GUARDO DR100 User manual

-1-
USER’S MANUAL
GB NL D
FR
DR100 4-Propeller Drone with WIFI & HD CAM

-2-
C B A D
12
7
8
9
10
11
6
5
4
3
2
1
ILLUSTRATION 1
ILLUSTRATION 2 ILLUSTRATION 3
ILLUSTRATION 4

-3-
Hereby,
Par la présente,
Company:
Entreprise:
Address:
Adresse:
declare that the following equipment:
déclare que le disposif suivant :
Product name:
Nom du produit:
Product type:
Type de produit:
conforms with the following safety requirements of the direcves 2011/65/EC, 2009/48/EC,
99/5/EC, 2004/108/EC. Conformity is guaranteed by the CE-symbol.
est conforme aux exigences de sécurité suivantes des direcves 2011/65/EC, 2009/48/EC,
99/5/EC, 2004/108/EC. La conformité est garan par le symbole CE.
This product has been tested against following standards and specicaons, applying versions
valid on 15 April 2016.
Ce produit a été testé par rapport aux normes et spécicaons suivantes, appliquant les
versions valides le 15 April 2016.
EN 60825-1:1994 + A1:2002 + A2:2001
EN 62115: 2005 + A11: 2012 / AC: 2013
EN71-1:2011+A3:2014
EN71 Part 2 : 2011+A1:2014
EN71-3:2013+A1:2014
ETSI EN 300 440-2 V1.4.1
ETSI EN 301 489-1 V1.9.2
ETSI EN 301 489-3 V1.6.1
EN 62479: 2010
EN 55014-1: 2006 + A1: 2009 + A2: 2011
EN 55014-2: 1997 + A1: 2001 + A2: 2008
CHOKING HAZARD - Small parts. Not suitable for children under 3 years.
RISQUES D’ETOUFFEMENT - Pièces de petes dimensions. Ne convient pas aux enfants de
moins de 3 ans.
Joseph van Oosterum, CEO TE-Group NV
DECLARATION OF CONFORMITY
TE-Group NV
Kapelsestraat 61, 2950 Kapellen, Belgium
Guardo Drone DR100
Drone
------------------------------ Manual/Guardo Drone DR100/04-16/V1 --------------------------------
Copyright © GUARDO

-4-
GB
INTRODUCTION
Congratulaons on purchasing your Guardo Drone DR100. Please read these instrucons and
safety warnings before using the device.
WHAT’S IN THE BOX
• Guardo Drone DR100
• Accu-pack
• Remote Control
• 4 extra propellers
• USB charging cable
• Screwdriver
SAFETY WARNINGS
• This product is not a toy and cannot be operated by children under 8 years. Incorrect use can
cause damage for which you will be held responsible.
• This product is intended for outside use.
• This device serves only for private purposes.
• Always respect the privacy of other people.
• Never use the drone in closed public spaces.
• 
• Only use the device in surroundings with no wind.
• Respect the maximum allowed height.
• Never y over people or animals.
• Keep a safe perimeter of 50m compared to persons and property.
• Don’t y the drone in risk zones such as industrial complexes, nuclear installaons, prisons
etc.
• Flying a drone requires some experience. We recommend you to pracce suciently in a
safe environment.
• Check the drone before each use to determine defects. Abnormalies of the mechanisms
can ensure poor agility of the drone.
• When defects occur on certain parts, these parts need to be replaced.
• Do not try to repair your drone yourself. If you aempt to repair it yourself, your guarantee
will not be viable anymore.
• Keep the device safe from obstacle collisions, contact with heat sources or water. If the
device comes in contact with one of these things, the drone can become damaged and re
our electric shocks might occur.
• Make sure you are aware of all legislaons on controlling drones before using the device. You
will be held responsible for any violaon commied by you.
• TE Group is not responsible for any direct or indirect damage caused by incorrect use. This
includes, but is not limited to, damage to buildings, property, vehicles, infrastructure, animals
and persons.

-5-
READY TO START!
A. DEVICES & PARTS
See illustraon 1
A. Camera
B. Propeller
C. Motor
D. Landing gear
See illustraon 2
1. ON/OFF buon
2. Fine-tuning le / right
3. Fine-tuning front / back
4. Joysck controller (front, back, le, right)
5. Flip-buon – Auto Return
6. 2.4G Antenna
7. LED-light ON/OFF – Headless mode
8. Speed-switch (beginner – intermediate – advanced)
9. Joysck controller (higher, down, rotaon le and right)
10. Fine-tuning higher / lower
11. Fine-tuning rotaon le / right
12. LED indicator
See illustraon 3 + 4
We strongly recommend to charge the baery completely before using it for the rst me.
To charge the baery, connect the power connector with the included USB-charging cable. Then
connect the USB-charging cable with your computer or any USB-charging device. The LED-light on
the charger will light up red when the baery is fully charged.
To mount the baery into the drone, push the lid with the camera to the back. When the lid is
open, slide the baery into the foreseen compartment and connect the power connector with the
foreseen connecon on the drone. Close the lid and slide it back to the front.
When the baery is almost empty, the LED-lights on the drone will start ashing.
The remote control works with 4x 1.5V AA-baeries (not included). To install the baeries, use
the included screwdriver to remove the screw of the lid on the backside. Remove the lid and
install the 4x 1.5V AA baeries according to the scheme. Replace the lid and ghten it with the
screw again.
TIP: always remove the baeries aer using the drone or the remote controller to extend the
lifespan of the baeries.

