Guldmann 11346 User manual

1
GB/US . . . .Digital Scale
Vers. 1.00

2
GB/US . . . .Digital Scale
Item no.:
11346 & 113461
1.00.........PurposeandUse..............................................3
1.01.........Manufacturer..................................................3
1.02.........Description....................................................3
1.03.........Important/warning ..............................................3
2.00.........Descriptionoffunctions........................................4
2.01.........LabelsontheDigitalScale.......................................4
2.02.........Use..........................................................4
2.03.........Moreinformation...............................................5
3.00.........Operation ....................................................5
3.01.........Switchingon/weighing...........................................5
3.02.........Resetting/additiveweighing.......................................6
3.03.........Switchingoff...................................................6
3.04.........Errormessages................................................7
3.05 . . . . . . . . . Changing the unit (kg <--> Lb). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3.06.........Enhancedfunctions.............................................8
3.07 . . . . . . . . . Setting/modifying OFF time (Power Off) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3.08 . . . . . . . . . Filter setting/lter change.........................................9
4.00.........Transport ...................................................10
5.00.........Maintenanceandstorage......................................10
5.01.........Cleaning.....................................................10
5.02.........Storing......................................................10
6.00.........Battery......................................................10
6.01 . . . . . . . . . Disposing of the digital scale and batteries. . . . . . . . . . . . . . . . . . . . . . . . . . 10
7.00 . . . . . . . . . Technical specications .......................................11
8.00 . . . . . . . . . Calibration/verication of digital scale, item No. 11346 .............11
9.00 . . . . . . . . . EC declaration of conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
A............USERSGUIDEDigitalScale....................................17
B............WARRANTIES................................................17
© Guldmann GB/US-1250/08/08 • # 944124 © Guldmann GB/US-1250/08/08 • # 944124
© Guldmann GB/US-1250/08/08 • # 944124

3
1.00 Purpose and Use
1.01 Manufacturer
V. Guldmann A/S
Graham Bells Vej 21-23A
DK - 8200 Århus N
Tel. + 45 8741 3100
Fax. + 45 8741 3131
1.02 Description
The Digital Scale is a compact precision scale designed specially for use with
mobile and ceiling mounted hoists for disabled persons.
Completely self-adjusting, it combines the latest microprocessor technology
for measuring instruments and provides accurate repeated weight data with
a calibrated accuracy of 0.1%.
Automatic resetting with the help of a push button makes weighing patients
fast and easy.
1.03 Important/warning
• Read the user manual carefully before using the Digital Scale.
Safety instructions
• Please comply with the maximum capacity of the scale which is stated on the
identication plate on the back of the device.
The maximum load of 250 kg/550 lbs. / 320 kg/704 lbs. must not be
exceeded. The safety requirements and the notes on appropriate use
must also be observed.
• The device must not be modied in any way that changes its design or con-
struction with regard to safety without the express consent of the supplier.
Any modication exempts the supplier from liability for any damage as a
result of modication.
• It is strictly forbidden to carry out any repairs and soldering work on the
motherboards or to replace any components. Repairs must only be
undertaken by persons who are authorized and qualied to do so.
• Do not use the Digital Scale where there is a risk of water coming into
direct contact with it.
• The display is not impact-proof, do not drop it.
© Guldmann GB/US-1250/08/08 • # 944124 © Guldmann GB/US-1250/08/08 • # 944124
© Guldmann GB/US-1250/08/08 • # 944124

4
2.00 Description of functions
2.01 Labels on the Digital Scale
2.02 Use
1. Using the digital scale with a ceiling hoist
Attach the digital scale to the snap hook on
the ceiling hoist. Remove the spiral locking
ring and the split pin. Attach the lifting hanger
by inserting the split pin into the hook on the
lifting hanger and then inserting the spiral
locking ring.
Hang the required sling on the lifting hanger
and reset the digital scale to zero, see
section 3. The display will now show 0.0.
2. Using the digital scale with
a mobile person hoist
The digital scale is attached to the mobile
hoist with the help of the oval hook. Remove
the spiral locking ring and the split pin. Attach
the lifting hanger by inserting the split pin
into the hook on the lifting hanger and then
inserting the spiral locking ring.
Hang the required sling on the lifting hanger
and reset the digital scale to zero, see
section 3. The display will now show 0.0.
3. Remove the sling from the hanger, place the user in the sling and hang it on
the lifting hanger again.
4. Carefully lift the user. When the sling carrying the use is steady and freely
suspended, the total weight will now be shown on the display.
.O
V.Guldmann A/S, Graham Bells Vej 21-23A
DK-8200 Århus N, Tel. [phone]
© Guldmann GB/US-1250/08/08 • # 944124 © Guldmann GB/US-1250/08/08 • # 944124
© Guldmann GB/US-1250/08/08 • # 944124
Dialog
ON G/N
OFF
ON
OFF
G/N
0
/T
SLSC2MR
D04-09-023
M
HBM
Max1:
200kg
d1=e1:
100g
Min1:
2kg
Max2:
320kg
d2=e2:
200g
Min1:
4kg
Read�the�User´s�manual�prior�to�use
SLS
Max:
250kg�/�550lbs
e:
100g�/0,22lbs
Min:
2kg�/�4,4lbs
HBM
Read�the�User´s�manual�prior�to�use

