
the user is prompted to enter the current altitude.
NOTE
The tare function is independent of the zero point correction accessible via the settings
menu.
5.1.2 AVR0:02 / AVR0:05 / AVR0: 10
Fast measurement with mean value over 2 s / 5 s / 10 s
Mean value mode for measurement of heavily fluctuating pressures.
In the Configuration mode, a special function AVR0:02, AVR0:05 or AVR0: 10 has been
selected.
By pressing and holding the Function key for 4 s. the measurement with mean value
can be activated.
The different mean value times of 2, 5 or 10 seconds can be selected depending on
the requirement.
_
The first parameter is shown in the auxiliary display.
_
If the Tare function is activated when called up, this special function AVRcan be reset
by pressing and holding the Function key for 4 s. In order to reactivate the Tare, the
special function must be switched in the configuration menu.

5 | Measurement Basics
G 1110
12 / 18
B-H88.0.01.DK2-1.1
5.2 Use of the trend indicator
5.2.1 Meteorology: weather forecasting
Observation of variable weather conditions by assessing the rate of change of air
pressure.
To do this, set the device to:
UN,T
HPa
(international standard)
FVNC
NVLL
(no signification)
RATE
SLO
(power saving during continuous operation)
SEA.L
YES
ALT,
altitude of the location above sea level
TEND
1_Hor
3_H
1 hour (1 hPa / bar level)
or 3 hours (3 hPa / bar level)
LCD.2
°(.TE
POFF
OFF
continuous operation
This results in the following display, for example:
display unit hPa
current pressure at sea level
trend: + 0,4 hPa per hour
□■■□ stable (trend lower 1 hPa)

G 1110
Measurement Basics | 5
B-H88.0.01.DK2-1.1
13 / 18
5.2.2 Hiking, cycling, flying, motor sports: use as a variometer
A variometer or inclinometer indicates the change in altitude per unit of time, i.e. the
rate of ascent or descent. Common units are [ft/min] or [m/s] for flight and motor
sports, or [m/h] for example in hiking/running.
NOTE
The output value of the tendency display in the setting 1_S or 60_S shows the current
value for the tendency based on the measurements of the last 5 seconds, scaled to the
selected setting. In the 60_S setting, the resolution is reduced to 1 m or 5 ft.
To do this, set the device to:
UN,T
FT or m
(Altimeter)
FVNC
NVLL
for convenient correction of the current altitude
RATE
SLO
(power saving during continuous operation)
SEA.L
NO
TEND
1_Sor
60_S
(time base 1 second for m/s or
60 seconds for ft/min)
LCD.2
TEND
or for more information: °(.P.T or °F.P.T
POFF
OFF
continuous operation
This results in the following display, for example:
display unit m or m/s
current altitude above sea level
trend: - 2.8 m per s
□■□□ slightly falling

6 | Operation and maintenance
G 1110
14 / 18
B-H88.0.01.DK2-1.1
6 Operation and maintenance
6.1 Battery
6.1.1 Battery indicator
_
If the empty frame in the battery display blinks, the batteries are depleted and must be
replaced. However, the device will still operate for a certain length of time.
If the BAT display text appears in the main display, the battery voltage is no longer
adequate for operation of the product. The battery is fully depleted.
6.1.2 Changing battery
_
Only use new, high-quality and suitable alkaline batteries!
For additional information, refer to the operating manual!

