Gucci I-GUCCI User manual

INSTRUCTIONS FOR USE
I-GUCCI SPORT WATCHES

3
Table of contents
General information 4
Watch 7
Setting the time and other settings 8
Alarm (ALM) 12
Chronograph (CH1) 13
Double chronograph (CH2) 14
Countdown (CTD) 15
Tachymeter (KMH) 16
Pedometer (STP) 17
Regatta (SAI) 18
Summary of important functions 19

4
Analog display (LCA) Digital display (LCD)
General information
The watch has the following functions: a watch function with date and 2nd
time zone, an alarm, a chronograph, a double chronograph, a countdown,
a tachymeter, a pedometer and a regatta start.
Press push-button Cto display the functions in turn:
WATCH ALARM (ALM) CHRONOGRAPH (CH1)
DOUBLE CHRONOGRAPH (CH2) COUNTDOWN (CDT)
TACHYMETER (KMH) PEDOMETER (STP) REGATTA (SAI)
WATCH…
Display mode
The I-GUCCI SPORT watch has 2 time display modes:
D
C
A
B

5
Using the push-buttons
Push-button A
- change display mode
- start / stop
- access settings
- increase a value
Push-button B
- backlighting
- select setting
- validate setting
- reset
Push-button C
- select functions
- decrease a value
Push-button D
- rapid access
to current functions
including time
Stopping the alarm
Press one of the four push-buttons.
Rapid access to functions
From any function, press push-button Dfor rapid access to the time display.
Press push-button Dto navigate rapidly between the active functions (e.g. an
active countdown).
Backlighting
From the watch function, press push-button Bto activate the backlighting.
D
C
A
B

6
Settings
To enter settings mode, press push-button Afor at least 2 seconds.
Press push-button Ato increase the value or push-button Cto decrease it.
Press and hold Aor C to scroll rapidly.
To confirm and move to the next setting, press push-button B.
To exit settings, press and hold push-button Bfor at least 2 seconds or, after
30 seconds of inactivity, the watch will automatically exit settings mode.
Inactivity
The watch returns to the time display after 3 minutes of inactivity from any
function.
Water resistance
The watch is guaranteed water-resistant to a depth of 5 ATM (160 feet/
50 meters).
Battery
The watch battery has an average life span of 4 years. Frequent use of the
functions (pedometer, backlighting) will significantly reduce its life span.

7
2 time zones,
hours, minutes and date
Hours, minutes 2 time zones,
hours, minutes
and seconds
Watch
The watch displays the hours, minutes and seconds as well as the date and
the month. It has two time zones, local time and world time (WT), for which a
reference city can be defined as well as summer time (DST (daylight saving time):
ON) or winter time (DST: OFF).
Display mode
Press push-button Ato alternate between display modes.
WT hours
WT
city
local hours local minutes
local
date
local
day
WT minutes local hours local minutes
local
seconds

8
Setting the time and other settings
To enter settings mode, press push-button Afor at least 2 seconds.
Press push-button Bto select the settings in the following order:
CITY CODE 2nd TIME ZONE DST 2nd TIME ZONE LOCAL CITY CODE
LOCAL DST HOUR MINUTE SECOND YEAR
MONTH DAY 12HR/24HR DISPLAY
Setting the 2nd time zone
1 Press push-button Aor Cto select the city in the 2nd time zone (see the table of
city codes on the next page), then press push-button Bto confirm the setting.
2 Press push-button Aor Cto activate or deactivate summer time (DST), then
press push-button Bto confirm the setting.
Setting the local time zone
1 Press push-button Aor Cto select the city in the local time zone (see the
table of city codes on the next page), then press push-button Bto confirm the
setting.
2 Press push-button Aor Cto activate or deactivate summer time (DST), then
press push-button Bto confirm the setting.
Setting the local time
1 Press push-button Aor Cto set the hours, then press push-button Bto confirm
the setting.
2 Press push-button Aor Cto set the minutes, then press push-button Bto
confirm the setting.
3 Press push-button Aor Cto set the seconds, then press push-button Bto
confirm the setting.