5
Important
Always reset the scale to zero after weighing the patient.
Important
The power conserving function will automatically turn off the display after
30 seconds when there is no weight on the scale. This can be changed
– see section 3.07.
5. Carefully lower the user after reading the weight.
Caution
This device is intended to weigh patients during transfer (i.e.: bed to chair).
In case the lifting height is reduced, it may be necessary to split the process
in two. Start by weighing the user and remove the device, then make the nal
transfer (i.e. bed to chair). This device is NOT intended for use during patient
transport and should be removed when moving a patient.
2.03 More information
If you have any questions or comments regarding the operation of the
Guldmann Digital Scale, please contact your distributor.
3.00 Operation
3.01 Switching on/weighing
The scale is ready to use about 10 seconds after it has been switched on.
During this time, the scale must neither be moved nor subjected to a load!
Switch on the scale
Display segment test
(~5 seconds)
Automatic resetting 1)
(~3 seconds)
Then all segments go off
(~2 seconds)
The scale is ready to use.
You can now use the scale.
please wait
please wait
© Guldmann GB/US-1250/08/08 • # 944124 © Guldmann GB/US-1250/08/08 • # 944124
© Guldmann GB/US-1250/08/08 • # 944124

6
1) If the scale is switched on carrying a load (tare) of more than 20% of the
weighing range, automatic resetting to zero will not take place. In this case,
resetting must be performed manually (see chapter 3.02).
3.02 Resetting/additive weighing
Switch on the scale and wait ~10 seconds (see chapter 3.01).
Add the weight to be tared (e.g. belt).
Resetting to zero
It is now possible to weigh the person
with and without the sling
Keep pressing the G/N key to toggle between the scale zero and the gross
weight.
Add more of the weight to be reset.
Resetting to zero
It is now possible to weigh the person
with and without the sling
The rst time the G/N key is pressed, the current total (gross) weight is dis-
played. Resetting to zero occurs when the G/N key is pressed again. You
can repeat this as often as you like until the maximum weighing range of the
scale is reached.
3.03 Switching off
Press the ON/OFF key to
switch off the scale
© Guldmann GB/US-1250/08/08 • # 944124 © Guldmann GB/US-1250/08/08 • # 944124
© Guldmann GB/US-1250/08/08 • # 944124

7
3.04 Error messages
Overload Scale overloaded!
Please comply with the rated load for the
scale (see identication plate on the back
of the device)
Underload Switch the scale off and on again.
Battery status
The batteries must be replaced!
3.05 Changing the unit (kg <--> Lb)
Switch on the scale and wait ~10 seconds (see chapter 3.01).
Unit kg
Continue pressing for ~5 seconds
Unit Lb (American pounds)
The same method is used to change from Lb to kg.
The last unit set is retained even when the scale is switched off.
© Guldmann GB/US-1250/08/08 • # 944124 © Guldmann GB/US-1250/08/08 • # 944124
© Guldmann GB/US-1250/08/08 • # 944124

8
3.06 Enhanced functions
3.07 Setting/modifying OFF time (Power Off)
Switch on the scale and wait ~10 seconds (see chapter 3.01).
Simultaneously pressing the ON/OFF and G/N keys enables standard
function.
.
press
simultan-
eously
Standard function
OFF time (Power Off = automatic switching
off)
Select by repeatedly pressing the
ON/OFF key (digit ashes):
Can only be switched off manually
(by means of the ON/OFF key)
Switches off automatically after 30 secs.
(only if the scale is unloaded)
Switches off automatically after 60 secs.
(only if the scale is unloaded)
Conrm the selection with the G/N key
At this point, you can check or change PO
by pressing ON/OFF again.
Pressing once: Filter setting AF or pressing twice:
(see next page) back to weighing mode
© Guldmann GB/US-1250/08/08 • # 944124 © Guldmann GB/US-1250/08/08 • # 944124
© Guldmann GB/US-1250/08/08 • # 944124

9
3.08 Filter setting/lter change
(Stabilizing the weight display)
Switch on the scale and wait ~10 seconds (see chapter 2.01).
Simultaneously pressing the ON/OFF and G/N keys enables standard
function
Press
simultan-
eously
Standard function
Filter setting (amplier lter)
Select by repeatedly pressing
the ON/OFF key (digit ashes):
0= Filtering switched off
1 = low ltering:
+ very rapid weight display
-- the display ickers when the scale is
moved
4 = average ltering (recommended):
+ fast weight display
+ steady display
8 = very strong ltering:
+ Possible to weigh people who are unable
to keep still
-- long waiting time until the weight or the
zero-point of the scale is displayed steadily
Conrm the selection and conrm the
settings with the G/N key
At this point, you can check or change AF
by pressing ON/OFF again
Back to weighing mode
You can now use the scale
© Guldmann GB/US-1250/08/08 • # 944124 © Guldmann GB/US-1250/08/08 • # 944124
© Guldmann GB/US-1250/08/08 • # 944124

10
4.00 Transport
Guldmann recommends that the Digital Scale be transported in its original
packaging.
5.00 Maintenance and storage
5.01 Cleaning
It is only necessary to wipe the apparatus carefully with a damp cloth. Never
use abrasive or caustic detergents.
5.02 Storing
The Digital Scale should be kept in a dry room
6.00 Battery
The digital scale is powered by four 1.5 V type AA batteries, and they have
a useful lifetime of approximately 400 hours. Lines will appear on the display
when it is necessary to replace the batteries, see section (3.04).
Replacing batteries
Unscrew the right-hand cover and insert the battery holder with batteries (4 x
1.5V - type AA), and make sure that they are inserted correctly as shown on
the apparatus! Press the tray into the battery aperture and screw the cover
on. The scale is now ready for use.
6.01 Disposing of the digital scale and batteries
Always comply with local and national rules. Batteries must always be delive-
red to an approved recycling depot.
© Guldmann GB/US-1250/08/08 • # 944124 © Guldmann GB/US-1250/08/08 • # 944124
© Guldmann GB/US-1250/08/08 • # 944124