Grundig GSS HDTV Series User manual

A
A
CLASS
CLASS
KLASSE
KLASSE
GSS
Grundig SAT Systems GmbH
Beuthener Strasse 43
D-90471 Nuremberg
Phone: +49 (0) 911 / 703 8877
Fax: +49 (0) 911 / 703 9210
Email: [e-mail]
Internet: http://www.gss.tv
Grundig SAT SystEms
Assembly Instructions
Assembly Instructions
English
HDTV 583 TPS
HDTV 584 TPS
HDTV 585 TPS
Head-End Digital Modulator HDTV

- 2 -
- 2 -
Contents
1 Safety regulations ...............................................................................................3
2 General information ............................................................................................3
2.1 Packing contents.................................................................................... 3
2.2 Technical data....................................................................................... 4
2.3 Description ........................................................................................... 5
2.3.1 Manual display of the software version.......................................... 6
2.3.2 How the TP module works............................................................ 6
2.3.3 Explanation of the term “symbol rate”............................................ 7
2.3.4 Bandwidth-efficient assignment of cable channels with low
bandwidths (SelecPlex®) ............................................................ 8
3 Assembly ............................................................................................................9
3.1 Installing the Cassette............................................................................. 9
3.2 Connecting the Cassette......................................................................... 9
4 The operator control panel at a glance............................................................... 10
4.1 Menu items ..........................................................................................10
4.2 Operator control panel..........................................................................10
5 Programming .................................................................................................... 11
5.1 Preparation..........................................................................................11
5.2 The menus at a glance ..........................................................................12
5.3 Cassette programming ..........................................................................15
Selecting the Cassette ...........................................................................15
Switching the channel strip.....................................................................15
To query software versions: ...................................................................16
Setting the output channel......................................................................16
Modulator settings ................................................................................18
Setting output level of the channel strips ..................................................18
Producing a QAM signal for testing........................................................19
Inverting the user signal........................................................................ 20
QAM monitoring................................................................................. 20
Deleting a PID ......................................................................................21
Renaming the PID .................................................................................21
Conditional Access Table...................................................................... 22
Setting the LNB oscillator frequency....................................................... 23
Setting the input symbol rate and the DVB mode ..................................... 24
Setting the input frequency.................................................................... 24
Setting the station filter ......................................................................... 26
Setting the QAM modulation value........................................................ 27
Setting the stuffing ............................................................................... 28
Network Information Table (NIT) .......................................................... 29
Saving settings .................................................................................... 30

- 3 -
- 3 -
1 Safety regulations
Important
• Assembly, installation and servicing must be carried out by an authorised
electrician.
• Switch off operating voltage before the start of assembly or service work or
pull out the mains plug.
• Install the system …
- in a dust-free, dry environment
- so that it is protected from moisture, vapours, splashing water and damp
- somewhere protected from direct sunlight
- away from the immediate vicinity of heat sources
- at an ambient temperature of < 50 °C.
• Make sure the device is adequately ventilated.
Do not cover the ventilation slots.
• Beware of short circuits!
• No liability is accepted for damage caused by faulty connection or inexpert
handling.
• Observe the relevant norms, regulations and guidelines on the installation and
operation of antenna systems.
• Earth the SAT receiver using the equipotential bonding rail in accordance with
DIN EN 50083 and VDE 0855.
• Do not perform installation and service work during thunderstorms.
Take action to prevent static discharge when working on the device.
2 General information
2.1 Packing contents
1 Cassette HDTV 583 TPS or HDTV 584 TPS or HDTV 585 TPS
2 HF connection cables
1 Assembly instructions (on CD)

