Griffin Technology XX-396A User manual

www.Griffin-Stands.com
Double Studio
Mixer Stand
www.Griffin-Stands.com
www.Griffin-Stands.com
Griffin™stands and accessories are manufactured
in several innovative factories responsible for
developing products that address the newest
needs and trends of the current market. We take
pride in the Griffin™brand and endeavor to be on
the forefront of the musical stands and musical
and lighting accessories market.
Performance Issue, Uneven or Unstable- Make
sure all nuts and bolts are tight on the product. If they
are, then loosen all nuts and bolts 1 full turn counter-
clockwise, then go back and tighten each bolt only ½
turn tight. Then do a final tighten turn for another ½
turn tight. Next, Make sure there are not any missing
nuts or bolts. Third, ensure all parts on the product
are not broken or defective. Finally, Re-read the
assembly instructions or watch the product
demonstration video to ensure you have correctly
assembled or are using the product properly with
factory specifications.
Missing Parts- The pictures, videos and images
shown in this manual might have changed style or
count due to the product being redesigned. So in rare
cases the part may no longer be included or of a
different style. However, if you think you are missing
a part that is necessary to the assembly and use of
your product, then first carefully double check all
packaging for any parts you think are missing. Some
parts might be hiding in the packaging or loose in an
inner box.
User Manual
M o d e l # X X - 396A
Griffin | 11408 Hwy 64 W, Tyler, TX 75704 |
[e-mail] | www.Griffin-
Stands.com
For current product specifications, please to go
www.griffin-stands.com and type the model number
into the search bar. Locate the product listing to view
the current factory specifications. Thank you for purchasing the Griffin Double Studio
Mixer Stand. Your product comes with a 1 year
factory warranty from purchase date. Please read all
assembly instructions prior to assembling your new
cart. Pictures that may aid in assembly can be found
by going to www.griffin-stands.com and typing XX-
396A into the search bar.

Step 4 –Loosen the
knob where the arms
attach to the bracket
to widen the top
brackets. Use the
knob at the top of the
arms to adjust the tilt
of the arms as seen in
FIGURE 5.
Step 6 –For safety reasons, please always make sure to
test the stability and safety of the product before use.
Double check all nuts and bolts, knobs and connectors,
make sure that these are tight and securely fastened
before use of your product. Test the product under light
use or light loads the first time to confirm assembly and
structure of the product is correct.
Step 1 –Locate the leg
assembly within Part A
(main frame) and as seen
on FIGURE 1, unfold the
legs of the stand until
they lock into place.
Step 2 –Insert the chrome legs into the table top (Part
D). Extend the legs to the desired height and screw the
knob (Part E) into the threaded hole as seen in FIGURE 2.
If the table is slightly off level, you can unscrew the feet
to make the table level. Extend the table to your desired
width and lock into place by tightening the knobs as seen
in FIGURE 3.
Step 5 –Loosen the small knobs on the arms to adjust
the arms forward and backwards as shown in FIGURE 6.
Tighten the knobs when your desired adjustment is
achieved.
Please scan the QR Code below for the product
demonstration video. Or go to the URL shown here and find
the product video. www.Griffin-Stands.com/Videos
Step 3 –Locate the
pair of arm
attachment brackets
(Part C). Take 1 and
place the bracket with
2 knobs (Part D)on
the crossbar and
tighten the knobs as
shown in FIGURE 4.
Remove the
remaining knobs on
these brackets.
Locate the top arms
and align the holes in
the arm to the
bracket. Insert the
knob and put the
spring back over the
knob. Then screw the
knob back into the
bracket.