GrillPro 13975 User manual
GrillPro® Bluetooth® Thermometer - 13975
OVERVIEW
Display Unit – Front View
*Hardware Requirements: iPhone® 4s (or above) or Bluetooth® v4.0 enabled smart device
*Software Requirements iOS 7 (or above) or Android™ 4.3 (or above)
1. Cook temperature
2. Alert temperature
3. Bluetooth® indicator
4. °C/°F: temperature measurement unit
5. Alerts
6. Pairing indicator
a. SET : enter mode set-up; conrm setting; press and hold for 3 sec to power OFF
b. — : Decrease value of the setting; °C/°F temperature measurement unit
c. + : Increase value of the setting
d. Metal Probe ConnectorWire
e. Silicone sleeve
f. Metal probe
DISPLAY UNIT-REAR VIEW
BATTERY INSTALLATION
1. Remove the battery door.
2. Replace the battery with AAA x 2.
3. Ensure the battery is in place, matching the polarities (+/-) and replace
the battery door.
4. Press RESET after each battery change.
Download the APP
Connect the APP Store and search‘GrillPro’on the following devices:
iPhone®(4S and later)
iPad®(3rd generation and later)
iPad mini™ (all generations)
Download the APP
https://play.google.com/store/apps/details?id=com.bbq.project
Support Android 4.3 and later
BUTTON OPERATION SET BUTTON
Press SET key to wake up.
Press 3 sec the SET key to enter the sleep mode.
Quickly press SET key to enter alarm temperature setting mode.
Quickly press SET key to exit setup.
+ BUTTON
Quickly press + button, the alarm temperature increases.
Press and hold + button, alarm temperature increases rapidly.
— BUTTON
Quickly press — button, alarm temperature decreases.
Press and hold — button, the alarm temperature decreases rapidly.
Short press key — switching temperature mode.
LED BACKLIGHT
LED display 3 colors are green, blue, red.
Screen will illuminate for 10 seconds after pressing any button.
TEMPERATURE MEASUREMENT RANGE
Device measures temperatures from-25°C to 300oC (-13°F to 572°F)
When the temperature is lower than the minimum temperature,“LLL”will display.
When the temperature is higher than the maximum temperature,“HHH”will display.
“----”will display for 3 sec after it is not plugged in.
APP FUNCTION
Automatic or manual searches for Bluetooth® devices. Open APP to enter the pairing screen
beneath the display [search] or [lift] button. Click [search], the APP will automatically nd the
surrounding Bluetooth® devices, automatically connect and enter the temperature display
interface.When Bluetooth® connection fails the main interface [pairing] ashes un-pairing the
device to connect to other devices.
APP MAIN INTERFACE
Display device temperature
Set temperature (prole mode and temperature mode)
Set countdown time (countdown mode)
Menu setting key
Pairing key
Task start (stop) key
SELECT THE MEASUREMENT UNITS
Tap to view the Prole options of food
Tap on your food type
Tap to select cooking degree and temperature, it can be
adjusted up and down 2 degrees
Tap to go back to the previous screen to save.
Carefully plug the meat probe into the bottom socket
Auto Shut-O:
The thermometer will automatically turn o if there is no probe installed.
1. Magnet
2. Reset button
3. Pay feet
4. Battery compartment
d
e
f
1
2
3
4
5
6
abc
1
2
3
4
AAA battery x2
GrillPro® Bluetooth® Thermometer - 13975
OVERVIEW
Display Unit – Front View
*Hardware Requirements: iPhone® 4s (or above) or Bluetooth® v4.0 enabled smart device
*Software Requirements iOS 7 (or above) or Android™ 4.3 (or above)
1. Cook temperature
2. Alert temperature
3. Bluetooth® indicator
4. °C/°F: temperature measurement unit
5. Alerts
6. Pairing indicator
a. SET : enter mode set-up; conrm setting; press and hold for 3 sec to power OFF
b. — : Decrease value of the setting; °C/°F temperature measurement unit
c. + : Increase value of the setting
d. Metal Probe ConnectorWire
e. Silicone sleeve
f. Metal probe
DISPLAY UNIT-REAR VIEW
BATTERY INSTALLATION
1. Remove the battery door.
2. Replace the battery with AAA x 2.
3. Ensure the battery is in place, matching the polarities (+/-) and replace
the battery door.
4. Press RESET after each battery change.
Download the APP
Connect the APP Store and search‘GrillPro’on the following devices:
iPhone®(4S and later)
iPad®(3rd generation and later)
iPad mini™ (all generations)
Download the APP
https://play.google.com/store/apps/details?id=com.bbq.project
Support Android 4.3 and later
BUTTON OPERATION SET BUTTON
Press SET key to wake up.