- 4 -
- 4 -
2.2 Technical data
The devices meet the following EU directives:
73/23/EEC, 89/336/EEC
The product fulfils the guidelines and standards for CE labelling.
HF input:
Frequency range: 950 … 2150 MHz
Frequency raster: 1 MHz
Level range: 35 dBµV … 80 dBµV
DVB-S modes: DVB-S
1/2 , 2/3 , 3/4 , 5/6 , 7/8
DVB-S2 modes: QPSK
1/2 , 3/5 , 2/3 , 3/4 , 4/5 , 5/6 , 8/9 , 9/10 ,
8PSK
3/5 , 2/3 , 3/4 , 5/6 , 8/9 , 9/10
Symbol rate DVB-S: QPSK: 2 … 45 MSymb/s
Symbol rate DVB-S2: QPSK: 10 … 30 MSymb/s
8PSK: 10 … 31 MSymb/s
HF output:
HDTV 583 TPS
Frequency range: 112 MHz … 306 MHz
HDTV 584 TPS
Channels: S21 … S41
Frequency range: 306 MHz … 466 MHz
Channel raster: 8 MHz
HDTV 585 TPS
Channels: C21 … C69
Frequency range: 474 MHz … 858 MHz
Channel raster: 8 MHz
Output level: Typ. 90 dBµV
Output impedance: 75 Ω, nominal
Connections:
SAT inputs: 2 F-connectors
HF output: 1 IEC socket
Connection strip (10-pin): For supply voltages and control circuits
Socket RS 232: Update interface

- 5 -
- 5 -
2.3 Description
The Cassettes convert two DVB-S-/DVB-S2-modulated data flows into two QAM-
modulated data flows. The Cassettes are controlled via the head end.
Each Cassette has two inputs and one HF output.
Each Cassette is equipped with two channel strips (A and B). The channel strips
consist of digital SAT tuners, the digital signal preparing units and the output
converter. The Cassettes´ channel strips are indicated by Box
“…A” or Box “…B”
in the control unit display.
The integrated TP module (Transport Stream Processing) processes the data
from the demodulated transport stream. In this way, service information can be
modified (NIT – Network Information Table), data rates can be increased (Stuff-
ing) and individual programs can be deleted from the transport flow, while the
rest of the programs can be transmitted with optimised bandwidth. Furthermore,
the operator ID (required for visAvision, for example) can be set.
The operating software of the Cassette can be actualised via an external 9-pin
SUB-D-socket, using a PC or notebook (software “BE-Flash”). You can find the
current operating software of the Cassettes on the website “www.gss.tv”.
The prepared input signals are transmitted to the HF output collector of the head
end via the HF output socket. The output level of the Cassettes can be set with the
level regulator (max. –20 dB) at the output collector of the head end.
After the head end has been switched on, the software version of the control
unit is displayed briefly in the two-line LC display and afterwards the type of
Cassette of the first slot. Approximately five minutes after the last button has
been pressed, the software version of the control unit is displayed.
The Cassettes are designed for use in the following head ends:
– STC 316
– STC 332
– STC 1200
– STR 19-8

- 6 -
- 6 -
2.3.1 Manual display of the software version
If necessary, you can call up the display of the software version of the control
unit manually:
• Hold down any two keys of the control unit simultaneously until the display
goes dark and
the software version, e.g. “ V 35 ”, is displayed.
2.3.2 How the TP module works
When converting the QPSK-modulated signal to a QAM-modulated cable signal,
the demodulated data stream can be accessed via the integrated TP module. This
data stream, also called transport stream, contains several stations with all their
components (video, audio, data and service information), which can be changed
using the TP module.
The individual functions
Station filter
Individual stations can be deleted. This reduces the data rate and, consequently,
the output symbol rate.
Stuffing
The transport stream is padded out using what is known as zero data. This
increases the data rate and, consequently, the output symbol rate. Changing
the output symbol rate suitably alters the bandwidth used (halving the output
symbol rate roughly halves the bandwidth at the output).
Changing service information
The transport stream contains data in the form of tables which the receivers eval-
uate and require for convenient use. The TP module can change the “Network
Information Table” (NIT). The NIT contains data which the set-top box needs for
the automatic search function.

