GSM FWT-G8544 User manual
User’s Manual V1.0
G 8544
Thank you of choosing this product. Please read this Manual carefully
before using.
When you open the packing box, the articles can be founded as
follows:
1. GSM Fixed Wireless terminal : 1 PCS
2. Telephone line with Double RJ heads
3. AC adapter (220VAC-9DC)
4. User’s Manual
1. Operation Condition
zOperating temperature: 0℃~ +40℃
zOperating humidity: 5%~95%
2. Technical Parameter
zOperating frequency: GSM900/DCS1800MHz
or GSM850/DCS1900MHz
zOperating voltage: AC220V±20% ,50hz±1%
zFeedback Power :25mA
zRing signal: 75V±15,25Hz
zAntenna system: all directions,50
zBackup Battery: 6V/1500ma
3. Outward appearance:
1
Fax
Fax
A BCDEF
A: Signal strength. Indicates the strength of FWT’s connection with
the network. The more bars visible, the stronger the signal.
B: telephone is hook on
C: telephone is hook off
D: Connect Internet
E: error States
F: Battery level indicator. Shows the amount of charge left in your
2
battery.
error States:
1: No SIM card
2: Need PIN
3: Terminal locking fail
4: network register fail
5: Operator locking fail
6: Need PUK
7: Cell Site locking fail
Back elevation:
O
F
F
O
N
P
W
R
P
H
O
N
E
P
H
O
N
ES
E
R
I
A
L
PWR: Power jack
Phone: Phone interface
Serial: Connect to PC
ANT: External antenna
4. Installation
3
1. Open the cover shell;
2. Insert SIM card;
3. Connect the double RJ heads with the RJ11 port of the
terminal and the RJ11 port of the regular fixed telephone;
4. Connect AC/DC adapter to PWR jack.
5. Dialing
Pick up the handset of the regular fixed telephone first, then
begin dialing when the dialing tone is able to be heard. Once
a number was dialed, key “#” can help to expedite call out.
6. Answering
When the regular fixed telephone is ring, please pick up the
handset of the regular fixed telephone and talk to the other
side.
7. Call Waiting (it need be supported by network)
4
If another call (named C) comes in when you (named A) are
on the phone with the other party (named B), A will hear
waiting tone on the phone. A has two choices. Ask B to wait,
and then switch to the conversation with C; or keep talking
with B and let C wait.
How to use this function?
1) Setup: Press “*43#” after hearing dial tone. You can hear
the verification tone, otherwise please do above step
again until hearing the verification tone.
Note:The call Waiting need network support.
2) Operation: When C calling into a conversation between A
and B, A and B both can hear the call waiting tone, and C
will hear ring back tone.A has three choices:
<1> Keep talking with B, pressing “R” ( or pat cradle if
cannot find “R”). Press “0” when hearing dial tone. C will
hear busy tone.
<2> Hold on B, switch to talk with C. To do this, A should
press “R”, after hearing dial tone, press “2”.
<3> Finish conversat ion with B, switch to talk with C. To
5
do this, A should Press “R”, after hearing dial tone, press “1”.
3) Cancel: After hearing dial tone, press “#43#”. You can
hear the verification tone, otherwise please do it again until
hearing the verification tone.
8. Three party service (it need be supported by network)
When A is on the phone with B, A can add C to current
conversation without hanging up B, or speak to each party
separately.
Register: When user applying for this service, Central Office
will register it directly. The user doesn’t need to register
again before using.
How to use this function:
1) To call C during a conversation with B, A should press “R”
(or pat the cradle). B will be placed hold on. When hearing
dial tone, A can dial the number of C. To return to the
conversation with B if C doesn’t answer the phone, simply
6
press “R” again.
2) To return to the conversation with B and keep C on hold
after the call, A should press “R”. After hearing dial tone,
press “2”. To return to the conversation with B and hang up C,
A should press “R”. After hearing dial tone, press “1”.
3) To add B to the conversation between A and C, A should
press “R”. Press “3” after hearing dial tone.
9. Enter GPRS Or Fax Mode (it need be supported by network)
Pick up the handset of the regular fixed telephone and dial
“**41#”, then the Confirm Sound can be heard for 10
seconds. At the right time, the terminal has entered the GPRS
or Fax Mode and now Users can look through Internet and
fax through the computer with serial cable line.
7
Table of contents
