GSM CWT5020 User manual

2
Thank you
Thank you for purchasing our products. Please read through this manual before using this product so as
to operate the product properly.
The GSM alarm system adopts the newest GSM network and Digital Signal Processing technology, and
is wi
dely used in security field. With SMS data transmission and voice platform of GSM network, it really
realizes wireless alarm control and remote managements and solves the limitation of wired data
transmission in telephone and wired network.
Perfect struc
ture, convenient installation, easy operation with wireless control keyboard are designed for
the idea of people
-
oriented, which will make you feel easy and comfortable while use this
system.
“
People is center, technology is first” is our company’s action
rule. Customer Satisfaction is our
consistent pursuit. Perfect system, excellent services, sincere attitudes will bring you a new enjoyment.

3
Contents
I.
SAFETY DIRECTIONS
......................
5
II.
INSTRUCTION
................................
........
6
2.1
Functions & Features of the GSM Alarm
System
6
2.2
Standard Pa
ckage list of the GSM Alarm
System
7
2.3
Specifications of Mainframe of the GSM
Alarm System
................................
................................
....
7
III.
INSTALLATION
................................
........
8
3.1
Alarm Host’s section figure
............................
8
3.2
Insert a valid SIM into the alarm host
.........
10
3.3
Run
................................
................................
....
10
IV.
SETUP STEPS
................................
......
10
4.1
Quick Guide
................................
.....................
10
4.2
Advance
Setup
................................
...............
12
4.2.1
Set 24 Hours Zone
................................
.........
12
4.2.2
Zone settings
................................
...................
12
4.2.3
Alarm voice call
................................
...............
12
4.2.4
Power fail alarm
................................
..............
12
4.2.5
Alarm delay time
................................
.............
12
4.2.6
Arm delay time
................................
................
12
4.2.7
Wired in types
................................
.................
13
4.2.8
Timer mode
................................
.....................
13
4.2.9
Restore factory
................................
...............
13
4.2.10
Erase RF sensor
................................
......
13
4.2.11
RF decoder
................................
................
13
4.2.12
GSM band setup
................................
......
13
V.
VIEW STATUS OF
HOST
....................
14
5.1
View status of Wired inputs
.........................
14
5.2
View the alarm records
................................
14
5.3
View the alarm records
................................
14
5.4
View Timers
................................
....................
14
5.5
View Wired in sms
................................
.........
14
5.6
View RF zone sms
................................
........
14
VI.
OPERATIONS OF THE
HOST
........
15
6.1
Control Output
................................
................
15
6.2
Arm/Disarm
................................
.....................
15
6.3
Sound alarm
................................
...................
15
6.4
Learn RF sensor
................................
............
15
6.5
Call and Hang up call
................................
...
15
VII.
OPE
RATIONS OF REMOTE
CONTROLLER
................................
............
16

4
7.1
Arm
................................
................................
....
16
7.2
Disarm
................................
..............................
16
7.3
Sou
nd alarm enable/disable
........................
16
7.4
Emergency alarm
................................
...........
16
VIII.
LCD ICON DISCRIPTION
.............
17
IX.
QUICK OPERATION COMM
AND
BY KEYBOARD
................................
...........
18
X.
SMS OPERATION COMMAN
D
.........
18
XI.
ENCODE THE WIRELESS
DETECTORS AND REM
OTE
CONTROLLER
................................
............
20

5
I.
Safety Directions
Safe Startup
Do not use
the system
when using
GSM equipment is prohibited or might
bring disturbance or danger.
Interference
All wireless equipment might interfere
network signals of
host
and influence its
performance.
Avoid Use at Gas Station
Do not use
the system
at a gas station.
Power off
Host
it near fuels or
chemicals.
Power it off near Blasting
Places
Please follow relevant restrictive
regulations. Avoid using the device i
n
blasting places.
Reasonable Use
Please install the product at suitable places
as described in the product documentation.
Avoid signal screening by covering the
mainframe.
Use Qualified Maintenance
Service
Maintenance can be carried out only by
qualifie
d maintainer.
Waterproofness
The product is not waterproof. Please
install it at dry places and keep it dry.