-6-
C. CONNECTING THE DRONE WITH THE REMOTE CONTROL
To connect the drone with the remote control, rst turn the drone on and put it in a safe spot.
Take the remote control and make sure that the le Joysck controller (9) is poinng all the way
down. Turn the remote control on by using the ON/OFF buon (1). Wait unl the LED indicator
(12) stops blinking.

TIP: Pracce makes perfect!
We strongly recommend you to check the device for damage before each ight and that the
surrounding is safe enough so you cannot cause any unwanted damages.
Make sure that the baeries are installed and that the drone is connected to the remote control
(see 3b, 3c). Put the drone in a safe spot. Before you turn on the remote control, always make
sure that the le Joysck controller (9) is poinng all the way down.
Turn on the remote control (1), the propellers will start rotang. Slide the le Joysck controller
(9) slowly in the upwards direcon to make the drone take o.
With the le Joysck controller you can make the drone:
 
Down (altude) Altude will decrease
Up (altude) Altude will increase
Le (rotaon) Drone will rotate to the le and change direcon
Right (rotaon) Drone will rotate to the right and change direcon
To move the device to the front, back, le or right you can use the right Joysck controller (4).
With this Joysck controller you can make the drone:
 
Down (direcon) Drone will move to the back
Up (direcon) Drone will move to the front
Le (direcon) Drone will move to the le
Right (direcon) Drone will move to the right

It can happen that the drone becomes o-balance because of air movements while ying.
Therefore, you can give small commands to restore this balance. This is done by using the ne-
tuning buons (2, 3, 10, 11).

-7-

n°
 
2le When the device has deviated too much to the right, press the
buon to the le to adjust the deviaon
right When the device has deviated too much to the le, press the
buon to the le to adjust the deviaon
3up When the device has deviated too much to the back, press the
buon upwards to adjust the deviaon
down When the device has deviated too much to the front posion,
press the buon downwards to adjust the deviaon
10 up When the device has deviated too much downwards in altude,
press the buon upwards to adjust the deviaon
down When the device has deviated too much upwards in altude,
press the buon downwards to adjust the deviaon
11 le When the device has deviated too much to the right in rotaon,
press the buon to the le to adjust the deviaon
right When the device has deviated too much to the le in rotaon,
press the buon to the le to adjust the deviaon
You can adjust the speed of the drone in 3 levels (beginner – intermediate – advanced). The speed
can be controlled with the speed-switch (8).
This device can also make loopings. By pressing the Flip-buon (5) and indicang a direcon with
the right joysck controller, the drone will make a looping in the direcon you have indicated.
To turn the LED lights on or o, press the LED ON/OFF buon (7).
When turning the drone on it is standard in the normal mode. This means that its head (indicated
with FRONT) will always be the front direcon of the drone. Any direcon you command the
drone to y in, it will always keep the head as its front.
The device also has a Headless-mode. This means that the front of the device depends on the
direcon you’re ying in. This means that also the sides or the backside can be seen as the front.
To acvate this mode, press the LED ON/OFF (7) buon for a few seconds. To exit this mode, press
the LED ON/OFF buon (7) again for a few seconds.
            

The device has an Auto Return funcon. When you acvate this funcon, the drone will y the
own trajectory again in the opposite direcon to reach the original point of departure. You can
acvate the Auto Return funcon by pressing the Flip buon a few seconds.
Please note that the Auto return funcon does not calculate deviaons by wind or other sources.
The original point of departure may vary because of these phenomena.

-8-
USAGE WITH SMARTPHONE
On top of the 2.4G antenna (6) there is a phone holder that ts most smartphones. With the
Guardo Drone App (downloadable in the Apple App Store or Google Play Store) you can:
• See a live preview of your ight
• Make pictures and videos
• Operate the drone
Make sure the drone and remote control are on and place your smartphone in the holder. Open
the Wi-Fi sengs on your smartphone and let it scan to connect with the drone.
ATTENTION: Close by Wi-Fi signals or too much distance between drone and smartphone can
disturb the image.
Pictures and video’s will automacally be saved in the memory of your smartphone unless you
insert an SD-card (max 16 GB, max class 10) in the camera. The media les will then be saved
onto the SD-card.
SUPPORT
For more informaon, technical quesons and return requests, please contact: [email protected]
GUARANTEE
Copyright © Guardo. Guardo is a registered trademark of TE-Group NV. The Guardo brand stands
for superior product quality and outstanding customer service. That is why Guardo warrants this
product against all defects in material and workmanship for a period of two (2) years from the date
of original purchase of the product. The condions of this guarantee and the extent of responsibility
of Guardo under this guarantee can be downloaded from our website: www.guardo.be.