G 1110
Error and system messages | 7
B-H88.0.01.DK2-1.1
15 / 18
7 Error and system messages
Display
Meaning
Possible causes
Remedy
----
Calculation not
possible
Measurement data
acquisition is run-
ning
Waiting for data collection
No display,
unclear
characters
or no re-
sponse
when but-
tons are
pressed
Battery depleted
System error
Product is defective
Battery depleted
Error in the product
Product is defective
Replace battery
Send in for repair
BAT
Battery depleted
Battery depleted
Replace battery
BAT LO
Battery depleted
Battery depleted
Replace battery
ERR.1
Measuring range
exceeded
Measurement too
high
Product is defective
Stay within allowable meas-
urement range
Send in for repair
ERR.2
Measuring range is
undercut
Measurement too
low
Product is defective
Stay within allowable meas-
urement range
Send in for repair
ERR.3
Display range has
been exceeded
Incorrect display unit
Value not displaya-
ble
Correct setting
ERR.4
Display range has
been undercut
Incorrect display unit
Value not displaya-
ble
Correct setting
SYS ERR
System error
Error in the product
Switch product on/off
Replace batteries
Send in for repair

8 | Technical data
G 1110
16 / 18
B-H88.0.01.DK2-1.1
8 Technical data
Measuring range
Barometer
300,0 .. 1100,0 hPa (mbar) abs.
4,350 .. 15,950 PSI abs.
225,0 .. 825,0 mmHg (Torr) abs.
Altimeter
-500,0 .. 9000,0 m
-1640 .. 19999 ft.
Temperature
-20,0 .. 50,0 °C
-4,0 .. 122,0 °F
Accuracy
Barometer
± 1 hPa typical (at T: 0 .. 30 °C)
± 0,25 % FSS max. corresponds to ± 2 hPa
Altimeter
typ. ± 1 m relative (over a short period at constant
ambient pressure @ 25°C)
Temperature
typ. ± 0,5 °C @ 25°C
Measuring cycle
FAST: approx. 10 measurements per second
SLO: approx. 1 measurement per second
Overload
4000 hPa abs.
Pressure connection
No connection, integrated sensor
Pressure equalisation via diaphragm-protected opening
Display
3-line segment LCD, additional symbols, illuminat-
ed (adjustable white, permanent illumination)
Standard function
Min/Max/Hold
Auto-power-Off function / if activated, switches the
product off automatically
Trend display, time base selectable (1s, 60s, 1h, 3h)
Only with altimeter function:
The altitude metres covered are calculated (ascent
AS(, descent DES(, resolution 1m)
Additional functions
NVLL: Tare function
AVR: Averaging over 2 s / 5 s / 10 s
As altimeter: switchable variometer display with
units ft/h, m/s, m/h

G 1110
Technical data | 8
B-H88.0.01.DK2-1.1
17 / 18
Calibration
Zero point and gradient adjustment
Housing
Break-proof ABS housing
Protection rating
IP67
Dimensions
L*W*H [mm] and
weight
108 * 54 * 28 mm without pressure connector
140 g, incl. battery
Operating conditions
-20 to 50 °C;
0 to 95 %RH (short-term condensation possible)
Storage temperature
-20 to 70 °C
Current
supply
2*AA battery (included in the scope of delivery)
Current require-
ment/
Battery life
approx. 0.4 mA (slow measurement SLO)
Operating time approx. 6000 h
Battery indicator
4-stage battery status indicator,
Charge indicator for low charge level: "BAT LO"
Auto-power-OFF function
The device switches off automatically if this is
activated
Directives and standards
The devices conform to the following Directives of
the Council for the harmonisation of legal regula-
tions of the Member States:
2014/30/EU EMC Directive
2011/65/EU RoHS
Applied harmonised standards:
EN 61326-1:2013 Emission limits: Class B
Immunity according to Table 1
Additional error: < 1 % FS
EN 50581:2012
The device is intended for mobile use and/or
stationary operation in the scope of the specified
operating conditions without further limitations.
_
_

9 | Service
G 1110
18 / 18
B-H88.0.01.DK2-1.1
9 Service
9.1 Manufacturer
If you have any questions, please do not hesitate to contact us:
GHM Messtechnik GmbH
GHM GROUP - Greisinger
Hans-Sachs-Str. 26
93128 Regenstauf | GERMANY
Email: [e-mail] | www.greisinger.de
WEEE reg. no. DE 93889386
Contact