9
City code City Time difference Other cities in the same time zone
MDY MIDWAY ISLANDS -11
HNL HONOLULU, HI -10 PAPEETE
ANC ANCHORAGE -9 NOME
LAX BEVERLY HILLS, CA -8 VANCOUVER, LAS VEGAS, TIJUANA
ASE ASPEN, CO -7 EDMONTON, DENVER, PHOENIX
CHI+MEX CHICAGO, IL+ MEXICO CITY -6 HOUSTON, EL SALVADOR
NYC NEW YORK, NY -5 MONTREAL, DETROIT, BOSTON, MIAMI, BOGOTA, LIMA
CCS CARACAS -4.5
SCL SANTIAGO -4 LA PAZ, SANTO DOMINGO
SAO SAO PAULO -3 RIO DE JANEIRO, BUENOS AIRES, MONTEVIDEO
SAW GRYTVIKEN -2
AZR AZORES -1 PRAIA
LON LONDON 0LISBON, CASABLANCA, BAMAKO, DAKAR
ROM ROME 1ZÜRICH, BRUSSELS, VIENNA, BERLIN, PARIS, STOCKHOLM, MILAN, MADRID
ATH ATHENS 2HELSINKI, CAIRO, TEL AVIV, JOHANNESBURG, BEIRUT
JED JEDDAH 3ST. PETERSBURG, RIYADH, NAIROBI, ADDIS ABABA, KUWEIT
MSK MOSCOW 4ABU DHABI, MUSCAT
KHI KARACHI 5MALE, TASHKENT
DEL NEW DELHI 5.5 MUMBAI, COLOMBO
DAC DHAKA 6
BKK BANGKOK 7PHNOM PENH, JAKARTA, HANOI
HKG HONG KONG 8BEIJING, SHANGHAI, SINGAPORE, MANILA, TAIPEI, KUALA LUMPUR, PERTH
TYO+SEL TOKYO + SEOUL 9PYONGYANG
SYD SYDNEY 10 VLADIVOSTOK, MELBOURNE
NOU NOUMEA 11 PORT VILA
AKL AUCKLAND 12 WELLINGTON, NAURU ISLAND
Note: Global GMT times may be subject to change. You can check the GMT time of the
2nd time zone at www.greenwichmeantime.com (for example).

10
Country City City code GMT
NORTH AMERICA MIDWAY ISLANDS MIDWAY ISLANDS MDY -11
UNITED STATES HONOLULU, HI HNL -10
UNITED STATES ANCHORAGE ANC -9
UNITED STATES BEVERLY HILLS, CA LAX -8
UNITED STATES ASPEN, CO ASE -7
UNITED STATES CHICAGO, IL CHI -6
MEXICO MEXICO CITY MEX -6
UNITED STATES NEW YORK, NY NYC -5
SOUTH AMERICA VENEZUELA CARACAS CCS -4.5
CHILE SANTIAGO SCL -4
BRAZIL SAO PAULO SAO -3
SANDWICH ISLANDS GRYTVIKEN SAW -2
EUROPE PORTUGAL AZORES AZR -1
UNITED KINGDOM LONDON LON 0
ITALY ROME ROM 1
GREECE ATHENS ATH 2
RUSSIA MOSCOW MSK 4
MIDDLE EAST UAE JEDDAH JED 3
ASIA PAKISTAN KARACHI KHI 5
INDIA NEW DELHI DEL 5.5
BANGLADESH DHAKA DAC 6
THAILAND BANGKOK BKK 7
CHINA HONG KONG HKG 8
JAPAN TOKYO TYO 9
SOUTH KOREA SEOUL SEL 9
OCEANIA AUSTRALIA SYDNEY SYD 10
NEW CALEDONIA NOUMEA NOU 11
NEW ZEALAND AUCKLAND AKL 12
Please note that the time zones are based on world time GMT at the time of production. However,
some countries may decide to change their time zone at any time. As a result, previous versions of the
I-Gucci may vary slightly.
Note: Global GMT times may be subject to change. You can check the GMT time of the
2nd time zone at www.greenwichmeantime.com (for example).

11
Setting the date
1 Press push-button Aor Cto set the year, then press push-button Bto confirm
the setting.
2 Press push-button Aor Cto set the month, then press push-button Bto confirm
the setting.
3 Press push-button Aor Cto set the day, then press push-button Bto confirm
the setting.
The watch calendar is programmed up to 2099.
Setting the time format
1 Press push-button Aor Cto set the time format to 12hr or 24hr, then press
push-button Bto confirm the setting.
To exit settings, press and hold push-button B for at least 2 seconds.

12
Alarm (ALM)
The watch has a daily alarm for the local time zone.
Setting the alarm
1 Press and hold push-button Afor at least 2 seconds, the words ON/OFF flash.
2 Press push-button Ato activate the alarm (ON) or deactivate it (OFF), then press
push-button Bto confirm the setting.
3 Press push-button A(+) or C(–) to adjust the hours, then press push-button B
to confirm the setting.
4 Press push-button A(+) or C(–) to adjust the minutes, then press push-button
Bto confirm the setting.
To exit settings, press and hold push-button B for at least 2 seconds.
If the time of the alarm is changed, the alarm is activated automatically.
When the alarm is activated, the pictogram is displayed on the screen in
all functions.
alarm hours alarm minutes
alarm icon
local hours local minutes
local seconds

13
Chronograph (CH1)
This function displays the time in minutes, seconds and hundredths of a
second. The maximum time is 99 hours, 59 minutes, 59 seconds and
99 hundredths of a second.
1 Press push-button Ato start the chronograph.
2 To display split timing, press push-button B.
3 Press push-button Bagain to return to the current timing display.
4 Press push-button Ato stop timing; the screen displays the final time.
5 Press push-button Bto reset the chronograph to zero.
minuteshours
seconds 1/100th second

