Grundig G-VRC-01 User manual

EASY–USE REMOTE CONTROL
G-VRC-01
EN
AUS GUTEM GRUND

9
ENGLISH
SAFETY AND SETUP --------------------------------------------------------------------------------------------------
Safety
Please note the following instructions when set-
ting up the television set:
7
The remote control is designed for use in dry
rooms. If you do use it outdoors, make sure it is
protected from moisture such as rain or splas-
hing water.
Never expose the remote control to moisture.
7
Never open the remote control under any cir-
cumstances. Warranty claims are excluded for
damage resulting from improper handling.
7
Only clean the remote control with the cloth
provided. Do not use water with soap or de-
tergent.
7
To ensure fires do not occur,
always keep candles and other
open flames away from the re-
mote control.
7
Do not expose the battery to excessive heat
such as direct sunlight, fire, etc.
7
Warning for the Product Package
Packaging materials of your product are recy-
clable. Please ensure that packaging materials
of your product are disposed of separately
in accordance with the regulations set by the
local authorities in order to proceed environ-
mental friendly recycling process.
Connecting the charging station
to the television
1 Insert the Micro USB connector of the sup-
plied cable to the socket of the charging sta-
tion.
2 Insert the USB connector of the supplied
cable to the socket »USB 1« or »USB2
(HDD)« on the television.
Charge the battery for the
remote control
Notes:
7 Fully charge the battery before initial use
and after a long period of inactivity (charge
time approx. 3 hours).
7 The television must be switched on during
the charge process.
7 Optimum charge and operation results are
acheived with an ambient temperature of
between 15 °C and 40 °C.
7 The remote control can also be charged us-
ing a PC or via a USB adapter.
7 With a fully charged battery, the operating
duration of the remote control is approx. 12
hours.
1 Switch on the television from stand-by using
the device remote control.
2 Place the remote control in the charging sta-
tion.
– The display is illuminated red.
Note:
7 The display illuminates blue if the battery is
fully charged.

ENGLISH
10
OVERVIEW ----------------------------------------------------------------------------------------------------------------------------------
Adjusts the volume.
Moves the cursor to the left
and right in the menus.
Muting.
Selects channel – in steps.
Moves the cursor up and
down in the menus.
Opens the main menu.
Switches on and off
(Standby).
Microphone.
Opens and close the Smart
inter@ctive menu.
Opens and close the electro-
nic TV guide.
Headphone socket for connec-
ting a stereo headphone set
with a jack plug (ø 3.5 mm).
You can change the volume
of the headphone in the menu
»SETTINGS«, menu item »He-
adphone«.
Note:
7 Prolonged listening with
headphones at loud
volumes can damage
your hearing.
Opens the channel list.
Activates various functions
and save functions/settings in
the menus.
Starts the log on process.
Opens menu for AV channels
and USB input.
Then select using »»
V «, »–«,
»+« or »
Λ « and press »OK«
to confirm.
Zapping function;
switches back one menu level
in the menus.
Activate the Voice Control
function.

11
ENGLISH
INSTALLATION -------------------------------------------------------------------------------------------------------------------
Connect a USB dongle
1 Insert the USB dongle in the socket »USB 1«
or »USB2 (HDD)« of the television.
Register the remote control
1 Press and hold »AV SYNC« on the remote
control.
– The blue display on the dongle flashes.
2 While keeping the »AV SYNC« on the re-
mote control pressed down, press and hold
USB dongle lock button for 3 seconds.
Notes:
7 If the remote control display is red, registra-
tion is not successful, please repeat the pro-
cess.
7 After successful registration the line
»VR Remote Status« is displayed in the
»SETTINGS« menu.
7 The registration can be checked by selecting
the main menu with »MENU«, selecting the
menu option »SETTINGS« with »
V « or » Λ «
and confirming with »OK«. Then select the
line »VR Remote Status« with »
V « or » Λ «.
All LED status and description
LED status Description
Buzzer + RED LED flash
(fast).
(It will continuous until
user push any button of
remote)
Remote control Locator.
BLUE LED flash (fast)
(just once).
Key buttons transmission.
RED LED flash every 1
second for 5 times, stop
for 10 seconds and
repeat.
Battery low.
RED LED on continuous. Battery charging.
BLUE LED on continuous
(until unplug the cable)
Battery charging full.
BLUE LED flash fast
while sync and continu-
ous on until sync com-
plete. Time out 5 sec
and led off
SYNC
Remote control locator
This feature allows you to locate the remote cont-
rol if you have lost it.
1 Press the button on the USB dongle.
– Remote control will emit a sound after a
short while.
2 Press any key on the remote control after you
have found it to stop the buzzer.