Press 3 sec the SET key to enter the sleep mode.
Quickly press SET key to enter alarm temperature setting mode.
Quickly press SET key to exit setup.
+ BUTTON
Quickly press + button, the alarm temperature increases.
Press and hold + button, alarm temperature increases rapidly.
— BUTTON
Quickly press — button, alarm temperature decreases.
Press and hold — button, the alarm temperature decreases rapidly.
Short press key — switching temperature mode.
LED BACKLIGHT
LED display 3 colors are green, blue, red.
Screen will illuminate for 10 seconds after pressing any button.
TEMPERATURE MEASUREMENT RANGE
Device measures temperatures from-25°C to 300oC (-13°F to 572°F)
When the temperature is lower than the minimum temperature,“LLL”will display.
When the temperature is higher than the maximum temperature,“HHH”will display.
“----”will display for 3 sec after it is not plugged in.
APP FUNCTION
Automatic or manual searches for Bluetooth® devices. Open APP to enter the pairing screen
beneath the display [search] or [lift] button. Click [search], the APP will automatically nd the
surrounding Bluetooth® devices, automatically connect and enter the temperature display
interface.When Bluetooth® connection fails the main interface [pairing] ashes un-pairing the
device to connect to other devices.
APP MAIN INTERFACE
Display device temperature
Set temperature (prole mode and temperature mode)
Set countdown time (countdown mode)
Menu setting key
Pairing key
Task start (stop) key
SELECT THE MEASUREMENT UNITS
Tap to view the Prole options of food
Tap on your food type
Tap to select cooking degree and temperature, it can be
adjusted up and down 2 degrees
Tap to go back to the previous screen to save.
Carefully plug the meat probe into the bottom socket
Auto Shut-O:
The thermometer will automatically turn o if there is no probe installed.
1. Magnet
2. Reset button
3. Pay feet
4. Battery compartment
d
e
f
1
2
3
4
5
6
abc
1
2
3
4
AAA battery x2
TIMER SETTINGS
Tap to view the Prole options of timer
Slide up or down to set time you need.
Timer measurement range: 23H 59M 59S
Tap to go back to the previous screen to save.
SELECT SETTINGS
Tap to view the Prole options of alarms.
Tap to choose your favorite alarm tone.
Tap to go back to the previous screen to save.
If food is cooked, alarm will ring and show notication menu.
Temperature will show on device screen and LED backlight
will ash 5 times.
SHARING
Tap to view the menu option of camera.
Tap on camera button.
Tap on share button and food photos can be shared
in your community, if enabled.
WARNING
Meat probe temperature range: -13°F to 572°F (-25°C to 300°C)
The meat probe should always be inserted into the center of the item which is being cooked for an
accurate temperature reading.
The stainless steel probe and wires will get hot, always wear heat-resistant gloves when handling.
Do not use probe in a microwave oven or expose to ames or temperatures exceeding 572°F (300°C).
KEEP THE PROBE AND WIRES AWAY FROM CHILDREN.
NOTE
Clean the probe after each use.
Wash the stainless steel probe with hot soapy water and dry thoroughly.
Do not immerse the probe in water while cleaning.
Do not expose the probe plug to water or other liquids. This will result in bad connections and faulty readings.
Wipe the thermometer base with a damp cloth.
DO NOT IMMERSE IN WATER.
TO AVOID DAMAGE, DO NOT USE CLEANING AGENTS OR ABRASIVE CLEANERS.
SPECIFICATION
TYPE DESCRIPTION
DISPLAY UNIT
L X W 52 X 45 MM
TEMPERATURE MEASURING RANGE 25°C TO 300OC 13°F TO 572°F
TEMPERATURE UNIT °C / °F
POWER 2 X AAA BATTERIES
METAL PROBE
LENGTH 122 MM
HEAT RESISTANCE FOR METAL PROBE AROUND 300°C 572°F
TEMPERATURE RANGE 25°C TO 300°C 13°F TO 572°F
BATTERY LIFE UP TO 1 YEAR
BLUETOOTH RANGE 25 METERS OPEN TERRITORY
www.grillpro.com
MADE IN CHINA FOR:
GRILLPRO®
WATERLOO, ONTARIO CANADA
N2V 1K3 ©2018
TIMER SETTINGS
Tap to view the Prole options of timer
Slide up or down to set time you need.
