Grohe 04058XX0 User manual

Installation Instructions / Warranty
S
04058XX0
E
04060XX0

2
Deck-mounted Pot Filler S 04058XX0
Deck-mounted Pot Filler E 04060XX0
04058XX0
04060XX0

3
Installation Considerations
For best results, Hansgrohe recommends that this unit be installed by a licensed, profes-
sional plumber.
Please read over these instructions thoroughly before beginning installation. Make sure
that you have all tools and supplies needed to complete the installation.
A countertop having a thickness of 3/4" or less should be reinforced to distribute the
weight of the pot filler.
Do not use plumbers putty. Seal the underside of the escutcheon with silicone sealant if
desired.
•
•
•
•
Technical Information
Recommended water pressure 14.7 - 72.5 psi
Hole size in mounting surface 1-1/8"-- 1 3/8"
Max. mounting surface depth 2 3/4"
Flow rate 2.2 gpm
Requires 1/2 NPSM connection hose (not included)
This faucet is intended for cold water only.
Allow sufficient space for the
escutcheon. There should be a minimum 1
1/2" between the center line of the mounting
hole and the wall or backsplash.
•

4
Installation
Verify that the o-ring is installed on the underside
of the escutcheon. Push the escutcheon onto the
faucet shank.
Install the washer and nut onto the shank.
Orient the faucet as desired.
Tighten the nut against the mounting surface.
Connect the cold water supply hose (not included).
Turn on the water at the supply and check for
leaks.

5
Caution
The pot filler may get hot when the arm is positioned above the stove's burner. Swing the
pot filler away from the stove after use.
Remove the aerator (1).
Turn the water on and flush the faucet of debris
(2).
Replace the aerator (3). 1.
2.
3.