- 7 -
- 7 -
2.3.3 Explanation of the term “symbol rate”
Modulation schemes such as QPSK and QAM transmit multiple bits simultane-
ously. These are referred to as symbols. In addition to the user data flow which
transmits video and audio information, error correction bits are transferred. The
FEC number states the ratio of error correction bits to user bits. The output sym-
bol rate is calculated as follows:
256-QAM: SR (A) = FEC x 1/4x SR (E)
128- QAM: SR (A) = FEC x 2/7x SR (E)
64-QAM: SR (A) = FEC x 1/3x SR (E)
32-QAM: SR (A) = FEC x 2/5x SR (E)
16-QAM: SR (A) = FEC x 1/2x SR (E)
4-QAM: SR (A) = FEC x 1/1x SR (E)
Example:
Output symbol rate 64-QAM, FEC= 3/4,
Input symbol rate SR (E) = 27,500 kilosymbols per second
SR (A) = 3/4x 1/3x 27,500 kilosymbols/s
SR (A) = 6,875 kilosymbols/s
Note:
If no “FEC” is stated in the station lists, it can be assumed to be
“FEC =
3/4
”.
Reception from a transponder with a very low symbol rate
(SCPC station)
The extremely low data rate means that the output symbol rate is very low. If
there are reception problems with different digital receivers, set QAM modula-
tion with stuffing to a higher value.
Defined symbol rates
Some cable operators specify a fixed symbol rate (e.g. 6,900 kilosymbols per
second).

- 8 -
- 8 -
2.3.4 Bandwidth-efficient assignment of cable channels with low bandwidths
(SelecPlex®)
Channels with low bandwidths are the result of filtering out stations which are
not required. These “narrow” channels can then be arranged in one channel to
save space. To do this, activate fine tuning in the “Output channel” menu (as-
signment outside the official channel raster).
Note:
The required bandwidth is roughly equal to the symbol rate plus 20% in MHz.
ESC 1
Nile TV
Nile News
TVP 1
TVP 2
TVP 3
Viva
Gala
3 MHz
64 QAM
2.5 Ms/s
4 MHz
64 QAM
3.3 Ms/s
S21 S22 S23 S24
TV 5 RTM 1 ESC 1 RAI UNO DW TV RTP SISAL TV TV Bulgaria Mediolanum Nile TV Nile News Super Sport Viva Gala Fantasy Cine 5 TVP 1 TVP 2 TV Polonia TVP 3
Astra 19,2° East Eutelsat 7° EastTürksat 42° EastEutelsat 13° East

- 9 -
- 9 -
3 Assembly
3.1 Installing the Cassette
Warning
Before inserting or changing Cassettes, pull the mains plug of the head end
out of the mains socket.
•
Unscrew the fastening screws from the bracket in the head end.
• Insert the Cassette into a free slot and push it into the housing.
• Align the Cassette and gently make it contact with the connections of the
circuit board and the HF bus bar.
• Fasten the Cassette with the 1screws.
3.2 Connecting the Cassette
•
Connect the HF input cable with the input sockets “ INPUT A ” 2
(channel strip A) and “ INPUT B ” 1(channel strip B).
• Connect the head end to the mains power supply.
—> The Cassette is now ready for operation.
INPUT B

INPUT A

RS 232

+24
BREITBA
C101
L104
L100
L101
L103
C100
LNC-
+18V
ROT
+18V
Anschl.
GRUEN
INPUT OUTPUT OUTPUT INPUT











- 10 -
- 10 -
Note:
The operating software of the Cassette can be updated via the socket
“RS 232” 3(9-Pin-Sub-D) by means of a PC or notebook. Use the
“BE-Flash” software as the update software. You can find the current operat-
ing software of the Cassettes on the website “www.gss.tv”.
4 The operator control panel at a glance
4.1 Menu items
Program the Cassette using the keys on the head end control unit. The two-line
display of the control unit then shows the menus.
You can select the following main menu items with the button:
– Cassette and channel strip
– Output channel
– LNB oscillator frequency
– Symbol rate
– Input frequency
– Station filter
– QAM modulation
– Stuffing
– Network Information Table (NIT)
4.2 Operator control panel
You can individually select the menus and menu items step-by-step using the
key pad of the head end:
scrolls forward through the menu
AUDIO scrolls backward through the menu
▶
◀/
select parameters in the menus
set values, initiate actions
selects sub-menus
Msaves all entries
The parameters to be set are displayed underlined (cursor).
BE–Remote V 35
please wait . . .