-9-
INTRODUCTIE
Gefeliciteerd met de aankoop van uw Guardo Drone DR100. Gelieve deze instruces en de
veiligheidsvoorschrien aandachg door te nemen alvorens het toestel in gebruik te nemen.
VERPAKKINGSINHOUD
• Guardo Drone DR100
• Accupack
• Remote Control
• 4 extra propellers
• USB Laadkabel
• Schroevendraaier
VEILIGHEIDSVOORSCHRIFTEN
• Dit product is  speelgoed en is mag niet door kinderen jonger dan 8 jaar bediend worden.
Incorrect gebruik kan schade veroorzaken waar u verantwoordelijk voor wordt gesteld.
• Dit product is bedoeld voor buitengebruik.
• Dit toestel dient enkel voor privédoeleinden gebruikt te worden.
• Respecteer aljd de privacy van uw medemens.
• Gebruik de drone nooit in afgesloten publieke ruimtes.
• 
• Houd jdens de vlucht de drone steeds in uw gezichtsveld.
• Gebruik het toestel enkel in een windslle omgeving.
• Respecteer de maximum toegelaten hoogte.
• Overvlieg nooit personen of dieren.
• Bewaar een veilige perimeter van 50m ten opzichte van personen en goederen.
• Laat de drone niet vliegen in risicozones zoals industriële complexen, nucleaire installaes,
gevangenissen etc.
• Het besturen van een drone vergt enige ervaring. Wij raden u aan om voldoende te oefenen
in een veilige omgeving.
•
Kijk de drone voor elk gebruik na om gebreken vast te stellen. Afwijkingen aan de mechanismes
kunnen ervoor zorgen dat de drone slecht bestuurbaar is.
• Als er gebreken aan onderdelen zijn, dient u deze te vervangen.
• Onderneem zelf geen poging om het toestel te repareren. Indien u zelf een poging
onderneemt vervalt de garane.
• Vrijwaar het toestel van botsingen met obstakels, contact met hiebronnen of water. Indien
het toestel in contact komt met één van deze dingen, kan het toestel dermate beschadigd
geraken dat er vuur of elektrische shocks kunnen ontstaan.
• Breng uzelf op de hoogte van de wetgeving rond het besturen van drones alvorens het toestel
in gebruik te nemen. U wordt verantwoordelijk gehouden voor elke inbreuk die u pleegt.
NL

-10-
• TE Group is niet verantwoordelijk voor eventuele directe of indirecte schade door incorrect
gebruik. Dit omvat, maar is niet beperkt tot, schade aan gebouwen, goederen, voertuigen,
infrastructuur, dieren en personen.
KLAAR OM TE STARTEN!
A. TOESTELLEN & ONDERDELEN
Zie aeelding 1
A. Camera
B. Propeller
C. Motor
D. Landingsgestel
Zie aeelding 2
1. AAN/UIT knop
2. Fine-tuning links / rechts
3. Fine-tuning voor / achter
4. Besturings-joysck (voor, achter, links, rechts)
5. Flip-knop – Auto Return
6. 2.4G Antenne
7. LED-licht AAN/UIT – Headless mode
8. Snelheids-schakelaar (beginner – gemiddeld – geavanceerd)
9. Besturings-joysck (hoger, lager, rotae links en rechts)
10. Fine-tuning hoger / lager
11. Fine-tuning rotae links / rechts
12. LED indicator
Zie aeelding 3 + 4
Wij raden u ten zeerste aan om voor het eerste gebruik de baerij volledig op te laden.
Om de baerij op te laden verbind je de stroomconnector met de bijgeleverde USB-laadkabel.
Verbind vervolgens de USB-laadkabel met je computer of een USB-oplaadapparaat. Wanneer de
baerij volledig opgeladen is, zal het rode LED-lampje op de oplaadkabel oplichten.
Om de baerij in de drone te installeren, duw je het klepje met de camera naar achter.
Wanneer het klepje open is, schuif je de baerij in het voorziene comparment en verbind je de
stroomconnector met de voorziene aansluing op de drone. Sluit het klepje en schuif het weer
naar voor. Als de baerij bijna leeg is gaan de LED-lichtjes op de drone knipperen.
De afstandsbediening werkt met 4x 1.5V AA-baerijen (niet inclusief). Om de baerijen te
installeren, draai je met behulp van de bijgeleverde schroevendraaier, de schroef van het klepje
achteraan los. Verwijder het klepje en installeer de 4x 1.5V AA baerijen volgens het schema.
Plaats het klepje terug en draai de schroef vast.
TIP: verwijder steeds de baerij(en) na gebruik van de drone of afstandsbediening om de
levensduur van de baerij(en) te verlengen.