Guldmann Combi-lock User manual

Position the traverse rail so it is aligned with the
Combi-lock rail.
When the rails are aligned the safety gates
open automatically.
After checking that the Safety lock has engaged,
position yourself right behind or in front of the
hoist. It is now safe to manoeuver the hoist
through the Combi-lock, and on to the fixed or
traverse rail.
When the hoist has passed through the
Combi-lock it is safe to move the traverse rail.
Note: Do not move the traverse rail when the
hoist is in this position!
Quick Guide - Combi-lock
© Guldmann GB/US-04/2018 • # 900712

Quick Guide - Combi-lock
© Guldmann GB/US-04/2018 • # 900712
Place the hoist at the yellow marking approx. 1
meter from the end of the traverse rail and Combi
Lock.
Place the patient facing / looking lengthwise the
traverse rail and in a level where you can push /
hold as in the picture.
To align the rails and engage the Combi Lock
place yourself on the side of the patient so you
push or pull perpendicular on the traverse rail.
If the Combi Lock doesn’t engage the first time,
move the traverse rail approx. ½ to 1 meter
away from the Combi Lock rail and try again.
When the Combi Lock has engaged position
yourself behind the patient and push lengthwise
the traverse rail though the Combi Lock. The
patient is still facing / looking lengthwise the
traverse rail.