ENGLISH
12
VOICE CONTROL ------------------------------------------------------------------------------------------------------------
Main function
The list shows the operating options with the remote control
Notes:
7 Before the „acoustic command“ press and hold the button »$«.
7 Do not cover the microphone on the remote control.
7 The appropriate distance between mouth and RC is 30 cm.
7 Don’t speak too loud.
7 Speak command after the blue LED is ON or » « is shown on TV.
Function Button Acoustic command
Activate Voice Control
function
$/
Switches on the television 8/
Switches off the television 8Television off
Selects channel,
V or Λ Down Up
Selects channel – directly 1 2 ... 8 9 Channel 1 2 3
Opens the channel list OK Channel List
Adjusts the volume
–
or
+
Volume down Volume up
Mute dMute
Zapping function ZZap
Opens menu for AV chan-
nels and USB input. AV SYNC Source
Selects HDMI sources AV SYNC HDMI 1
HDMI 2
HDMI 3
HDMI 4
Select USB source AV SYNC USB
Select AV source AV SYNC Scart
Select Component source AV SYNC Component
Opens and close the elect-
ronic TV guide TV-G Guide
Displays information ?Info

13
ENGLISH
VOICE CONTROL ------------------------------------------------------------------------------------------------------------
Advanced functions
Notes:
7 Before the „acoustic command“ press and hold the button »$«.
7 Do not cover the microphone on the remote control.
7 The appropriate distance between mouth and RC is 30 cm.
7 Don’t speak too loud.
7 Speak command after the blue LED is ON or » « is shown on TV.
Function Button Acoustic command
Opens the main menu MENU Menu
Moves the cursor to the left
and right in the menus
–
or
+
Left Right
Moves the cursor up and
down in the menus
V or Λ Down Up
Activates various functions
and save functions/settings OK Enter
Switches back one menu
level in the menus
Å
Back
Close the menus MENU Exit
Activates various functions
and save functions/settings
in the menus;
Selects pages in teletext
▯ (red)
▯▯ (green)
▯▯▯ (yellow)
▯▯▯▯ (blue)
Red
Green
Yellow
Blue
Opens the Smart
inter@ctive menu. @Applications
Starts the recording on an
external data medium
●Record
Ends playback of a prog-
ramme from an external
data medium;
ends a recording or play-
back in time shift mode;
7Stop
Starts playing a prog-
ramme from an external
data medium
8Play
Freeze frame, if no external
data medium is connected;
Playback pause in Time
shift mode
!Pause

ENGLISH
14
INFORMATION ------------------------------------------------------------------------------------------------------------------
Product Fiche
Operating voltage:
DC 5 V; 500 mA
Service information for dealers
7 The product complies with
the following EU directives:
With this note, Grundig
declares that this
appliance is in conformity with the main and
other relevant terms of the 1999/5/EC and
2011/65/EU directive.
To obtain a copy of the Declaration of
Conformity (Doc), please submit your
request by using the contact information at
www.grundig.com/download/doc
Environmental note
7 This product has been made
from high-quality parts and
materials which can be re-
used and recycled.
Therefore, do not dispose of the product
and the built-in rechargeable battery along
with normal household waste at the end of
its service life. Take it to a collection point
for the recycling of electrical and electronic
equipment, where the battery are taken out
of the device and disposed of separately.
Dispose of the used device at a collection
point for electrical and electronic equipment.
The symbol on the product, in the operating
manual or on the packaging indicates that
recycling is possible.
Information on collection points is available
from your local authorities.
Help protect the environment by recycling
used products.
7 This symbol on rechargeable
batteries/batteries or on the
packaging indicates that the
rechargeable battery/
battery may not be disposed of with regular
household rubbish. For certain rechargeable
batteries/batteries, this symbol may be
supplemented by a chemical symbol.
Symbols for mercury (Hg) or lead (Pb) are
provided if the rechargeable batteries/
batteries contain more than 0.0005%
mercury or more than 0.004% lead.
Rechargeable batteries/batteries, including
those which do not contain heavy metal,
may not be disposed of with household
waste. Always dispose of used batteries
in accordance with local environmental
regulations. Make enquiries about the
applicable disposal regulations where you
live.