Timer measurement range: 23H 59M 59S
Tap to go back to the previous screen to save.
SELECT SETTINGS
Tap to view the Prole options of alarms.
Tap to choose your favorite alarm tone.
Tap to go back to the previous screen to save.
If food is cooked, alarm will ring and show notication menu.
Temperature will show on device screen and LED backlight
will ash 5 times.
SHARING
Tap to view the menu option of camera.
Tap on camera button.
Tap on share button and food photos can be shared
in your community, if enabled.
WARNING
Meat probe temperature range: -13°F to 572°F (-25°C to 300°C)
The meat probe should always be inserted into the center of the item which is being cooked for an
accurate temperature reading.
The stainless steel probe and wires will get hot, always wear heat-resistant gloves when handling.
Do not use probe in a microwave oven or expose to ames or temperatures exceeding 572°F (300°C).
KEEP THE PROBE AND WIRES AWAY FROM CHILDREN.
NOTE
Clean the probe after each use.
Wash the stainless steel probe with hot soapy water and dry thoroughly.
Do not immerse the probe in water while cleaning.
Do not expose the probe plug to water or other liquids. This will result in bad connections and faulty readings.
Wipe the thermometer base with a damp cloth.
DO NOT IMMERSE IN WATER.
TO AVOID DAMAGE, DO NOT USE CLEANING AGENTS OR ABRASIVE CLEANERS.
SPECIFICATION
TYPE DESCRIPTION
DISPLAY UNIT
L X W 52 X 45 MM
TEMPERATURE MEASURING RANGE 25°CTO 300OC 13°F TO 572°F
TEMPERATURE UNIT °C / °F
POWER 2 X AAA BATTERIES
METAL PROBE
LENGTH 122 MM
HEAT RESISTANCE FOR METAL PROBE AROUND 300°C 572°F
TEMPERATURE RANGE 25°C TO 300°C 13°F TO 572°F
BATTERY LIFE UP TO 1 YEAR
BLUETOOTH RANGE 25 METERS OPEN TERRITORY
www.grillpro.com
MADE IN CHINA FOR:
GRILLPRO®
WATERLOO, ONTARIO CANADA
N2V 1K3 ©2018
TIMER SETTINGS
Tap to view the Prole options of timer
Slide up or down to set time you need.
Timer measurement range: 23H 59M 59S
Tap to go back to the previous screen to save.
SELECT SETTINGS
Tap to view the Prole options of alarms.
Tap to choose your favorite alarm tone.
Tap to go back to the previous screen to save.
If food is cooked, alarm will ring and show notication menu.
Temperature will show on device screen and LED backlight
will ash 5 times.
SHARING
Tap to view the menu option of camera.
Tap on camera button.
Tap on share button and food photos can be shared
in your community, if enabled.
WARNING
Meat probe temperature range: -13°F to 572°F (-25°C to 300°C)
The meat probe should always be inserted into the center of the item which is being cooked for an
accurate temperature reading.
The stainless steel probe and wires will get hot, always wear heat-resistant gloves when handling.
Do not use probe in a microwave oven or expose to ames or temperatures exceeding 572°F (300°C).
KEEP THE PROBE AND WIRES AWAY FROM CHILDREN.
NOTE
Clean the probe after each use.
Wash the stainless steel probe with hot soapy water and dry thoroughly.
Do not immerse the probe in water while cleaning.
Do not expose the probe plug to water or other liquids.This will result in bad connections and faulty readings.
Wipe the thermometer base with a damp cloth.
DO NOT IMMERSE IN WATER.
TO AVOID DAMAGE, DO NOT USE CLEANING AGENTS OR ABRASIVE CLEANERS.
SPECIFICATION
TYPE DESCRIPTION
DISPLAY UNIT
L X W 52 X 45 MM
TEMPERATURE MEASURING RANGE -25°C TO 300OC (-13°FTO 572°F)
TEMPERATURE UNIT °C / °F
POWER 2 X AAA BATTERIES
METAL PROBE
LENGTH 122 MM
HEAT RESISTANCE FOR METAL PROBE AROUND 300°C (572°F)
TEMPERATURE RANGE -25°CTO 300°C (-13°FTO 572°F)
BATTERY LIFE UP TO 1 YEAR
BLUETOOTH RANGE 25 METERS (OPEN TERRITORY)
www.grillpro.com
MADE IN CHINA FOR:
GRILLPRO®
WATERLOO, ONTARIO CANADA
N2V 1K3 ©2018
Other manuals for 13975
1
Table of contents
Other GrillPro Thermometer manuals