6
II.
Instruction
The GSM Alarm System is a new security protection solution special for home, house and office and other
applications. It based on Wir
eless GSM Communication network, intergrated
LCD
Menu display and Computer
technology and voice communication. When any sensor activated, it will Call&Send SMS to owners telephone
immediately.
The GSM Alarm System
equips with LCD and entire operation Menu
s Displayed, all operations and settings are visual
and intuitive! Also, the user can set it by PC through USB cables.
2.1
Functions & Features of the GSM
Alarm System
1.
GSM Frequency: Dual
-
Band
(900/1800MHz), Quad
-
Band is optional
(850/900/1800/1900Mhz)
;
2.
Can a
rmed, Bypass armed or disarmed by SMS or remote control or mainframe keyboard;
3.
Automaticed send SMS Alert and dial to the pre
-
set cellphone when any sensor activated;
4.
Equips with 4 Wired Zones,
NC/NO, and Zone Name is editable;
5.
Equips with 8 Wireless Zones
, Normal/Bypass mode and Zone Name is editable, 3 24
-
Hour zones for Panic
button, smoke and gas leakage sensor;
6.
Supports 10 alarm telephones and 20 Alarm Records for owner review;
7.
Supports 6 timing points, 4 pre
-
set timing points for customer choice;
8.
Suppo
rts armed delay to give enough time to you go out the home, the delay time is editable by user;
9.
Equips with 1 relay output, it like a switch, use for driving DVR, light, gate or other electric appliances once the
system activated. It can be disable and ena
ble by user;
10.
The Keypad can use as a dialer, the functions like the Cellphone;
11.
The external power failure&recov
ery alert function is optional
;
12.
Supports wiretap through external mirophone to special user for high
-
sensitivity listen by RJ
11
connector is
ava
ilable;

7
13.
Supports internal Speaker to special user for two
-
way voice communication by RJ
11
connector;
14.
It is Compatible with PT2262/2264 wireless IC, EV1527 is optional;
15.
Standby internal rechargeable battery which can last 10 hours;
16.
Based on the GSM communi
cation network and Operation Menu Display technology, apply to wide range
situations;
2.2
Standard Package list of the GSM Alarm System
Mainframe X1
Remote contol X2
Wireless PIR Motion Sensor X1
Wireless Door magnetic Sensor X1
Wired Siren X1
AC/DC
Adaptor
X1
PC Programmer Tool CD X1
User Manual X1
2.3
Specifications of Mainframe of the GSM Alarm System

Rated Voltage: 12VDC 1.5A

Working temperature:
-
10
℃
～
+60
℃

Storage temperature:
-
20
℃
～
+60
℃

Relative humidity:
10
-
90%, No condensation

Work frequency
:
GSM900,1800Mhz or 850/900/1800/1900MHz

Communication protocol:
GSM PHASE 2/2+ (include data service)

Wireless sensor receiving frequency: 433+/
-
0.5MHz

Wired Zones: 4

Wireless Zones: 8

24
-
Hour Wireless Zones: 3(Special for Panic Button, Smoke and Gas Sen
sor)

Related Voltage of the Relay: 5V

Effective distance of wireless transmission: 100 m (Open area)

Battery: Built
-
in lithium
-
ion battery: 800mAh 3.7V

Standby time Approx. 10hours (depending on the network condition)

Net Weight: 1.60Kg

8
III.
The host
Inst
all
ation
3.1
Alarm Host’s section figure
Speaker
menu button
LCD display
Keyboard
Power switch
SIMcard socket
USB

9
Interface1
(RJ11 connector,Telephone cable or
CAT5 cable)
Interface2
(RJ11 connector,Telephone cable or
CAT5 cable)
PIN1
M
icrophone positive electrode
PIN1
GND
PIN2
M
icrophone negati
ve electrode
PIN2
GND
PIN3
PIN3
Wired sensor input 3
PIN4
Output relay positive electrode
(Relate voltage:3A/250VAC)
PIN4
Wired sensor input 2
PIN5
PIN5
Wired sensor input 1
PIN6
Output relay negative electrode
(Relate voltage:3A/250VAC)
PIN6
Wi
red sensor input 0
Tips
:
The Microphone is the same as computer
microphone, you can use the computer microphone
to it;
Tips
:
Wired sensor input can connect Temperature
sensor, Water leakage sensor, etc.

10
3.2
Insert a valid SIM into the alarm host
Before in
stalling the host, remove the SIM slot cover with screwdriver and insert SIM card.
3.3
R
un
Make sure that the power supply is connected correctly, and turn on the host power switch. The
alarm
host will search
the GSM network automatically within 25 seconds aft
er it is started. Then the LCD display turns on and shows the
status of arm, disarm, GSM signal etc.
IV.
Setup
steps
4.1
Q
uick Gui
de
Login system
1
Press “
OK
”
button
, input password
,
The initial password is
000000
(must be numbers).
Set the mobile phone n
umber
2
After enter Main menu, please select
”
Setup
”
,
and select
“
Store phones
”
,
press
”
OK
”
to add phones by
keyboard, while
delete phones, you can press
“
UP
”
button to delete phone numbers
.
Y
ou can add 10
mobile phone numbers.
Main menu
0 view
1 Operation
>
2 Setup
Setup
0 24 hours zone
1 Zone settings
>
2 Store phones
Store phones
0
：
-
>
1
：
-
>
2
：
-
>