Guangzhou Video-Star Intelligent CHTF-05/01.2.22 User manual

5” TP Installation Manual
(Flush Mounted Version)
Parts of the Flush Mounted TP
Screw A Installation Box Connecting Pole Screw B (special)
1、Installation Box Connection
Connect the Connection Pole onto the Installation Box with Screw A, as below:
NOTE: a. Normally Connection Pole with two opposite angles will be enough
b. Holes of Installation Box: Altogether 6 holes, four at corners are for Connection Pole
fixation, the rest two in the middle for fixation of Installation Box on the wall

2、TP Installation
Fix Screw B (special) onto back of TP, see picture below:
NOTE: a. Normally two will be enough, correspondent with that of the Installation Box
b. When Screw B is fixed, there’s will still be some screw thread showing at the end of B,
that’s NORMAL, NO SCREWING ON WITH FORCE.
3、Installation to the Wall
Aim Screw B (special) at Connection Pole, PUSH INSIDE the TP and the installation is done.
Note: Before you push the TP into the Installation Box, the latter should have been fixed in the
wall already.

4、Disassembling
There’s a disassembling slot down in the back of TP for the convenience of disassembling.
Dismounting Slot
Thank you very much and if you still have any problem for installation or understanding please
kindly write to: [e-mail].