14
Double chronograph (CH2)
This function displays two chronographs simultaneously. The time elapsed
is displayed in minutes and seconds. The maximum time is 99 minutes and
59 seconds. After the second chronograph is stopped, the screen also
displays the time difference.
1 Press push-button Ato start the double chronograph.
2 Press push-button Ato stop the first time.
3 Press push-button Ato stop the second time. The time difference is displayed.
4 Press push-button Bto reset both chronographs to zero.
minutes
minutes
seconds
seconds
time difference
2nd time
1st time

15
Countdown (CTD)
This function displays the time elapsed in minutes and seconds. The maximum
countdown time is 99 minutes and 59 seconds. When the time has elapsed,
a 30-second alarm is triggered. Press one of the four push-buttons to stop this
manually.
Setting a predefined time
1 To enter setting mode, press and hold push-button Afor at least 2 seconds.
2 Press push-button A(+) or C(–) to set the minutes, then press push-button Bto
confirm the setting.
3 Press push-button A(+) or C(–) to set the seconds, then press push-button Bto
confirm the setting.
Use
1 Press push-button Ato start a countdown.
2 Pause the countdown by pressing push-button A. Press push-button Aagain to
continue the countdown.
3 Press push-button Athen Bto reset the countdown to zero.
minutes seconds
predefined time
countdown

16
Tachymeter (KMH)
This function calculates the average speed (in km/h) over a given distance.
The time elapsed is displayed in minutes and seconds up to 99 minutes and
59 seconds. The speed is measured in a range from 0.1 km/h to 999 km/h.
1 Press push-button Bto select the reference distance in the following order:
10M 50M 100M 400M 1,000M 5,000M 10,000M
USER VALUE
2 Press push-button Ato start the tachymeter chronograph.
3 After the predefined distance has been covered, press push-button Ato stop the
tachymeter chronograph. The average speed is displayed on the screen.
4 Press push-button Bto reset the tachymeter to zero.
Setting the user value
The distance can be defined from 1 to 99,999 metres.
1 To set the user value, press and hold push-button Afor at least 2 seconds.
The first digit flashes.
2 Press push-button A(+) or C(–) to adjust the value.
3 Press push-button Bthen push-button A(+) or C(–) in turn to adjust the next
digits.
4 To exit settings, press and hold push-button B for at least 2 seconds.
distance (m)
speed (km/h)
time elapsed (min, sec)

17
Pedometer (STP)
This function calculates the number of steps taken in a given time.
1 Press push-button Ato start the pedometer; the letters STP flash.
2 Press push-button Ato stop the pedometer; the letters STP stop flashing.
The number of steps taken is displayed on the screen.
3 Press push-button Bto reset the pedometer to zero.
Notes
The pedometer requires a delay of 20 steps before displaying the number of
steps taken on the screen.
The pedometer only operates correctly when walking. Intermediate journeys
in vehicles (car, bike, train, etc.) falsify the calculation.
number of steps

18
Regatta (SAI)
This function times the 5 minutes preceding the start of a regatta. An initial
one-second beep sounds 4 minutes before the start and a second 3-second
beep sounds 1 minute before the start. A long beep signals the start of the
regatta and the chronograph is activated automatically.
During the countdown, the indicators 5, 4, 1 then 0 flash in turn.
The timing is initially shown in minutes and seconds (the screen displays M-S)
then in hours and minutes (the screen displays H-M).
1 Press push-button Ato start the countdown.
2 Pause the countdown/chronograph by pressing push-button A. Press push-
button Aagain to continue the countdown/chronograph.
3 Press push-button Athen push-button Bto reset the countdown/chronograph to
zero.
local time
countdown
countdown
indicators
chronograph
(minutes/seconds)
chronograph
(hours/minutes)

19
Summary of important functions
1 Display mode
Press push-button Ato alternate between digital or analog display modes.
2 Access the various functions
Press push-button Cto display the functions in turn:
WATCH ALARM (ALM) CHRONOGRAPH (CH1) DOUBLE
CHRONOGRAPH (CH2) COUNTDOWN (CDT)
TACHYMETER (KMH) PEDOMETER (STP) REGATTA (SAI)
WATCH…
3 Rapid access to functions
From any function, press push-button Dfor rapid access to the time display.
Press push-button Dto navigate rapidly between the active functions (e.g. an
active countdown).
D
C
A
B

20
A
2 sec. Enter settings
2nd TIME ZONE
B
B
B
B
B
B
B
A
A
Select city
Select city
Set the hour
Set the minutes
Set the seconds
Activate/deactivate DST (Daylight Saving Time)
Activate/deactivate DST (Daylight Saving Time)
Confirm
Confirm
Confirm
Confirm
Confirm
Confirm
Confirm
C
2 sec. Exit settings
local time
A
A
A
A
A
C
C
C
C
C
4 Setting the time
Min.
Sec.
Hour