GTS HCH-XL1-CHG User manual

LCD Indication
Charger Mode
LCD Format and definition
Rapid Charging/
Trickle Charging
Charging Complete
Temperature fault
System Fault
System Fault –
Data Error
Product Specifications
Specification
HCH-XL1-CHG
HCH-XL2-CHG
HCH-XL6-CHG
Operating Temperature
0°C to +45°C
(+32°F to +113°F)
0°C to +45°C
(+32°F to +113°F)
0°C to +45°C
(+32°F to +113°F)
Storage Temperature
-20°C to +70°C
(-4°F to +158°F)
-20°C to +70°C
(-4°F to +158°F)
-20°C to +70°C
(-4°F to +158°F)
Charge Current
Up to 1.6A
Up to 1.6A
Up to 1.6A
Length
159.7mm
159.7mm
159.7mm
Width
114.6mm
202.3mm
573.1mm
Height
90.2mm
90.2mm
90.2mm
Weight
(Power Supply excluded)
800g
1600g
4800g
Power Supply Input
AC 110-240V, 50/60 Hz
AC 110-240V, 50/60 Hz
AC 110-240V, 50/60 Hz
Power Supply Output
DC 13.5V, 3.7A
DC 13.5V, 3.7A
DC 13.5V, 11.2A
User Manual
Equipment Supplied
▪One (1) HCH-XL1-CHG (Single Bay Charger) or
One (1) HCH-XL2-CHG (Two Bay Charger) or
One (1) HCH-XL6-CHG (Six Bay Charger)
▪One (1) Power Supply with an AC line cord
▪One (1) User Manual
Operation
▪Plug the power supply into the charger and plug the AC line cord into the power supply and outlet.
▪Insert a battery or a radio into any charge bay and use the guide rails to ensure the proper
insertion and connection with the charger.
▪The unit should start charging automatically.
▪See LED and LCD Indication for the charging status in the next section.
LED Indication
INDICATION
DESCRIPTION
LED
LED steady Orange
Rapid Charging
LED flashing Green
Trickle Charging
LED steady Green
Charging complete
LED flashing Red
Temperature fault
LED steady Red
System Fault
LED off
No unit in charger
Cradle and Battery Charger
For Harris®XL200-P/XL-185P Series Radio Batteries
HCH-XL1-CHG
Single Bay Charger
HCH-XL6-CHG
Six Bay Charger
HCH-XL2-CHG
Two Bay Charger

Safety Guidelines and Warnings
◼Before using any model of dock, read all instructions and cautionary warnings
◼Do not expose the charger to moisture, temperature extremes, or direct sunlight.
◼Place the charger in a well-ventilated area that is free of foreign particles, and do not block the
ventilation ports.
◼To reduce risk of electric shock, unplug the charger from the power source before cleaning.
◼Dispose of used batteries in accordance with state or local hazardous materials laws.
◼Do not disassemble, incinerate, modify, or short-circuit the dock, battery, or related components.
◼Do not attempt to replace the power supply unit with any other power supply, even if it is similar.
◼If there is a need for cleaning, use cotton swab and alcohol.
Troubleshooting
If the dock does not work after following the operating instructions, troubleshoot as follows:
◼Check the system power at the DC outlet
◼Check for loose cable connections
Warranty & Support
Global Technology Systems, Inc. products are designed to be compliant with the rules and regulations
in the localities in which the products are sold and will be labeled as required. The limits are designed
to provide reasonable protection against harmful interference when electronic devices are operated in
a commercial environment.
This charger is guaranteed to be free from defects in materials and workmanship for 12 months from
date of shipment under normal use.
For detailed warranty and service information, please call us at 1-800-267-2711 or visit:
http://www.gtspower.com/about-us/resources/warranty
For additional information or replacement parts, please contact:
Global Technology Systems, Inc.
550 Cochituate Road Framingham, MA 01701 USA
1-800-267-2711
www.GTSpower.com